Skip to content

Latest commit

 

History

History
40 lines (23 loc) · 1.06 KB

Readme.md

File metadata and controls

40 lines (23 loc) · 1.06 KB
Raw

A Surveillance system which detects motion then sends a mail to the owner of the system

Description

The project is designed as a surveillance system that detects motion using the pir sensor and then send a mail to the registered mail address in the mailer.js file

Technology

The project was developed using:

Project components

Hardware

var Gpio = require("onoff").Gpio;
var LED1 = new Gpio(2, "out");
var LED2 = new Gpio(4, "out");
var LED3 = new Gpio(17, "out");
var pir = new Gpio(27, "in", "both");

  • Raspberry Pi

    • I used Model B+ with Raspbian - any model should be Ok, just be careful with the Gpio configuration pin mappings, they can differ

  • PIR motion sensor

    • It normally connects to Analog Input (ex. on Arduino); however you can use it with Digital as well if you connect a 10K resistor between VCC & Signal

  • Led

    • I used a RGB Led