Skip to content

Latest commit

 

History

History
83 lines (47 loc) · 4.13 KB

README.md

File metadata and controls

83 lines (47 loc) · 4.13 KB
Raw

Magnetic stripe reader sample

This sample shows how to create a magnetic stripe reader, claim it for exclusive use, enable it to receive data, and read data from a bank card or a motor vehicle card. This sample uses Windows.Devices.PointOfService API.

Specifically, this sample shows how to:

  1. Get the magnetic stripe reader

    Uses the MagneticStripeReader.GetDefaultAsync method to get the first available magnetic stripe reader.

  2. Claim the magnetic stripe reader for exclusive use

    Uses ClaimReaderAsync to claim the device.

  3. Add event handlers

    Uses BankCardDataReceived, AamvaCardDataReceived, and ReleaseDeviceRequested events.

    When an application gets a request from another application to release its exclusive claim to the magnetic stripe reader, it must handle the request by retaining the device; otherwise, it will lose its claim. The event handler for ReleaseDeviceRequested shows how to do this.

  4. Enable the device to receive data

    Uses EnableAsync.

The app package manifest shows how to specify the device capability name for the Point of Service (POS) devices. All POS apps are required declare DeviceCapability in the app package manifest, either by using "PointofService" as shown in this sample or by using device specific GUID, such as "2A9FE532-0CDC-44F9-9827-76192F2CA2FB" for a magnetic stripe reader.

The following list shows the magnetic stripe readers that were used with this code sample:

  • MagTek MagneSafe HID USB reader (VID 0801, PID 0011)
  • MagTek SureSwipe HID USB reader ( VID 0801, PID 0002)
  • MagTek BulleT Bluetooth/USB reader, when connected via USB (VID 0801, PID 0011)
  • ID TECH SecureMag HID USB reader (VID 0ACD, PID 2010)
  • ID TECH MiniMag HID USB reader (VID 0ACD, PID 0500)

Note The Windows universal samples require Visual Studio 2015 to build and Windows 10 to execute.

To obtain information about Windows 10 development, go to the Windows Dev Center

To obtain information about Microsoft Visual Studio 2015 and the tools for developing Windows apps, go to Visual Studio 2015

Related topics

Samples

Magnetic Stripe Reader sample

Reference

Windows.Devices.PointOfService

Windows app samples

System requirements

Client: Windows 10

Server: Windows Server 2016 Technical Preview

Phone: Windows 10

Build the sample

  1. If you download the samples ZIP, be sure to unzip the entire archive, not just the folder with the sample you want to build.
  2. Start Microsoft Visual Studio 2015 and select File > Open > Project/Solution.
  3. Starting in the folder where you unzipped the samples, go to the Samples subfolder, then the subfolder for this specific sample, then the subfolder for your preferred language (C++, C#, or JavaScript). Double-click the Visual Studio 2015 Solution (.sln) file.
  4. Press Ctrl+Shift+B, or select Build > Build Solution.

Run the sample

The next steps depend on whether you just want to deploy the sample or you want to both deploy and run it.

Deploying the sample

  • Select Build > Deploy Solution.

Deploying and running the sample

  • To debug the sample and then run it, press F5 or select Debug > Start Debugging. To run the sample without debugging, press Ctrl+F5 or selectDebug > Start Without Debugging.