Tempest Rain Accumulated Fails for those outside US/Canada #42
Description
Hi
Well done on the Python3 version. All going well.
Yet - for sometime have been troubled with null/empty daily rainfall totals for Websocket Tempest
Had a look and stems from non-US location and likely affects all the sky devices as well.
Tempest (type="obs_st")
Observation Layout
0 - Epoch (Seconds UTC)
1 - Wind Lull (m/s)
2 - Wind Avg (m/s)
3 - Wind Gust (m/s)
4 - Wind Direction (degrees)
5 - Wind Sample Interval (seconds)
6 - Pressure (MB)
7 - Air Temperature (C)
8 - Relative Humidity (%)
9 - Illuminance (lux)
10 - UV (index)
11 - Solar Radiation (W/m^2)
12 - Rain Accumulation (mm)
13 - Precipitation Type (0 = none, 1 = rain, 2 = hail, 3 = rain + hail (experimental))
14 - Average Strike Distance (km)
15 - Strike Count
16 - Battery (volts)
17 - Report Interval (minutes)
18 - Local Day Rain Accumulation (mm)
19 - [NC Rain](https://help.weatherflow.com/hc/en-us/articles/360024436634) Accumulation (mm)
20 - Local Day [NC Rain](https://help.weatherflow.com/hc/en-us/articles/360024436634) Accumulation (mm)
21 - Precipitation Aanalysis Type (0 = none, 1 = Rain Check with user display on, 2 = Rain Check with user display off)
Index 19 and 20 - currently:
'report_interval': 17,
'rain_accumulated_final': 19,
in obs_tempest_map are the problematic ones.
The [NC Rain] is Neighborhood level rain - only available in US and Canada.
Changing the obs_tempest_map with rain_accumulated_final to index 18 (non NC Rain version) for those of us outside US/Canada fixes the rain_accumulation reporting in my testing.
Thanks