diff --git a/Documentation/testcases/attribute/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_3_4.ids b/Documentation/testcases/attribute/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_3_4.ids deleted file mode 100644 index 942c7a3..0000000 --- a/Documentation/testcases/attribute/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_3_4.ids +++ /dev/null @@ -1,28 +0,0 @@ - - - - Floating point numbers are compared with a 1e-6 tolerance 3/4 - Generated via code automation in the Ids Repository on github. - - - - - - - IFCSURFACESTYLEREFRACTION - - - - - - - RefractionIndex - - - 42. - - - - - - \ No newline at end of file diff --git a/Documentation/testcases/attribute/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_3_4.ifc b/Documentation/testcases/attribute/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_3_4.ifc deleted file mode 100644 index e818d7a..0000000 --- a/Documentation/testcases/attribute/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_3_4.ifc +++ /dev/null @@ -1,12 +0,0 @@ -ISO-10303-21; -HEADER; -FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); -FILE_NAME('','2022-10-07T13:48:42',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); -FILE_SCHEMA(('IFC4')); -ENDSEC; -DATA; -#1=IFCSURFACESTYLEREFRACTION(42.000042,$); -#2=IFCSURFACESTYLEREFRACTION(41.999958,$); -#3=IFCSURFACESTYLEREFRACTION(42.000084,$); -ENDSEC; -END-ISO-10303-21; diff --git a/Documentation/testcases/attribute/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_4_4.ifc b/Documentation/testcases/attribute/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_4_4.ifc deleted file mode 100644 index 7a9ca79..0000000 --- a/Documentation/testcases/attribute/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_4_4.ifc +++ /dev/null @@ -1,13 +0,0 @@ -ISO-10303-21; -HEADER; -FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); -FILE_NAME('','2022-10-07T13:48:42',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); -FILE_SCHEMA(('IFC4')); -ENDSEC; -DATA; -#1=IFCSURFACESTYLEREFRACTION(42.000042,$); -#2=IFCSURFACESTYLEREFRACTION(41.999958,$); -#3=IFCSURFACESTYLEREFRACTION(42.000084,$); -#4=IFCSURFACESTYLEREFRACTION(41.999916,$); -ENDSEC; -END-ISO-10303-21; diff --git a/Documentation/testcases/attribute/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.ids b/Documentation/testcases/attribute/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.ids deleted file mode 100644 index 6d38c81..0000000 --- a/Documentation/testcases/attribute/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.ids +++ /dev/null @@ -1,28 +0,0 @@ - - - - Floating point numbers are compared with a 1e-6 tolerance 1/4 - Generated via code automation in the Ids Repository on github. - - - - - - - IFCSURFACESTYLEREFRACTION - - - - - - - RefractionIndex - - - 42. - - - - - - \ No newline at end of file diff --git a/Documentation/testcases/attribute/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.ifc b/Documentation/testcases/attribute/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.ifc deleted file mode 100644 index 77989dd..0000000 --- a/Documentation/testcases/attribute/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.ifc +++ /dev/null @@ -1,10 +0,0 @@ -ISO-10303-21; -HEADER; -FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); -FILE_NAME('','2022-10-07T13:48:42',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); -FILE_SCHEMA(('IFC4')); -ENDSEC; -DATA; -#1=IFCSURFACESTYLEREFRACTION(42.000042,$); -ENDSEC; -END-ISO-10303-21; diff --git a/Documentation/testcases/attribute/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.ifc b/Documentation/testcases/attribute/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.ifc deleted file mode 100644 index 9937075..0000000 --- a/Documentation/testcases/attribute/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.ifc +++ /dev/null @@ -1,11 +0,0 @@ -ISO-10303-21; -HEADER; -FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); -FILE_NAME('','2022-10-07T13:48:42',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); -FILE_SCHEMA(('IFC4')); -ENDSEC; -DATA; -#1=IFCSURFACESTYLEREFRACTION(42.000042,$); -#2=IFCSURFACESTYLEREFRACTION(41.999958,$); -ENDSEC; -END-ISO-10303-21; diff --git a/Documentation/testcases/property/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.html b/Documentation/testcases/property/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.html new file mode 100644 index 0000000..df4aeb6 --- /dev/null +++ b/Documentation/testcases/property/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.html @@ -0,0 +1,21 @@ + + + Comparison report for property\pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.ids + + + +

Comparison report for property\pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.ids

+

Script

+ 
+``` ids property\pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.ids
+Floating point numbers are compared with a 1e-6 tolerance 1/4
+Entity: ''IFCWALL''
+Requirements:
+Property: ''Foo_Bar'',''Foo'',IFCREAL,''42.''
+```
+
+

Comparison to original IDS

+ <?xml version="1.0" encoding="utf-16"?>
<ids xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xsi:schemaLocation="http://standards.buildingsmart.org/IDS http://standards.buildingsmart.org/IDS/0.9.7/ids.xsd" xmlns="http://standards.buildingsmart.org/IDS">
<info>
<title>Floating point numbers are compared with a 1e-6 tolerance 1/4</title>
<description>Generated via code automation in the Ids Repository on github.</description>
</info>
<specifications>
<specification
name="Floating point numbers are compared with a 1e-6 tolerance 1/4"
ifcVersion="IFC2X3 IFC4">
<applicability
maxOccurs="unbounded">
<entity>
<name>
<simpleValue>IFCWALL</simpleValue>
</name>
</entity>
</applicability>
<requirements>
<property
dataType="IFCREAL">
<propertySet>
<simpleValue>Foo_Bar</simpleValue>
</propertySet>
<baseName>
<simpleValue>Foo</simpleValue>
</baseName>
<value>
<simpleValue>42.</simpleValue>
</value>
</property>
</requirements>
</specification>
</specifications>
</ids> + + + \ No newline at end of file diff --git a/Documentation/testcases/property/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.html b/Documentation/testcases/property/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.html new file mode 100644 index 0000000..26d3043 --- /dev/null +++ b/Documentation/testcases/property/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.html @@ -0,0 +1,21 @@ + + + Comparison report for property\pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.ids + + + +

Comparison report for property\pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.ids

+

Script

+ 
+``` ids property\pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.ids
+Floating point numbers are compared with a 1e-6 tolerance 2/4
+Entity: ''IFCWALL''
+Requirements:
+Property: ''Foo_Bar'',''Foo'',IFCREAL,''42.''
+```
+
+

Comparison to original IDS

+ <?xml version="1.0" encoding="utf-16"?>
<ids xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xsi:schemaLocation="http://standards.buildingsmart.org/IDS http://standards.buildingsmart.org/IDS/0.9.7/ids.xsd" xmlns="http://standards.buildingsmart.org/IDS">
<info>
<title>Floating point numbers are compared with a 1e-6 tolerance 2/4</title>
<description>Generated via code automation in the Ids Repository on github.</description>
</info>
<specifications>
<specification
name="Floating point numbers are compared with a 1e-6 tolerance 2/4"
ifcVersion="IFC2X3 IFC4">
<applicability
maxOccurs="unbounded">
<entity>
<name>
<simpleValue>IFCWALL</simpleValue>
</name>
</entity>
</applicability>
<requirements>
<property
dataType="IFCREAL">
<propertySet>
<simpleValue>Foo_Bar</simpleValue>
</propertySet>
<baseName>
<simpleValue>Foo</simpleValue>
</baseName>
<value>
<simpleValue>42.</simpleValue>
</value>
</property>
</requirements>
</specification>
</specifications>
</ids> + + + \ No newline at end of file diff --git a/Documentation/testcases/scripts.md b/Documentation/testcases/scripts.md index d052df3..d0869b0 100644 --- a/Documentation/testcases/scripts.md +++ b/Documentation/testcases/scripts.md @@ -290,42 +290,6 @@ Requirements: Attribute: ''ScheduleDuration'',''PT16H'' ``` -### Floating point numbers are compared with a 1e-6 tolerance 1/4 - -``` ids attribute/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.ids -Floating point numbers are compared with a 1e-6 tolerance 1/4 -Entity: ''IFCSURFACESTYLEREFRACTION'' -Requirements: -Attribute: ''RefractionIndex'',''42.'' -``` - -### Floating point numbers are compared with a 1e-6 tolerance 2/4 - -``` ids attribute/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.ids -Floating point numbers are compared with a 1e-6 tolerance 2/4 -Entity: ''IFCSURFACESTYLEREFRACTION'' -Requirements: -Attribute: ''RefractionIndex'',''42.'' -``` - -### Floating point numbers are compared with a 1e-6 tolerance 3/4 - -``` ids attribute/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_3_4.ids -Floating point numbers are compared with a 1e-6 tolerance 3/4 -Entity: ''IFCSURFACESTYLEREFRACTION'' -Requirements: -Attribute: ''RefractionIndex'',''42.'' -``` - -### Floating point numbers are compared with a 1e-6 tolerance 4/4 - -``` ids attribute/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_4_4.ids -Floating point numbers are compared with a 1e-6 tolerance 4/4 -Entity: ''IFCSURFACESTYLEREFRACTION'' -Requirements: -Attribute: ''RefractionIndex'',''42.'' -``` - ### GlobalIds are treated as strings and not expanded ``` ids attribute/pass-globalids_are_treated_as_strings_and_not_expanded.ids @@ -2173,42 +2137,6 @@ Requirements: Property: ''Foo_Bar'',''Foo'',IFCLABEL ``` -### Floating point numbers are compared with a 1e-6 tolerance 1/4 - -``` ids property/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.ids -Floating point numbers are compared with a 1e-6 tolerance 1/4 -Entity: ''IFCWALL'' -Requirements: -Property: ''Foo_Bar'',''Foo'',IFCREAL,''42.'' -``` - -### Floating point numbers are compared with a 1e-6 tolerance 2/4 - -``` ids property/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.ids -Floating point numbers are compared with a 1e-6 tolerance 2/4 -Entity: ''IFCWALL'' -Requirements: -Property: ''Foo_Bar'',''Foo'',IFCREAL,''42.'' -``` - -### Floating point numbers are compared with a 1e-6 tolerance 3/4 - -``` ids property/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_3_4.ids -Floating point numbers are compared with a 1e-6 tolerance 3/4 -Entity: ''IFCWALL'' -Requirements: -Property: ''Foo_Bar'',''Foo'',IFCREAL,''42.'' -``` - -### Floating point numbers are compared with a 1e-6 tolerance 4/4 - -``` ids property/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_4_4.ids -Floating point numbers are compared with a 1e-6 tolerance 4/4 -Entity: ''IFCWALL'' -Requirements: -Property: ''Foo_Bar'',''Foo'',IFCREAL,''42.'' -``` - ### IDS does not handle string truncation such as for identifiers ``` ids property/fail-ids_does_not_handle_string_truncation_such_as_for_identifiers.ids @@ -2705,3 +2633,330 @@ Entity: ''IFCWALL'' Requirements: Attribute: ''Name'',Pattern(''[A-Z]{2}[0-9]{2}'') ``` + +## tolerance + +### Comparison tolerance for floating point positive high number lower bound + +``` ids tolerance/pass-comparison_tolerance_for_floating_point_positive_high_number_lower_bound.ids +Comparison tolerance for floating point positive high number lower bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''100000.'' +``` + +### Comparison tolerance for floating point positive high number lower bound + +``` ids tolerance/fail-comparison_tolerance_for_floating_point_positive_high_number_lower_bound.ids +Comparison tolerance for floating point positive high number lower bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''100000.'' +``` + +### Comparison tolerance for floating point positive high number upper bound + +``` ids tolerance/pass-comparison_tolerance_for_floating_point_positive_high_number_upper_bound.ids +Comparison tolerance for floating point positive high number upper bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''100000.'' +``` + +### Comparison tolerance for floating point positive high number upper bound + +``` ids tolerance/fail-comparison_tolerance_for_floating_point_positive_high_number_upper_bound.ids +Comparison tolerance for floating point positive high number upper bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''100000.'' +``` + +### Comparison tolerance for floating point one lower bound + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_one_lower_bound.ids +Comparison tolerance for floating point one lower bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''1.'' +``` + +### Comparison tolerance for floating point one lower bound + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_one_lower_bound.ids +Comparison tolerance for floating point one lower bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''1.'' +``` + +### Comparison tolerance for floating point one upper bound + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_one_upper_bound.ids +Comparison tolerance for floating point one upper bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''1.'' +``` + +### Comparison tolerance for floating point one upper bound + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_one_upper_bound.ids +Comparison tolerance for floating point one upper bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''1.'' +``` + +### Comparison tolerance for floating point positive low number lower bound + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_positive_low_number_lower_bound.ids +Comparison tolerance for floating point positive low number lower bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''0.0000001'' +``` + +### Comparison tolerance for floating point positive low number lower bound + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_positive_low_number_lower_bound.ids +Comparison tolerance for floating point positive low number lower bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''0.0000001'' +``` + +### Comparison tolerance for floating point positive low number upper bound + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_positive_low_number_upper_bound.ids +Comparison tolerance for floating point positive low number upper bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''0.0000001'' +``` + +### Comparison tolerance for floating point positive low number upper bound + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_positive_low_number_upper_bound.ids +Comparison tolerance for floating point positive low number upper bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''0.0000001'' +``` + +### Comparison tolerance for floating point zero lower bound + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_zero_lower_bound.ids +Comparison tolerance for floating point zero lower bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''0.'' +``` + +### Comparison tolerance for floating point zero lower bound + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_zero_lower_bound.ids +Comparison tolerance for floating point zero lower bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''0.'' +``` + +### Comparison tolerance for floating point zero upper bound + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_zero_upper_bound.ids +Comparison tolerance for floating point zero upper bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''0.'' +``` + +### Comparison tolerance for floating point zero upper bound + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_zero_upper_bound.ids +Comparison tolerance for floating point zero upper bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''0.'' +``` + +### Comparison tolerance for floating point negative low number lower bound + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_negative_low_number_lower_bound.ids +Comparison tolerance for floating point negative low number lower bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''-0.0000001'' +``` + +### Comparison tolerance for floating point negative low number lower bound + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_negative_low_number_lower_bound.ids +Comparison tolerance for floating point negative low number lower bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''-0.0000001'' +``` + +### Comparison tolerance for floating point negative low number upper bound + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_negative_low_number_upper_bound.ids +Comparison tolerance for floating point negative low number upper bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''-0.0000001'' +``` + +### Comparison tolerance for floating point negative low number upper bound + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_negative_low_number_upper_bound.ids +Comparison tolerance for floating point negative low number upper bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''-0.0000001'' +``` + +### Comparison tolerance for floating point negative one lower bound + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_negative_one_lower_bound.ids +Comparison tolerance for floating point negative one lower bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''-1.'' +``` + +### Comparison tolerance for floating point negative one lower bound + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_negative_one_lower_bound.ids +Comparison tolerance for floating point negative one lower bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''-1.'' +``` + +### Comparison tolerance for floating point negative one upper bound + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_negative_one_upper_bound.ids +Comparison tolerance for floating point negative one upper bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''-1.'' +``` + +### Comparison tolerance for floating point negative one upper bound + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_negative_one_upper_bound.ids +Comparison tolerance for floating point negative one upper bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''-1.'' +``` + +### Comparison tolerance for floating point negative high number lower bound + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_negative_high_number_lower_bound.ids +Comparison tolerance for floating point negative high number lower bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''-1000000.'' +``` + + +### Comparison tolerance for floating point negative high number lower bound + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_negative_high_number_lower_bound.ids +Comparison tolerance for floating point negative high number lower bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''-1000000.'' +``` + +### Comparison tolerance for floating point negative high number upper bound + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_negative_high_number_upper_bound.ids +Comparison tolerance for floating point negative high number upper bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''-1000000.'' +``` + +### Comparison tolerance for floating point negative high number upper bound + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_negative_high_number_upper_bound.ids +Comparison tolerance for floating point negative high number upper bound +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,''-1000000.'' +``` + +### Comparison tolerance for floating point range greater than zero exclusive + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_range_greater_than_zero_exclusive.ids +Comparison tolerance for floating point range greater than zero exclusive +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,xs:double MinExclusive(''0.'') +``` + +### Comparison tolerance for floating point range greater than zero exclusive + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_range_greater_than_zero_exclusive.ids +Comparison tolerance for floating point range greater than zero exclusive +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,xs:double MinExclusive(''0.'') +``` + +### Comparison tolerance for floating point range greater than zero inclusive + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_range_greater_than_zero_inclusive.ids +Comparison tolerance for floating point range greater than zero inclusive +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,xs:double MinInclusive(''0.'') +``` + +### Comparison tolerance for floating point range greater than zero inclusive + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_range_greater_than_zero_inclusive.ids +Comparison tolerance for floating point range greater than zero inclusive +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,xs:double MinInclusive(''0.'') +``` + +### Comparison tolerance for floating point range lower than zero exclusive + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_range_lower_than_zero_exclusive.ids +Comparison tolerance for floating point range lower than zero exclusive +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,xs:double MaxExclusive(''0.'') +``` + +### Comparison tolerance for floating point range lower than zero exclusive + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_range_lower_than_zero_exclusive.ids +Comparison tolerance for floating point range lower than zero exclusive +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,xs:double MaxExclusive(''0.'') +``` + +### Comparison tolerance for floating point range lower than zero inclusive + +``` ids tolerance/fail_comparison_tolerance_for_floating_point_range_lower_than_zero_inclusive.ids +Comparison tolerance for floating point range lower than zero inclusive +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,xs:double MaxInclusive(''0.'') +``` + +### Comparison tolerance for floating point range lower than zero inclusive + +``` ids tolerance/pass_comparison_tolerance_for_floating_point_range_lower_than_zero_inclusive.ids +Comparison tolerance for floating point range lower than zero inclusive +Entity: ''IFCWALL'' +Requirements: +Property: ''Foo_Bar'',''Foo'',IFCREAL,xs:double MaxInclusive(''0.'') +``` diff --git a/Documentation/testcases/tolerance/fail-comparison_tolerance_for_floating_point_positive_high_number_lower_bound.ids b/Documentation/testcases/tolerance/fail-comparison_tolerance_for_floating_point_positive_high_number_lower_bound.ids new file mode 100644 index 0000000..7821035 --- /dev/null +++ b/Documentation/testcases/tolerance/fail-comparison_tolerance_for_floating_point_positive_high_number_lower_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point positive high number lower bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + 100000. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail-comparison_tolerance_for_floating_point_positive_high_number_lower_bound.ifc b/Documentation/testcases/tolerance/fail-comparison_tolerance_for_floating_point_positive_high_number_lower_bound.ifc new file mode 100644 index 0000000..4e81af3 --- /dev/null +++ b/Documentation/testcases/tolerance/fail-comparison_tolerance_for_floating_point_positive_high_number_lower_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(99999.8999989),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/fail-comparison_tolerance_for_floating_point_positive_high_number_upper_bound.ids b/Documentation/testcases/tolerance/fail-comparison_tolerance_for_floating_point_positive_high_number_upper_bound.ids new file mode 100644 index 0000000..7ee7bbf --- /dev/null +++ b/Documentation/testcases/tolerance/fail-comparison_tolerance_for_floating_point_positive_high_number_upper_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point positive high number upper bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + 100000. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail-comparison_tolerance_for_floating_point_positive_high_number_upper_bound.ifc b/Documentation/testcases/tolerance/fail-comparison_tolerance_for_floating_point_positive_high_number_upper_bound.ifc new file mode 100644 index 0000000..ec53756 --- /dev/null +++ b/Documentation/testcases/tolerance/fail-comparison_tolerance_for_floating_point_positive_high_number_upper_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(100000.1000011),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_high_number_lower_bound.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_high_number_lower_bound.ids new file mode 100644 index 0000000..3b3c0eb --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_high_number_lower_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point negative high number lower bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + -1000000. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_high_number_lower_bound.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_high_number_lower_bound.ifc new file mode 100644 index 0000000..a5022db --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_high_number_lower_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-1000001.00000100001),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_high_number_upper_bound.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_high_number_upper_bound.ids new file mode 100644 index 0000000..e3d9644 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_high_number_upper_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point negative high number upper bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + -1000000. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_high_number_upper_bound.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_high_number_upper_bound.ifc new file mode 100644 index 0000000..0dd2a07 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_high_number_upper_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-999998.9999989),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_low_number_lower_bound.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_low_number_lower_bound.ids new file mode 100644 index 0000000..fd3c7e5 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_low_number_lower_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point negative low number lower bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + -0.0000001 + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_low_number_lower_bound.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_low_number_lower_bound.ifc new file mode 100644 index 0000000..825521c --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_low_number_lower_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-0.00000110000011),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_low_number_upper_bound.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_low_number_upper_bound.ids new file mode 100644 index 0000000..2b3cb63 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_low_number_upper_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point negative low number upper bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + -0.0000001 + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_low_number_upper_bound.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_low_number_upper_bound.ifc new file mode 100644 index 0000000..90bc9e7 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_low_number_upper_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(0.00000090000011),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_one_lower_bound.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_one_lower_bound.ids new file mode 100644 index 0000000..74e7941 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_one_lower_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point negative one lower bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + -1. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_one_lower_bound.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_one_lower_bound.ifc new file mode 100644 index 0000000..7116dcc --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_one_lower_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-1.00000200001),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_one_upper_bound.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_one_upper_bound.ids new file mode 100644 index 0000000..3bebd26 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_one_upper_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point negative one upper bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + -1. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_one_upper_bound.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_one_upper_bound.ifc new file mode 100644 index 0000000..5fd5947 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_negative_one_upper_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-0.9999979),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/property/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_3_4.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_one_lower_bound.ids similarity index 80% rename from Documentation/testcases/property/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_3_4.ids rename to Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_one_lower_bound.ids index 542ad4e..405619f 100644 --- a/Documentation/testcases/property/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_3_4.ids +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_one_lower_bound.ids @@ -1,11 +1,11 @@ - Floating point numbers are compared with a 1e-6 tolerance 3/4 + Comparison tolerance for floating point one lower bound Generated via code automation in the Ids Repository on github. - + @@ -22,7 +22,7 @@ Foo - 42. + 1. diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_one_lower_bound.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_one_lower_bound.ifc new file mode 100644 index 0000000..a39367c --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_one_lower_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(0.9999979),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/property/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_4_4.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_one_upper_bound.ids similarity index 80% rename from Documentation/testcases/property/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_4_4.ids rename to Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_one_upper_bound.ids index 50eae5f..91cae35 100644 --- a/Documentation/testcases/property/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_4_4.ids +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_one_upper_bound.ids @@ -1,11 +1,11 @@ - Floating point numbers are compared with a 1e-6 tolerance 4/4 + Comparison tolerance for floating point one upper bound Generated via code automation in the Ids Repository on github. - + @@ -22,7 +22,7 @@ Foo - 42. + 1. diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_one_upper_bound.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_one_upper_bound.ifc new file mode 100644 index 0000000..88d72b4 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_one_upper_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(1.0000021),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_positive_low_number_lower_bound.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_positive_low_number_lower_bound.ids new file mode 100644 index 0000000..e95beb8 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_positive_low_number_lower_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point positive low number lower bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + 0.0000001 + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_positive_low_number_lower_bound.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_positive_low_number_lower_bound.ifc new file mode 100644 index 0000000..4caa2e0 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_positive_low_number_lower_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-0.00000090000011),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_positive_low_number_upper_bound.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_positive_low_number_upper_bound.ids new file mode 100644 index 0000000..c639b40 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_positive_low_number_upper_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point positive low number upper bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + 0.0000001 + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_positive_low_number_upper_bound.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_positive_low_number_upper_bound.ifc new file mode 100644 index 0000000..3dde171 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_positive_low_number_upper_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(0.00000110000011),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_greater_than_zero_exclusive.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_greater_than_zero_exclusive.ids new file mode 100644 index 0000000..f41fd63 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_greater_than_zero_exclusive.ids @@ -0,0 +1,33 @@ + + + + Comparison tolerance for floating point range greater than zero exclusive + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + + + + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_greater_than_zero_exclusive.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_greater_than_zero_exclusive.ifc new file mode 100644 index 0000000..7e2bfc3 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_greater_than_zero_exclusive.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(0.0000009),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_greater_than_zero_inclusive.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_greater_than_zero_inclusive.ids new file mode 100644 index 0000000..5378d33 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_greater_than_zero_inclusive.ids @@ -0,0 +1,33 @@ + + + + Comparison tolerance for floating point range greater than zero inclusive + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + + + + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_greater_than_zero_inclusive.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_greater_than_zero_inclusive.ifc new file mode 100644 index 0000000..23b3cdf --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_greater_than_zero_inclusive.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-0.0000011),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_lower_than_zero_exclusive.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_lower_than_zero_exclusive.ids new file mode 100644 index 0000000..6a0f908 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_lower_than_zero_exclusive.ids @@ -0,0 +1,33 @@ + + + + Comparison tolerance for floating point range lower than zero exclusive + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + + + + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_lower_than_zero_exclusive.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_lower_than_zero_exclusive.ifc new file mode 100644 index 0000000..a8cec81 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_lower_than_zero_exclusive.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-0.0000009),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_lower_than_zero_inclusive.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_lower_than_zero_inclusive.ids new file mode 100644 index 0000000..f79f680 --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_lower_than_zero_inclusive.ids @@ -0,0 +1,33 @@ + + + + Comparison tolerance for floating point range lower than zero inclusive + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + + + + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_lower_than_zero_inclusive.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_lower_than_zero_inclusive.ifc new file mode 100644 index 0000000..069e37c --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_range_lower_than_zero_inclusive.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(0.0000011),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_zero_lower_bound.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_zero_lower_bound.ids new file mode 100644 index 0000000..2ead5af --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_zero_lower_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point zero lower bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + 0. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_zero_lower_bound.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_zero_lower_bound.ifc new file mode 100644 index 0000000..23b3cdf --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_zero_lower_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-0.0000011),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_zero_upper_bound.ids b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_zero_upper_bound.ids new file mode 100644 index 0000000..375d35a --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_zero_upper_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point zero upper bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + 0. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_zero_upper_bound.ifc b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_zero_upper_bound.ifc new file mode 100644 index 0000000..069e37c --- /dev/null +++ b/Documentation/testcases/tolerance/fail_comparison_tolerance_for_floating_point_zero_upper_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(0.0000011),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass-comparison_tolerance_for_floating_point_positive_high_number_lower_bound.ids b/Documentation/testcases/tolerance/pass-comparison_tolerance_for_floating_point_positive_high_number_lower_bound.ids new file mode 100644 index 0000000..7821035 --- /dev/null +++ b/Documentation/testcases/tolerance/pass-comparison_tolerance_for_floating_point_positive_high_number_lower_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point positive high number lower bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + 100000. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/pass-comparison_tolerance_for_floating_point_positive_high_number_lower_bound.ifc b/Documentation/testcases/tolerance/pass-comparison_tolerance_for_floating_point_positive_high_number_lower_bound.ifc new file mode 100644 index 0000000..f513006 --- /dev/null +++ b/Documentation/testcases/tolerance/pass-comparison_tolerance_for_floating_point_positive_high_number_lower_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(99999.899999),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass-comparison_tolerance_for_floating_point_positive_high_number_upper_bound.ids b/Documentation/testcases/tolerance/pass-comparison_tolerance_for_floating_point_positive_high_number_upper_bound.ids new file mode 100644 index 0000000..7ee7bbf --- /dev/null +++ b/Documentation/testcases/tolerance/pass-comparison_tolerance_for_floating_point_positive_high_number_upper_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point positive high number upper bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + 100000. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/pass-comparison_tolerance_for_floating_point_positive_high_number_upper_bound.ifc b/Documentation/testcases/tolerance/pass-comparison_tolerance_for_floating_point_positive_high_number_upper_bound.ifc new file mode 100644 index 0000000..04a50ef --- /dev/null +++ b/Documentation/testcases/tolerance/pass-comparison_tolerance_for_floating_point_positive_high_number_upper_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(100000.100001),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_high_number_lower_bound.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_high_number_lower_bound.ids new file mode 100644 index 0000000..3b3c0eb --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_high_number_lower_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point negative high number lower bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + -1000000. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_high_number_lower_bound.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_high_number_lower_bound.ifc new file mode 100644 index 0000000..1f618ca --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_high_number_lower_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-1000001.0000010000),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_high_number_upper_bound.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_high_number_upper_bound.ids new file mode 100644 index 0000000..e3d9644 --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_high_number_upper_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point negative high number upper bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + -1000000. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_high_number_upper_bound.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_high_number_upper_bound.ifc new file mode 100644 index 0000000..17be214 --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_high_number_upper_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-999998.999999),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_low_number_lower_bound.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_low_number_lower_bound.ids new file mode 100644 index 0000000..fd3c7e5 --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_low_number_lower_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point negative low number lower bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + -0.0000001 + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_low_number_lower_bound.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_low_number_lower_bound.ifc new file mode 100644 index 0000000..46df30b --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_low_number_lower_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-0.0000011000001),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_low_number_upper_bound.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_low_number_upper_bound.ids new file mode 100644 index 0000000..2b3cb63 --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_low_number_upper_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point negative low number upper bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + -0.0000001 + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_low_number_upper_bound.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_low_number_upper_bound.ifc new file mode 100644 index 0000000..b45a3ff --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_low_number_upper_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(0.0000009000001),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_one_lower_bound.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_one_lower_bound.ids new file mode 100644 index 0000000..74e7941 --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_one_lower_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point negative one lower bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + -1. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_one_lower_bound.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_one_lower_bound.ifc new file mode 100644 index 0000000..2263b2b --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_one_lower_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-1.0000020000),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_one_upper_bound.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_one_upper_bound.ids new file mode 100644 index 0000000..3bebd26 --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_one_upper_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point negative one upper bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + -1. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_one_upper_bound.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_one_upper_bound.ifc new file mode 100644 index 0000000..e4ab477 --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_negative_one_upper_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-0.999998),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/attribute/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_4_4.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_one_lower_bound.ids similarity index 57% rename from Documentation/testcases/attribute/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_4_4.ids rename to Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_one_lower_bound.ids index 8d4ae33..405619f 100644 --- a/Documentation/testcases/attribute/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_4_4.ids +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_one_lower_bound.ids @@ -1,27 +1,30 @@ - Floating point numbers are compared with a 1e-6 tolerance 4/4 + Comparison tolerance for floating point one lower bound Generated via code automation in the Ids Repository on github. - + - IFCSURFACESTYLEREFRACTION + IFCWALL - - - RefractionIndex - + + + Foo_Bar + + + Foo + - 42. + 1. - + diff --git a/Documentation/testcases/property/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_3_4.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_one_lower_bound.ifc similarity index 84% rename from Documentation/testcases/property/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_3_4.ifc rename to Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_one_lower_bound.ifc index 428f701..5034e4e 100644 --- a/Documentation/testcases/property/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_3_4.ifc +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_one_lower_bound.ifc @@ -5,7 +5,7 @@ FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpen FILE_SCHEMA(('IFC4')); ENDSEC; DATA; -#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,$,$,$,$,$,$,#6); +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); #2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); #3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); #4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); @@ -14,6 +14,6 @@ DATA; #7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); #8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); #9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); -#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(42.000084),$); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(0.999998),$); ENDSEC; END-ISO-10303-21; diff --git a/Documentation/testcases/attribute/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_one_upper_bound.ids similarity index 57% rename from Documentation/testcases/attribute/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.ids rename to Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_one_upper_bound.ids index 6cc5801..91cae35 100644 --- a/Documentation/testcases/attribute/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.ids +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_one_upper_bound.ids @@ -1,27 +1,30 @@ - Floating point numbers are compared with a 1e-6 tolerance 2/4 + Comparison tolerance for floating point one upper bound Generated via code automation in the Ids Repository on github. - + - IFCSURFACESTYLEREFRACTION + IFCWALL - - - RefractionIndex - + + + Foo_Bar + + + Foo + - 42. + 1. - + diff --git a/Documentation/testcases/property/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_4_4.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_one_upper_bound.ifc similarity index 84% rename from Documentation/testcases/property/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_4_4.ifc rename to Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_one_upper_bound.ifc index 1c433fe..e91cab3 100644 --- a/Documentation/testcases/property/fail-floating_point_numbers_are_compared_with_a_1e_6_tolerance_4_4.ifc +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_one_upper_bound.ifc @@ -5,7 +5,7 @@ FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpen FILE_SCHEMA(('IFC4')); ENDSEC; DATA; -#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,$,$,$,$,$,$,#6); +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); #2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); #3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); #4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); @@ -14,6 +14,6 @@ DATA; #7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); #8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); #9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); -#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(41.999916),$); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(1.000002),$); ENDSEC; END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_positive_low_number_lower_bound.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_positive_low_number_lower_bound.ids new file mode 100644 index 0000000..e95beb8 --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_positive_low_number_lower_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point positive low number lower bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + 0.0000001 + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_positive_low_number_lower_bound.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_positive_low_number_lower_bound.ifc new file mode 100644 index 0000000..b752f6a --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_positive_low_number_lower_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-0.0000009000001),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_positive_low_number_upper_bound.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_positive_low_number_upper_bound.ids new file mode 100644 index 0000000..c639b40 --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_positive_low_number_upper_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point positive low number upper bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + 0.0000001 + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_positive_low_number_upper_bound.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_positive_low_number_upper_bound.ifc new file mode 100644 index 0000000..64567bc --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_positive_low_number_upper_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(0.0000011000001),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_greater_than_zero_exclusive.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_greater_than_zero_exclusive.ids new file mode 100644 index 0000000..f41fd63 --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_greater_than_zero_exclusive.ids @@ -0,0 +1,33 @@ + + + + Comparison tolerance for floating point range greater than zero exclusive + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + + + + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_greater_than_zero_exclusive.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_greater_than_zero_exclusive.ifc new file mode 100644 index 0000000..c77cf7a --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_greater_than_zero_exclusive.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(0.000001),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_greater_than_zero_inclusive.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_greater_than_zero_inclusive.ids new file mode 100644 index 0000000..5378d33 --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_greater_than_zero_inclusive.ids @@ -0,0 +1,33 @@ + + + + Comparison tolerance for floating point range greater than zero inclusive + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + + + + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_greater_than_zero_inclusive.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_greater_than_zero_inclusive.ifc new file mode 100644 index 0000000..420a4af --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_greater_than_zero_inclusive.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-0.000001),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_lower_than_zero_exclusive.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_lower_than_zero_exclusive.ids new file mode 100644 index 0000000..6a0f908 --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_lower_than_zero_exclusive.ids @@ -0,0 +1,33 @@ + + + + Comparison tolerance for floating point range lower than zero exclusive + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + + + + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_lower_than_zero_exclusive.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_lower_than_zero_exclusive.ifc new file mode 100644 index 0000000..64ac7bc --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_lower_than_zero_exclusive.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-0.000001),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_lower_than_zero_inclusive.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_lower_than_zero_inclusive.ids new file mode 100644 index 0000000..f79f680 --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_lower_than_zero_inclusive.ids @@ -0,0 +1,33 @@ + + + + Comparison tolerance for floating point range lower than zero inclusive + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + + + + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/property/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_lower_than_zero_inclusive.ifc similarity index 84% rename from Documentation/testcases/property/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.ifc rename to Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_lower_than_zero_inclusive.ifc index 34d06b2..2f61cd9 100644 --- a/Documentation/testcases/property/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_1_4.ifc +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_range_lower_than_zero_inclusive.ifc @@ -5,7 +5,7 @@ FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpen FILE_SCHEMA(('IFC4')); ENDSEC; DATA; -#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,$,$,$,$,$,$,#6); +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); #2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); #3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); #4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); @@ -14,6 +14,6 @@ DATA; #7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); #8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); #9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); -#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(42.000042),$); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(0.000001),$); ENDSEC; END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_zero_lower_bound.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_zero_lower_bound.ids new file mode 100644 index 0000000..2ead5af --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_zero_lower_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point zero lower bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + 0. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_zero_lower_bound.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_zero_lower_bound.ifc new file mode 100644 index 0000000..420a4af --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_zero_lower_bound.ifc @@ -0,0 +1,19 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('ViewDefinition [CoordinationView]'),'2;1'); +FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpenShell v0.7.0-dc67287d',''); +FILE_SCHEMA(('IFC4')); +ENDSEC; +DATA; +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); +#2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); +#3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); +#4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); +#5=IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.); +#6=IFCUNITASSIGNMENT((#3,#5,#4,#2)); +#7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); +#8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); +#9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(-0.000001),$); +ENDSEC; +END-ISO-10303-21; diff --git a/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_zero_upper_bound.ids b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_zero_upper_bound.ids new file mode 100644 index 0000000..375d35a --- /dev/null +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_zero_upper_bound.ids @@ -0,0 +1,31 @@ + + + + Comparison tolerance for floating point zero upper bound + Generated via code automation in the Ids Repository on github. + + + + + + + IFCWALL + + + + + + + Foo_Bar + + + Foo + + + 0. + + + + + + \ No newline at end of file diff --git a/Documentation/testcases/property/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.ifc b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_zero_upper_bound.ifc similarity index 84% rename from Documentation/testcases/property/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.ifc rename to Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_zero_upper_bound.ifc index 857aef6..2f61cd9 100644 --- a/Documentation/testcases/property/pass-floating_point_numbers_are_compared_with_a_1e_6_tolerance_2_4.ifc +++ b/Documentation/testcases/tolerance/pass_comparison_tolerance_for_floating_point_zero_upper_bound.ifc @@ -5,7 +5,7 @@ FILE_NAME('','2022-10-07T13:48:43',(),(),'IfcOpenShell v0.7.0-dc67287d','IfcOpen FILE_SCHEMA(('IFC4')); ENDSEC; DATA; -#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,$,$,$,$,$,$,#6); +#1=IFCPROJECT('1hqIFTRjfV6AWq_bMtnZwI',$,'Foo_name',$,$,$,$,$,#6); #2=IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.); #3=IFCSIUNIT(*,.AREAUNIT.,.MILLI.,.SQUARE_METRE.); #4=IFCSIUNIT(*,.VOLUMEUNIT.,.MILLI.,.CUBIC_METRE.); @@ -14,6 +14,6 @@ DATA; #7=IFCWALL('2nJrDaLQfJ1QPhdJR0o97J',$,$,$,$,$,$,$,$); #8=IFCPROPERTYSET('16MocU_IDOF8_x3Iqllz0d',$,'Foo_Bar',$,(#10)); #9=IFCRELDEFINESBYPROPERTIES('1xdwj8qGXK4hzoNbvMdXJW',$,$,$,(#7),#8); -#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(41.999958),$); +#10=IFCPROPERTYSINGLEVALUE('Foo',$,IFCREAL(0.000001),$); ENDSEC; END-ISO-10303-21;