Skip to content

Latest commit

 

History

History
175 lines (120 loc) · 7.48 KB

build-windows.md

File metadata and controls

175 lines (120 loc) · 7.48 KB
Raw

WINDOWS BUILD NOTES

Below are some notes on how to build Baricoin Core for Windows.

The options known to work for building Baricoin Core on Windows are:

  • On Linux, using the Mingw-w64 cross compiler tool chain. Ubuntu Bionic 18.04 is required and is the platform used to build the Baricoin Core Windows release binaries.
  • On Windows, using Windows Subsystem for Linux (WSL) and the Mingw-w64 cross compiler tool chain.
  • On Windows, using a native compiler tool chain such as Visual Studio.

Other options which may work, but which have not been extensively tested are (please contribute instructions):

  • On Windows, using a POSIX compatibility layer application such as cygwin or msys2.

Installing Windows Subsystem for Linux

With Windows 10, Microsoft has released a new feature named the Windows Subsystem for Linux (WSL). This feature allows you to run a bash shell directly on Windows in an Ubuntu-based environment. Within this environment you can cross compile for Windows without the need for a separate Linux VM or server. Note that while WSL can be installed with other Linux variants, such as OpenSUSE, the following instructions have only been tested with Ubuntu.

This feature is not supported in versions of Windows prior to Windows 10 or on Windows Server SKUs. In addition, it is available only for 64-bit versions of Windows.

Full instructions to install WSL are available on the above link. To install WSL on Windows 10 with Fall Creators Update installed (version >= 16215.0) do the following:

  1. Enable the Windows Subsystem for Linux feature
  • Open the Windows Features dialog (OptionalFeatures.exe)
  • Enable 'Windows Subsystem for Linux'
  • Click 'OK' and restart if necessary
  1. Install Ubuntu
  • Open Microsoft Store and search for "Ubuntu 18.04" or use this link
  • Click Install
  1. Complete Installation
  • Open a cmd prompt and type "Ubuntu1804"
  • Create a new UNIX user account (this is a separate account from your Windows account)

After the bash shell is active, you can follow the instructions below, starting with the "Cross-compilation" section. Compiling the 64-bit version is recommended, but it is possible to compile the 32-bit version.

Cross-compilation for Ubuntu and Windows Subsystem for Linux

The steps below can be performed on Ubuntu (including in a VM) or WSL. The depends system will also work on other Linux distributions, however the commands for installing the toolchain will be different.

First, install the general dependencies:

sudo apt update
sudo apt upgrade
sudo apt install build-essential libtool autotools-dev automake pkg-config bsdmainutils curl git

A host toolchain (build-essential) is necessary because some dependency packages need to build host utilities that are used in the build process.

See dependencies.md for a complete overview.

If you want to build the windows installer with make deploy you need NSIS:

sudo apt install nsis

Acquire the source in the usual way:

git clone https://github.com/asuka431/baricoin.git
cd baricoin

Building for 64-bit Windows

The first step is to install the mingw-w64 cross-compilation tool chain:

sudo apt install g++-mingw-w64-x86-64

Ubuntu Bionic 18.04 1:

sudo update-alternatives --config x86_64-w64-mingw32-g++ # Set the default mingw32 g++ compiler option to posix.

Once the toolchain is installed the build steps are common:

Note that for WSL the Baricoin Core source path MUST be somewhere in the default mount file system, for example /usr/src/baricoin, AND not under /mnt/d/. If this is not the case the dependency autoconf scripts will fail. This means you cannot use a directory that is located directly on the host Windows file system to perform the build.

Acquire the source in the usual way:

git clone https://github.com/asuka431/baricoin.git

Once the source code is ready the build steps are below:

Do not compile tests and bench.

PATH=$(echo "$PATH" | sed -e 's/:\/mnt.*//g') # strip out problematic Windows %PATH% imported var, not required for Ubuntu
cd depends
make HOST=x86_64-w64-mingw32
cd ..
mkdir dist
./autogen.sh
CONFIG_SITE=$PWD/depends/x86_64-w64-mingw32/share/config.site ./configure --prefix=$PWD/dist --disable-tests --disable-bench --disable-dependency-tracking
make install
cd dist/bin
strip baricoin-cli.exe baricoind.exe baricoin-qt.exe baricoin-tx.exe

Building for 32-bit Windows

To build executables for Windows 32-bit, install the following dependencies:

sudo apt install g++-mingw-w64-i686 mingw-w64-i686-dev

For Ubuntu Bionic 18.04 and Windows Subsystem for Linux 1:

sudo update-alternatives --config i686-w64-mingw32-g++  # Set the default mingw32 g++ compiler option to posix.

Note that for WSL the Baricoin Core source path MUST be somewhere in the default mount file system, for example /usr/src/baricoin, AND not under /mnt/d/. If this is not the case the dependency autoconf scripts will fail. This means you cannot use a directory that located directly on the host Windows file system to perform the build.

Acquire the source in the usual way:

git clone https://github.com/asuka431/baricoin.git

Then build using:

Do not compile tests and bench.

PATH=$(echo "$PATH" | sed -e 's/:\/mnt.*//g') # strip out problematic Windows %PATH% imported var, not required for Ubuntu
cd depends
make HOST=i686-w64-mingw32
cd ..
mkdir dist
./autogen.sh
CONFIG_SITE=$PWD/depends/i686-w64-mingw32/share/config.site ./configure --prefix=$PWD/dist --disable-tests --disable-bench --disable-dependency-tracking
strip src/baricoin-cli.exe src/baricoin-tx.exe src/baricoind.exe src/qt/baricoin-qt.exe
make install
cd dist/bin
strip baricoin-cli.exe baricoind.exe baricoin-qt.exe baricoin-tx.exe

Depends system

For further documentation on the depends system see README.md in the depends directory.

Installation

After building using the Windows subsystem it can be useful to copy the compiled executables to a directory on the Windows drive in the same directory structure as they appear in the release .zip archive. This can be done in the following way. This will install to c:\workspace\baricoin, for example:

make install DESTDIR=/mnt/c/workspace/baricoin

You can also create an installer using:

make deploy

Footnotes

1: Starting from Ubuntu Xenial 16.04, both the 32 and 64 bit Mingw-w64 packages install two different compiler options to allow a choice between either posix or win32 threads. The default option is win32 threads which is the more efficient since it will result in binary code that links directly with the Windows kernel32.lib. Unfortunately, the headers required to support win32 threads conflict with some of the classes in the C++11 standard library, in particular std::mutex. It's not possible to build the Baricoin Core code using the win32 version of the Mingw-w64 cross compilers (at least not without modifying headers in the Baricoin Core source code).