validator-guide

Configure a cheqd node as validator

This document provides guidance on how configure and promote a cheqd node to validator status. Having a validator node is necessary to participate in staking rewards, block creation, and governance.

Preparation steps

Step 1: Ensure you have a cheqd node installed as a service

You must already have a running cheqd-node instance installed using one of the supported methods.

Please also ensure the node is fully caught up with the latest ledger updates.

1. Interactive installer (recommended method)
2. Docker install

Step 2: Generate a new account key

Follow the guidance on using cheqd CLI to manage keys to create a new account key.

cheqd-noded keys add <alias>

When you create a new key, a new account address and mnemonic backup phrase will be printed. Keep the mnemonic phrase safe as this is the only way to restore access to the account if they keyring cannot be recovered.

P.S. in case of using Ledger Nano device it would be helpful to use this instructions

1. Get your node ID

   Follow the guidance on using cheqd CLI to manage nodes to fetch your node ID.

   cheqd-noded tendermint show-node-id

2. Get your validator account address

   The validator account address is generated in Step 1 above when a new key is added. To show the validator account address, follow the cheqd CLI guide on managing accounts.

   cheqd-noded keys list

   (The assumption above is that there is only one account / key that has been added on the node. In case you have multiple addresses, please jot down the preferred account address.)

Promote a node to validator after acquiring CHEQ tokens for staking

1. Ensure your account has a positive balance

   Follow the guidance on using cheqd CLI to manage accounts to check that your account is correctly showing the CHEQ testnet tokens provided to you.

   cheqd-noded query bank balances <address>

2. Get your node's validator public key

   The node validator public key is required as a parameter for the next step. More details on validator public key is mentioned in the cheqd CLI guide on managing nodes.

   cheqd-noded tendermint show-validator

3. Promote your node to validator status by staking your token balance

   You can decide how many tokens you would like to stake from your account balance. For instance, you may want to leave a portion of the balance for paying transaction fees (now and in the future).

   To promote to validation, submit a create-validator transaction to the network:

   cheqd-noded tx staking create-validator --amount <amount-staking> --from <key-name> --chain-id <chain-id> --min-self-delegation <min-self-delegation> --gas auto --gas-adjustment <multiplication-factor> --gas-prices <price-gas> --pubkey <validator-pubkey> --commission-max-change-rate <commission-max-change-rate> --commission-max-rate <commission-max-rate> --commission-rate <commission-rate>

   Parameters required in the transaction above are:

   • amount: Amount of tokens to stake. You should stake at least 1 CHEQ (= 1,000,000,000ncheq) to successfully complete a staking transaction.
   • from: Key alias of the node operator account that makes the initial stake
   • min-self-delegation: Minimum amount of tokens that the node operator promises to keep bonded
   • pubkey: Node's bech32-encoded validator public key from the previous step
   • commission-rate: Validator's commission rate. The minimum is set to 0.05.
   • commission-max-rate: Validator's maximum commission rate, expressed as a number with up to two decimal points. The value for this cannot be changed later.
   • commission-max-change-rate: Maximum rate of change of a validator's commission rate per day, expressed as a number with up to two decimal points. The value for this cannot be changed later.
   • chain-id: Unique identifier for the chain.
     • For cheqd's current mainnet, this is cheqd-mainnet-1
     • For cheqd's current testnet, this is cheqd-testnet-6
   • gas: Maximum gas to use for this specific transaction. Using auto uses Cosmos's auto-calculation mechanism, but can also be specified manually as an integer value.
   • gas-adjustment (optional): If you're using auto gas calculation, this parameter multiplies the auto-calculated amount by the specified factor, e.g., 1.4. This is recommended so that it leaves enough margin of error to add a bit more gas to the transaction and ensure it successfully goes through.
   • gas-prices: Maximum gas price set by the validator. Default value is 50ncheq.

Please note the parameters below are just an “example”.

When setting parameters such as the commission rate, a good benchmark is to consider the commission rates set by validators on existing networks such as Cosmos ATOM chain.

You will see the commission they set, the max rate they set, and the rate of change. Please use this as a guide when thinking of your own commission configurations. This is important to get right, because the commission-max-rate and commission-max-change-rate cannot be changed after they are initially set.

cheqd-noded tx staking create-validator --amount 1000000000ncheq --from key-alias-name --moniker mainnet-validator-name --chain-id cheqd-mainnet-1 --min-self-delegation="1" --gas auto --gas-adjustment 1.4 --gas-prices="50ncheq" --pubkey '{"@type":"/cosmos.crypto.ed25519.PubKey","key":"4anVUO8WhmRMqG1t4z6VxqmqZL3V7q6HqucjwZePiUw="}' --commission-max-change-rate 0.01 --commission-max-rate 0.2 --commission-rate 0.05 --node https://rpc.cheqd.net:443

1. Check that your validator node is bonded

   Checking that the validator is correctly bonded can be checked via any node:

   cheqd-noded query staking validators --node <any-rpc-url>

   Find your node by moniker and make sure that status is BOND_STATUS_BONDED.

2. Check that your validator node is signing blocks and taking part in consensus

   Find out your validator node's hex-encoded address and look for "ValidatorInfo":{"Address":"..."}:

   cheqd-noded tendermint show-address

   Query the latest block. Open <node-address:rpc-port/block in a web browser. Make sure that there is a signature with your validator address in the signature list.

Using Ledger Nano device

To use your Ledger Nano you will need to complete the following steps:

• Set-up your wallet by creating a PIN and passphrase, which must be stored securely to enable recovery if the device is lost or damaged.
• Connect your device to your PC and update the firmware to the latest version using the Ledger Live application.
• Install the Cosmos application using the software manager (Manager > Cosmos > Install).
• Adding a new key In order to use the hardware wallet address with the cli, the user must first add it via cheqd-noded. This process only records the public information about the key.

To import the key first plug in the device and enter the device pin. Once you have unlocked the device navigate to the Cosmos app on the device and open it.

To add the key use the following command:

cheqd-noded keys add <name for the key> --ledger

Note

The --ledger flag tells the command line tool to talk to the ledger device and the --index flag selects which HD index should be used.

When running this command, the Ledger device will prompt you to verify the genereated address. Once you have done this you will get an output in the following form:

$ cheqd-noded keys add test --ledger
- name: test
 type: ledger
 address: cheqd1zx9a7rsrmy5a2hakas0vnfwpadqwp3m327f2yt
 pubkey: ‘{“@type”:“/cosmos.crypto.secp256k1.PubKey”,“key”:“Akm0MdDZpTVltoCpRmmWd/wxiosA9edjPlbNcirs4YO1"}’
 mnemonic: “”

Next steps

On completion of the steps above, you would have successfully bonded a node as validator to the cheqd testnet and participating in staking/consensus.

Learn more about what you can do with your new validator node in the cheqd CLI guide.