esr.dtx

% \iffalse meta-comment
%
% Copyright (C) 2007-2010 by Christian Luginbühl
%
% This work may be distributed and/or modified under the conditions
% of the LaTeX Project Public License, either version 1.3 of this
% license or (at your option) any later version.
%
% The latest version of this license is in
%
%   http://www.latex-project.org/lppl.txt
%
% and version 1.3 or later is part of all distributions of LaTeX
% version 2005/12/01 or later.
%
% This work has the LPPL maintenance status `maintained'.
%
% The Current Maintainer of this work is:
%
%   Christian Luginbühl, dinkel@pimprecords.com
%
% This work consists of the files:
%
%   esr.ins, esr.dtx and the derived files esr.sty, esrpos.sty, esr.pdf
%
% \fi
% \iffalse
%<esr|esrpos>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
%<esr>\ProvidesPackage{esr}
%<esr>  [2010/08/02 v0.8.1 Helper package to create 'Einzahlungsschein mit Referenznummer']
%<esrpos>\ProvidesPackage{esrpos}
%<esrpos>  [2010/08/02 v0.8.1 'Einzahlungsschein mit Referenznummer' positioning package]
%
%<*driver>
\documentclass{ltxdoc}
\usepackage{esr}
\EnableCrossrefs
\CodelineIndex
\RecordChanges
\begin{document}
  \DocInput{esr.dtx}
\end{document}
%</driver>
% \fi
%
% \CheckSum{0}
%
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
%
% \changes{v1.0}{2007/04/21}{Initial version}
%
% \GetFileInfo{esr.sty}
%
% \DoNotIndex{\ifhmode,\ifvmode,\ifnum,\iftrue,\ifx,\fi,\fi,\fi,\fi,\fi}
%
% \title{The \textsf{esr} package\thanks{This document
%   corresponds to \textsf{esr}~\fileversion,
%   dated \filedate.}}
% \author{Christian Luginb\"uhl \\ \texttt{dinkel@pimprecords.com}}
%
% \maketitle
%
% \begin{abstract}
%   The |esr| package provides facilities to print on an inpayment slip
%   with reference number in Switzerland -- so called ``Einzahlungsschein mit
%   Referenznummer'' (ESR for short) on sheets with DIN A4 dimensions.
% \end{abstract}
%
% \section{Introduction}
%
% In Switzerland ESR's are the evolution of the normal inpayment slip,
% where account, amount and a reference number are computer readably encoded
% on it which an optical character recognition machine can read. This lowers
% processing times, saves fees from the recipient of the money and also
% identifies the sender with a code set by you.
%
% In order to be able to write on such an inpayment slip, this package was
% designed. It consist of two style files, |esrpos.sty| and |esr.sty|. The
% first deals with placing the values at the correct spots with the correct
% fonts. The latter is more of a high level library that parses the values
% given, calculates the necessary checksums (quite hard to to in \TeX\ ;-)),
% formats them nicely and then propagates them to the print macros of the
% first file.
%
% \section{Disclaimer}
%
% The use of this package is not for everybody! It's about money transfers, and
% (especially Swiss) people and companies do not joke about that. In accordance
% to the copyright notice (\LaTeX\ Project Public License) in the source files
% of this package, I cannot be hold reliable for any damage whatsoever (incl.
% financial ruin) that occurred because of the use of this package.\bigskip
%
% In order to be allowed to print and send ESR's out to your customers, the more
% than a few financial institutes in Switzerland have different rules of
% application. It consists basically of saying that you want to use this option
% in order to get your own personal ESR account number and different other
% information to correctly fill out the different fields on such a inpayment slip.
% Another thing they need from you are a few copies done with the printer that
% will actually be used in the future to print the inpayment slips, so they
% can approve them.\bigskip
%
% And also: This package is not (yet?) a complete round up for all specified
% ways to print these inpayment slips. First of all, currently only ESR and ESR+
% in CHF (Swiss Franks). Payments in EUROs is currently not supported, as well
% as other special uses neither. It forces you to use the empty ESR's to be
% preprinted at the bottom of a DIN A4 sheet. All other formats are not supported
% either. This is due to my own personal use of them, so if you need to have
% another form/currency to be supported I'm willing to implement this.\bigskip
%
% And one last word of warning: This package is considered to be in beta status.
% It might happen, that things change in the API, although I'm pretty happy the
% way it works (since 2004).
%
% \section{Prequisistes}
%
% This package assumes that you have the following two conditions met:
%
% \paragraph{Textpos package}
%
% Most \LaTeX\ installations come with the |textpos| package installed
% by default, otherwise have a look around at CTAN.
%
% \paragraph{Microtype package}
%
% This is used to print the amount into the fields correctly. 
%
% \paragraph{Calc package}
%
% Most \LaTeX\ installations come with the |calc| package installed
% by default, otherwise have a look around at CTAN.
%
% \paragraph{OCR-B font}
%
% I never liked installing fonts in \LaTeX, but the specifications need you
% to write certain parts in this exact font. There are quite a few font
% installation guides lying around in the World Wide Web, that make your life
% at least a little bit easier.
%
% There is however a package called |ocr| providing for the required font.
%
% \section{Usage}
%
% As you will see further down, the macro names quite often consist of a mixture
% of German and English. The reason for this is, that there are no ESR's in
% English language. Instead of trying to invent English names for the
% different fields (which might have lead to imprecise terms and even more
% confusion), I decided to just use the German ones.
%
% \subsection{esrpos.sty}
%
% It is possible and sometimes maybe desired to use only the |esrpos.sty| file
% so all of the printing macros are publicly available (a.k.a. no @ symbol in
% their names).
%
% These commands print the respective field at the correct position. The
% names of those commands are all prefixed with 'esrpos' (to avoid name
% clashes), followed with camel-case German names the match the names used
% on the preprinted ESR forms.
%
% The official specifications of this inpayment slip can be found at\medskip
%
% \small\textsl{https://www.postfinance.ch/de/cust/download/bizdoc.html}\normalsize\medskip
%
% where you find a handbook ``ESR Oranger Einzahlungsschein in CHF und EURO''
% in four different languages (German, French, Italian and English).\medskip
%
% Whatever macro has the additional \ldots|Beleg|\ldots in its name, goes to the
% small detachable part of the ESR that after paying, acts as your receipt. If
% nothing else is stated the two corresponding macros should take the exact same
% string.\bigskip
%
% \DescribeMacro{\esrposEinzahlungFuer}
% \DescribeMacro{\esrposBelegEinzahlungFuer}
% These two macros expect two arguments, which is the string that is printed at
% the preset location and the string below (|\esrposZugunstenVon| or |\esrpostBelegZugunstenVon|)
% Depending if your account is from a bank or ``Die Post'',
% there goes either the Name and Address of your bank (in two lines, like
% |Valiant Bank\\3001 Bern|) otherwise your name and address. The exact string
% has to be asked from your financial institute.
% If your Account is from ``Die Post'', which means |\esrposZugunstenVon| and
% |\esrpostBelegZugunstenVon| are empty, the space for this string is enlarged.
%
% \DescribeMacro{\esrposZugunstenVon}
% \DescribeMacro{\esrposBelegZugunstenVon}
% These two macros expect one argument, which is the string that is printed at
% the preset location. If your account is from ``Die Post'' this field is empty,
% otherwise there you have to print your name and address, the same as it is
% set on your bank account. Again: Detailed information about this field you
% will get from your financial institute.
%
% \DescribeMacro{\esrposKonto}
% \DescribeMacro{\esrposBelegKonto}
% These two macros expect one argument, which is the string that is printed at
% the preset location. Your financial institute will give you the information
% about the account number.
%
% \DescribeMacro{\esrposBetrag}
% \DescribeMacro{\esrposBelegBetrag}
% These two macros expect two arguments forming the amount that to be paid to
% you. It's split in Franken and Rappen (which is the Swiss currency). Beware
% that the Rappen in Switzerland are rounded to 5, and the specifications of the
% ESR won't allow anything else.
%
% \DescribeMacro{\esrposEinbezahltVon}
% \DescribeMacro{\esrposBelegEinbezahltVon}
% These two macros expect one argument with the name and address of your customer.
% It is common to prefix this address on the Beleg with the reference number. One call
% could look like\medskip
%
% |\esrposBelegEinbezahltVon{123441240\medskip\\Max Powers ...}|,\medskip
%
% while the other would look like\medskip
%
% |\esrposEinbezahltVon{Max Powers ...}|,\medskip
%
% \DescribeMacro{\esrposReferenznummer}
% This macro takes one argument takes one argument, which is (what a coincidence)
% the reference number. The exact specifications about forming such a reference
% number are partially found in the ``Handbuch'' given above and from your financial
% institute. Also a checksum is contained in this reference, so this field in not
% considered to be a free-form text field and so has to be carefully generated.
% It is a common practice to print a space after each five digits beginning from the
% right, like\medskip
%
% |\esrposReferenznummer{10 00000 23002}|\medskip
%
% Although not required I decided to print this number in OCR-B font. The preprinted
% field exactly fits the maximum 27 digits in this font -- and it just looks better.
%
% \DescribeMacro{\esrposKodierzeile}
% This field takes one argument, all the machine readable information formed to
% to the transaction. It is very strict on its format and therefore needs to be
% generated carefully. Here also check the ``Handbook'' above and discuss everything
% with your financial institute. This field will be printed in OCR-B font as
% specified.
%
% \subsection{esr.sty}
%
% So far so good. We now know the |esrpos| macros and learned that they are pretty
% dumb, although very exact in placing text. The main component of the |esr| package
% is the |esr.sty| file, which is a much more high level approach to printing an ESR.
% Therefore you probably never use the macros in the |esrpos| file directly but only
% work with macros defined in this file.\bigskip
%
% \DescribeMacro{\esrEinzahlungFuer}
% It takes one argument and its contents need to fulfil the same conditions as its
% conterparts in |esrpos|. Like all of the next few macros it bascially stores the
% contents of its parameter and is printed only after |\esrPrint| is called. It is
% obligatory to set it in order to get a valid ESR.
%
% \DescribeMacro{\esrZugunstenVon}
% It takes one argument and its contents need to fulfil the same conditions as its
% counterparts in |esrpos|. If omitted |esr| thinks that you are writing a VESR (which
% is an ESR for an account on ``Die Post'').
%
% \DescribeMacro{\esrKonto}
% It takes one argument that has to be of the form |XX-YYY-Z|, where |YYY| can be up to
% 6 digits. It is obligatory to set it in order to get a valid ESR.
%
% \DescribeMacro{\esrBetrag}
% It takes one argument that has to be of the form |XXX.YY|. At the moment it is
% crucial to have the Rappen part written with two digits, so short amounts like |22.5|
% or simply |45| are not supported at the moment and lead to a incorrect ESR. It is
% although possible to leave this field unset. It this case |esr| will print an
% ESR+ where the customer can fill in any amount upon payment. But beware that in this
% case you have to print on a ESR sheet that has boxed fields for every digit.
%
% \DescribeMacro{\esrEinbezahltVon}
% It also takes one argument being the name and address of your customer. The hint about
% the common practice with also giving the reverence number as described at the
% corresponding macro in |esrpos| does not apply here, because this is done automatically
% in |esr|. It is obligatory to set this filed in order to get a valid ESR.
%
% \DescribeMacro{\esrPrefix}
% If you are printing BESR's (being ESR's for bank accounts) you most probably get from
% your preferred financial institute a number that will form the beginning of the reference
% number. If your account is from a bank, then this field is obligatory, if your account
% if from ``Die Post'' than you can leave it empty.
%
% \DescribeMacro{\esrReferenznummer}
% Another obligatory field. It can consist of up to 26$-$[length of |\esrPrefix|] digits.
% You can encode anything you want in this reference number like order number, customer
% number, and so on. The checksum is automatically calculated.
%
% \DescribeMacro{\esrPrint}
% This is the workhorse and has no parameters. Its purpose is to print the entire ESR
% by calling the different functions seen in the |esrpos.sty| file. It also parses the
% entries made above, calls the checksum calculation macros and calls pretty-printers
% for nicely printing everything.
%
% This is the only macro that has to be called within |\begin{document}| and |\end{document}|.
% Depending on the page it is written, it prints the ESR. It does not interfere with the
% normal text flow, so its probably a good idea to launch it either right at the beginning
% or at the end of a document.
%
% \DescribeMacro{\esrposPrinterCalibrate}
% Since it is important to print certain fields on right position, the calibration of the printer
% is very important. Postfinance has tools to check the correct position of the "Referenznummer".
% As you never have these tools available when you need them, this function helps you calibrate youre
% printer. To use, include |\esrposPrinterCalibrate| in your invoice. 
% You can now check the correct printing of the fields by checking the following items:
% \begin{enumerate}
% \item The arrowhead pointing to the right page margin must fit the side edge.
% \item The arrowhead pointing to the bottom of the page must fit the side edge.
% \item The rulers printed on both arows must fit a 1mm scale otherwise the scale of the page is
%    not correct
% \end{enumerate}
% To correct the position of the printout look at your printers handbook. For postscript printers
% you can adjust the PPD file acordingly. A usefull tool could be alingnmargins found at\medskip
% \small\textsl{ http://www.openprinting.org/download/printing/alignmargins}\normalsize\medskip
%
% 
% Just to make it clear to everybody: At the end, youre responsible for printing according to the rules 
% of postfinance. This macro is just a assistance to calibrate the printer.
%
% \subsubsection{esr.cfg}
%
% When running |(pdf)latex| on your document, |esr| tries to read a file named |esr.cfg| where
% you can put default values for the different macros described above. Some of them like
% EinzahlungFuer, ZugunstenVon, Konto and probably Prefix do not change very often. So it's
% useful to create such a |esr.cfg| file and put it either globally somewhere in your \LaTeX-Tree
% or next to the file you are going to render.
% The config file is not parsed in any way different from a normal |\input| so the file simply
% looks something like:\medskip
%
% |\esrEinzahlungFuer{Your Bank\\3000 Banktown}|
%
% |\esrZugunstenVon{Your Name\\Yourstreet 1\\4000 Yourtown}|
%
% |\esrKonto{01-234567-8}|
%
% |\esrPrefix{901234}|\medskip
%
% \section{Example}
%
% Noe see how easy it is to print an ESR with this package. I'm assuming that an |esr.cfg| file
% like the one described just before is lying around somewhere \LaTeX\ finds it. Here is a
% complete file printing an ESR:\medskip
%
% |\documentclass{article}|
%
% |\usepackage{esr}|
%
% |\begin{document}|
%
% |  \esrEinbezahltVon{Max Powers\\Stromstr. 47\\1234 Volt}|
%
% |  \esrBetrag{142.00}|
%
% |  \esrReferenznummer{1235711131719}|
%
% |  \esrPrint|
%
% |\end{document}|
%
% \StopEventually{\PrintIndex}
%
% \section{Implementation}
%
% This section is too split in two parts, First we discuss the implementation of |esrpos|,
% the the one of |esr|.
%
% \subsection{esrpos.sty}
%
% \iffalse
%<*esrpos>
% \fi
%
% First off, we include the |textpos| package, that allows us to place boxes anywhere
% on the page and writing into them.
% Second, include the |calc| package to calculate lengths in text positioning.
% Third is the ocr package that includes OCR Fonts requested by the specification.
%
%    \begin{macrocode}
\RequirePackage[absolute]{textpos}
\RequirePackage{ocr}
\RequirePackage{calc}
\RequirePackage{microtype}
%    \end{macrocode}
%
% Then we set the origin positioning to the top left corner of the payment slip, which (no
% surprises) is at (0mm, |\paperheight - 4.0 in| )  
% -- so one might say this declaration is redundant. This is partially
% true, although this give me the chance to explain you, that if your printer constantly has
% a little offset in one direction, it is possible to update this value somewhere in your
% document. It is also entered here to show that it might be easy to update the |esrpos| style
% file to work with other formats of ESR's.
%
% Beware that if you use the |textpos| package somewhere else in your document, make sure that
% you reset the |\textblockorigin| to this value before using one of the printing macros.
%
%    \begin{macrocode}
\textblockorigin{0mm}{\paperheight - 4.0 in}
%    \end{macrocode}
%
% \begin{macro}{\esrposV@origParIndent}
% \begin{macro}{\esrposV@origParSkip}
% Initialize two internal variables that hold the documents original indent and skip.
%
%    \begin{macrocode}
\newlength{\esrposV@origParIndent}
\newlength{\esrposV@origParSkip}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\esrposM@prePrint}
% Saves current values and sets indent and skip the way they are used in ESR
% writing.
%
%    \begin{macrocode}
\newcommand{\esrposM@prePrint} {
  \setlength{\esrposV@origParIndent}{\parindent}
  \setlength{\esrposV@origParSkip}{\parskip}
  \setlength{\parindent}{0mm}
  \setlength{\parskip}{0mm}
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrposM@postPrint}
% Restores the original values after printing.
%
%    \begin{macrocode}
\newcommand{\esrposM@postPrint} {
  \setlength{\parskip}{\esrposV@origParSkip}
  \setlength{\parindent}{\esrposV@origParIndent}
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrposPrinterCalibrate}
% This macro prints the two arrows to calibrate youre printer.
% To print the picture environement is used.
%
%    \begin{macrocode}
\newcommand{\esrposPrinterCalibrate} {
  \esrposM@prePrint
  \setlength{\unitlength}{1mm}
  \begin{textblock*}{ 70mm }[0,0](\paperwidth - 70mm , 4in - 70mm )
  \noindent
      \linethickness{0.1mm}
  \parbox[l][ 70mm][t]{70mm}{
  \noindent
    \begin{picture}(70,0)(2,70)
      \put(45,0){ \line(0,1){65}}
      \put(45,0){ \line(1,1){12}}
      \put(45,0){ \line(-1,1){12}}
      \multiput(44,10)(0,10){6}{ \line(1,0){2}}
      \multiput(43,15)(0,10){6}{ \line(1,0){4}}
      \multiput(44.5,11)(0,1){54}{ \line(1,0){1}}

      \put(70,25){ \line(-1,0){65}}
      \put(70,25){ \line(-1,-1){12}}
      \put(70,25){ \line(-1,1){12}}
      \multiput(60,24)(-10,0){6}{ \line(0,1){2}}
      \multiput(55,23)(-10,0){6}{ \line(0,1){4}}
      \multiput(59,24.5)(-1,0){54}{ \line(0,1){1}}
    \end{picture}
   }
  \end{textblock*}
  \esrposM@postPrint
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrposM@formatNormal}
% Sets font and size for fields in the ESR that use a ``normal'' font. Note: I could
% have left it font alone and only changed the size to fit the fields, however I
% think it look badly to use a serif font in the ESR, so I decided to use the Adobe
% Helvetica font, that is (hopefully) installed in every \LaTeX\ distribution. In case
% you still want to use your documents font, you can simply delete the |\usefont| command
% or |\renewcommand| this macro.
%
%    \begin{macrocode}
\newcommand{\esrposM@formatNormal}[1] {
  \esrposM@prePrint
  \usefont{OT1}{phv}{m}{n}\fontsize{9pt}{12pt}\selectfont
  #1%
  \esrposM@postPrint
}
%    \end{macrocode}
% \end {macro}
%
% \begin{macro}{\esrposM@formatOCRB}
% Sets font and size for fields in the ESR that use the OCR-B font. I chose to not
% only print the `Kodierzeile' in OCR-B (which is the only one, that according to
% the specifications must be in this font), but also the `Referenzzeile'.
% It has aestethical reasons. Again, if you are unhappy, you
% are free to change the macro call in |\esrposKodierzeile|.
%
%    \begin{macrocode}
\newcommand{\esrposM@formatOCRB}[1] {
  \esrposM@prePrint
  \fontsize{10pt}{12pt}\ocrfamily{#1}%
  \esrposM@postPrint
}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\esrposM@formatBelegReferenznummer}
% Sets font and size for reference number printed on the "Beleg".
% It is common to print the number in small letters above the name of the person who pays.
% Format is small OCR Font. So it fits on one line.
%
%    \begin{macrocode}
\newcommand{\esrposM@formatBelegReferenznummer}[1] {
  \esrposM@prePrint
  \fontsize{6pt}{12pt}\ocrfamily{\textls*[1]{#1}}%
  \esrposM@postPrint
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrposM@formatBetrag}
% Sets font and size for value fields (Betrag) amount in the ESR. 
% This is in OCRB, same definition as |\esrposM@formatOCRB| per default.
%
%    \begin{macrocode}
\newcommand{\esrposM@formatBetrag}[1] {
  \esrposM@prePrint
  \fontsize{10pt}{12pt}\ocrfamily{\textls*[500]{#1}}%
  \esrposM@postPrint
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrEinzahlungFuer}
% \begin{macro}{\esrBelegEinzahlungFuer}
% \begin{macro}{\esrZugunstenVon}
% \begin{macro}{\esrBelegZugunstenVon}
% \begin{macro}{\esrKonto}
% \begin{macro}{\esrBelegKonto}
% \begin{macro}{\esrBetrag}
% \begin{macro}{\esrBelegBetrag}
% \begin{macro}{\esrEinbezahltVon}
% \begin{macro}{\esrBelegEinbezahltVon}
% \begin{macro}{\esrReferenznummer}
% \begin{macro}{\esrBelegReferenznummer}
% \begin{macro}{\esrKodierzeile}
% All of the remaining commands print the respective text (given in its parameter(s))
% at the correct position. In section ??? I already discussed what parameters are
% allowed and where you can find the official documentation.
%
%    \begin{macrocode}
\newcommand{\esrposEinzahlungFuer}[2] {
  \begin{textblock*}{2.1in}(2.6 in, 1in /6 )
    \setbox0=\hbox{#2\unskip}\ifdim\wd0=0pt
      \esrposM@formatNormal{\parbox[r][7in /6][c]{\linewidth}{#1}}
    \else
      \esrposM@formatNormal{\parbox[r][2in /6][c]{\linewidth}{#1}}
    \fi
  \end{textblock*}
}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand{\esrposBelegEinzahlungFuer}[2] {
  \begin{textblock*}{2.1in}(.2 in, 1in /6 )
  \setbox0=\hbox{#2\unskip}\ifdim\wd0=0pt
      \esrposM@formatNormal{\parbox[r][7in /6][c]{\linewidth}{#1}}
    \else
      \esrposM@formatNormal{\parbox[r][2in /6][c]{\linewidth}{#1}}
    \fi
  \end{textblock*}
}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand{\esrposZugunstenVon}[1] {
  \setbox0=\hbox{#1\unskip}\ifdim\wd0=0pt
    \relax
  \else
    \begin{textblock*}{2.1in}(2.6 in, 4in /6)
      \esrposM@formatNormal{\parbox[r][4.8in /6][c]{\linewidth}{#1}}
    \end{textblock*}
  \fi
}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand{\esrposBelegZugunstenVon}[1] {
  \setbox0=\hbox{#1\unskip}\ifdim\wd0=0pt
    \relax
  \else
    \begin{textblock*}{2.1in}(.2 in, 4in /6)
      \esrposM@formatNormal{\parbox[r][4.8in /6][c]{\linewidth}{#1}}
    \end{textblock*}
  \fi
}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand{\esrposKonto}[1] {
  \begin{textblock*}{1.2 in}[0,1](3.5in, 10in /6)
    \esrposM@formatNormal{\parbox[t][1in /6][c]{\linewidth}{\centerline#1}}
  \end{textblock*}
}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand{\esrposBelegKonto}[1] {
  \begin{textblock*}{1.2 in}[0,1](1.1in, 10in /6 )
    \esrposM@formatNormal{\parbox[t][1in /6][c]{\linewidth}{\centerline#1}}
  \end{textblock*}
}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand{\esrposBetrag}[2] {
  \begin{textblock*}{40mm}(2.5in, 11in /6 )
    \esrposM@formatBetrag{\parbox[t][.2in][c]{\linewidth}{\hfill#1}}
  \end{textblock*}
  \begin{textblock*}{9mm}(4.33in+3mm, 11in /6)
    \esrposM@formatBetrag{\parbox[t][.2in][c]{\linewidth}{#2}}
  \end{textblock*}
}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand{\esrposBelegBetrag}[2] {
  \begin{textblock*}{40mm}(.1in, 11in /6)
    \esrposM@formatBetrag{\parbox[t][.2in][c]{\linewidth}{\hfill#1}}
  \end{textblock*}
  \begin{textblock*}{9mm}( 1.90in+3mm, 11in /6)
    \esrposM@formatBetrag{\parbox[t][.2in][c]{\linewidth}{#2}}
  \end{textblock*}
}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand{\esrposEinbezahltVon}[1] {
  \begin{textblock*}{3.3in}[0,1](4.9in, 16in /6)
    \esrposM@formatNormal{\parbox[t][5in/6 ][t]{\linewidth}{#1}}
  \end{textblock*}
}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand{\esrposBelegEinbezahltVon}[1] {
  \begin{textblock*}{2.1in}[0,1](.2in, 19in /6)
    \esrposM@formatNormal{\parbox[t][5in/6 ][t]{\linewidth}{#1}}
  \end{textblock*}
}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand{\esrposReferenznummer}[1] {
  \begin{textblock*}{3.3in}[0,1](4.88in, 3.5cm)
    \esrposM@formatOCRB{\parbox[c][.3in ][b]{\linewidth}{#1}}
  \end{textblock*}
}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand{\esrposBelegReferenznummer}[1] {
  \begin{textblock*}{2.1in}[0,1](.2in, 13.9in /6)
    \esrposM@formatBelegReferenznummer{\parbox[t][1in /6 ][t]{\linewidth}{\hfill#1}}
  \end{textblock*}
}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand{\esrposKodierzeile}[1] {
  \begin{textblock*}{5.5in}[1,1](8in, 20in /6)
    \esrposM@formatOCRB{\parbox[t][1 in /6 ][c]{\linewidth}{\hfill#1}}
  \end{textblock*}
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \iffalse
%</esrpos>
% \fi
%
% \subsection{esr.sty}
%
% \iffalse
%<*esr>
% \fi
%
% No surprises, that we require the |esrpos| package.
%
%    \begin{macrocode}
\RequirePackage{esrpos}
%    \end{macrocode}
%
% We start by initializing a few counters that need to be set in a global context.
%
% \begin{macro}{\esrC@spacer}
% If set to |-1| no spacers will be printed when calling the macros |\esrM@zeros| or
% |\esrM@rawPrint|. If its set to |0| to start, this counter actually counts up every
% character printed, and |\esrM@addSpacerIfNeeded| will print a space at the correct
% positions. This is used to pretty print the ``Referenznummer''.
%
%    \begin{macrocode}
\newcount\esrC@spacer
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrC@rawCount}
% This counter will hold the number of raw (aka numberic) characters while doing a
% |\esrM@rawCount|.
%
%    \begin{macrocode}
\newcount\esrC@rawCount
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrC@carry}
% This counter holds the carry value in checksum generation. Because the |\esrM@checksumRec|
% can be called multiple times with different parts of a to-be-calculated number string, this
% counter needs to be set in a global context.
%
%    \begin{macrocode}
\newcount\esrC@carry
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrC@checksum}
% This one holds the final checksum after|\esrM@finalizeChecksum| is called.
%
%    \begin{macrocode}
\newcount\esrC@checksum
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrC@zeroCountBetrag}
% \begin{macro}{\esrC@zeroCountRef...}
% \begin{macro}{\esrC@zeroCountKonto}
% These three counters hold the number of |0| that need to be filled to generate a correct
% ``Kodierzeile'' and ``Referenznummer''. The values are set in the respective |\esrM@parse...|
% macro.
%
%    \begin{macrocode}
\newcount\esrC@zeroCountBetrag
\newcount\esrC@zeroCountReferenznummer
\newcount\esrC@zeroCountKonto
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\esrV@betragPrefix}
% This prefix indicates that the ESR has an open ``Betrag'' field so the amount can be inserted
% by the recipient, if this is not overwritten by |\esrBetrag|. The value |04| is the code in the
% Kodierzeile that represents the customer-fillable amount field.
%
%    \begin{macrocode}
\def\esrV@betragPrefix{04}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrV@betrag}
% \begin{macro}{\esrV@betragFranken}
% \begin{macro}{\esrV@betragRappen}
% Sets empty amount ``variables'' that you don't necessarily need to give for generating an ESR.
%
%    \begin{macrocode}
\def\esrV@betrag{}
\def\esrV@betragFranken{}
\def\esrV@betragRappen{}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\esrV@zugunstenVon}
% \begin{macro}{\esrV@prefix}
% In case you are writing a VESR (ESR with an account from ``Die Post''), the two ``variables''
% might be empty. They are set here, if you don't set them either, such a VESR is assumed.
%
%    \begin{macrocode}
\def\esrV@zugunstenVon{}
\def\esrV@prefix{}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\esrM@parseBetrag}
% Parses the Betrag and calculates the checksum and 0-fill number.
%
%    \begin{macrocode}
\def\esrM@parseBetrag{
%    \end{macrocode}
% The next line resets the |\esrC@carry| counter for starting a new checksum calculation.
%    \begin{macrocode}
  \esrC@carry=0
%    \end{macrocode}
% Here we launch the checksum calculation -- something you will see quite a few times in
% this source code. This time it calculates it for the |\esrV@betragPrefix|.
%    \begin{macrocode}
  \expandafter\esrM@checksumRec\esrV@betragPrefix\relax
%    \end{macrocode}
% The following line if a Betrag has actually been set. The |\esrV@betragPrefix| with value
% |01| means the an amount in CHF (Swiss Franks) is set.
%    \begin{macrocode}
  \ifnum\esrV@betragPrefix=1
%    \end{macrocode}
% The char counter is defined and set to the specified number of digits this field in the
% Kodierzeile can hold.
%    \begin{macrocode}
    \newcount\esrC@charCount
    \esrC@charCount=10
%    \end{macrocode}
% Calling the counter macro and subtract the number from the count set above. Done two times
% with |\esrV@betragFranken| and |\esrV@betragRappen|.
%    \begin{macrocode}
    \esrM@rawCount{\esrV@betragFranken}
    \advance\esrC@charCount -\esrC@rawCount
    \esrM@rawCount{\esrV@betragRappen}
    \advance\esrC@charCount -\esrC@rawCount
%    \end{macrocode}
% Here we set the counter that hold the number of zeros that need to be filled.
%    \begin{macrocode}
    \esrC@zeroCountBetrag=\esrC@charCount
%    \end{macrocode}
% This loops as many times as zeros would be filled and then updates the checksum by calling
% the macro with a |0|.
%    \begin{macrocode}
    \loop
      \ifnum \esrC@charCount > 0
      \esrM@checksumRec0\relax
      \advance\esrC@charCount -1
    \repeat
%    \end{macrocode}
% Checksum calculation goes on with |\esrV@betragFranken| and |\esrV@betragRappen|.
%    \begin{macrocode}
    \expandafter\esrM@checksumRec\esrV@betragFranken\relax
    \expandafter\esrM@checksumRec\esrV@betragRappen\relax
  \fi
%    \end{macrocode}
% The following macro needs to be called to make the last few calculations for the
% checksum. The final result is stored in the counter |\esrC@checksum|.
%    \begin{macrocode}
  \esrM@finalizeChecksum
%    \end{macrocode}
% Here we save the string representation of the checksum. The |\expandafter| frenzy is needed
% so that the checksum number will not change anymore.
%    \begin{macrocode}
  \expandafter\def\expandafter\esrV@checksumBetrag\expandafter{\number\esrC@checksum}
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@parseReferenznummer}
% This macro does basically the same as the last one, but this time with the Referenznummer. So
% refer to the comments made above, as this time it will be much less documented.
%
%    \begin{macrocode}
\def\esrM@parseReferenznummer{
  \newcount\esrC@charCount
  \esrC@charCount=26
  \esrC@carry=0
%    \end{macrocode}
% Be aware that |\esrV@prefix| can be empty if you are creating a VESR.
%    \begin{macrocode}
  \esrM@rawCount{\esrV@prefix}
  \advance\esrC@charCount -\esrC@rawCount
  \esrM@rawCount{\esrV@referenznummer}
  \advance\esrC@charCount -\esrC@rawCount
  \esrC@zeroCountReferenznummer=\esrC@charCount
  \expandafter\esrM@checksumRec\esrV@prefix\relax
  \loop
    \ifnum \esrC@charCount > 0
    \esrM@checksumRec0\relax
    \advance\esrC@charCount -1
  \repeat
  \expandafter\esrM@checksumRec\esrV@referenznummer\relax
  \esrM@finalizeChecksum
  \expandafter\def\expandafter\esrV@checksumReferenznummer\expandafter{\number\esrC@checksum}
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@parseKonto}
% Parses the Konto and calculates the 0-fill number. You do not need to calculate a checksum,
% because it is already included in the account number (the last digit).
%
%    \begin{macrocode}
\def\esrM@parseKonto{
%    \end{macrocode}
% We use directly the final counter that holds the number of zeros, because we don't need
% to |\loop| through anything like above.
%    \begin{macrocode}
  \esrC@zeroCountKonto=9
  \esrM@rawCount{\esrV@konto}
  \advance\esrC@zeroCountKonto -\esrC@rawCount
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@renderKodierzeile}
% Renders the Kodierzeile by calling methods that render parts of it.
%
%    \begin{macrocode}
\def\esrM@renderKodierzeile{%
%    \end{macrocode}
% We don't want any spacers (for pretty printing) in Kodierzeile, so we set it to |-1|. Cf.
% the explanations at the definition of the counter |\esrC@spacer| above.
%    \begin{macrocode}
  \esrC@spacer=-1\relax%
  \esrM@renderBetragInKodierzeile>%
  \esrM@renderReferenznummerInKodierzeile+ %
  \esrM@renderKontoInKodierzeile>%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@renderBetragInKo...}
% Renders the Betrag for showing up in the Kodierzeile
%
%    \begin{macrocode}
\def\esrM@renderBetragInKodierzeile{%
  \esrV@betragPrefix%
%    \end{macrocode}
% We only print the filling zeros ant the Betrag if it has actually been set.
%    \begin{macrocode}
  \ifnum\esrV@betragPrefix=1%
%    \end{macrocode}
% This macro call prints as many |0| as the parameter says.
%    \begin{macrocode}
    \esrM@zeros{\esrC@zeroCountBetrag}%
%    \end{macrocode}
% Calling the |\esrM@rawPrint| makes sure only digits are printed and no other symbols
% like `|-|' or `|.|'.
%    \begin{macrocode}
    \esrM@rawPrint{\esrV@betrag}%
  \fi
  \esrV@checksumBetrag%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@renderReferenznum...}
% Renders the Referenznummer for showing up in the Kodierzeile, like the above
% macro did.
%
%    \begin{macrocode}
\def\esrM@renderReferenznummerInKodierzeile{%
  \esrV@prefix%
  \esrM@zeros{\esrC@zeroCountReferenznummer}%
  \esrM@rawPrint{\esrV@referenznummer}%
  \esrV@checksumReferenznummer%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@renderKontoInKod...}
% Simply a redirection of the parameter to a helper macro, that expects the split parts
% of the Konto.
%
%    \begin{macrocode}
\def\esrM@renderKontoInKodierzeile{%
  \expandafter\esrM@rawRenderKonto\esrV@konto\relax%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@rawRenderKonto}
% Helps rendering the Konto for showing up in the Kodierzeile. It expects the separating
% `|-|' to be set and gets the splits. Because in the Kodierzeile, the Konto has a fixed
% length, we have to prepend the middle part of the Konto with the fill-up zeros.
%
%    \begin{macrocode}
\def\esrM@rawRenderKonto#1-#2-#3{%
  #1%
  \esrM@zeros{\esrC@zeroCountKonto}%
  #2#3%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@renderReferenznummer}
% Renders the Referenznummer, we set |\esrC@spacer| to |0| this time to start the pretty
% printer function. Cf. |\esrM@rawPrint| and |\esrM@zeros| below to see how it works.
%
%    \begin{macrocode}
\def\esrM@renderReferenznummer{%
%    \end{macrocode}
% We set the |\esrC@spacer| to |0| to enable pretty printing. This counter also acts as
% counter for how many characters are printed yet.
%    \begin{macrocode}
  \esrC@spacer=0\relax%
  \esrM@rawPrint{\esrV@prefix}%
  \esrM@zeros{\esrC@zeroCountReferenznummer}%
  \esrM@rawPrint{\esrV@referenznummer}%
  \esrV@checksumReferenznummer%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@rawCount}
% Macro that does the resetting of the counter and makes sure the parameter is completely
% expanded, before calling its recursive counterpart that does the actual raw character counting.
%
%    \begin{macrocode}
\def\esrM@rawCount#1{%
  \esrC@rawCount=0%
%    \end{macrocode}
% The parameter is expanded and followed by a |\relax| that acts as the last character in the
% parameter.
%    \begin{macrocode}
  \expandafter\esrM@rawCountRec#1\relax%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@rawCountRec}
% Counts all raw digit characters (well ... it just removes the `|-|' and `|.|' as they appear
% in Konto and Betrag. The result is held by |\esrC@rawCount|.
%
%    \begin{macrocode}
\def\esrM@rawCountRec#1{%
%    \end{macrocode}
% When seeing |\relax| this is the exit condition for the recursion.
%    \begin{macrocode}
  \ifx#1\relax%
    \let\next=\relax%
  \else%
    \ifx#1.%
    \else%
      \ifx#1-%
      \else%
%    \end{macrocode}
% Here we update the counter whenever the conditions are met. These are as seen in the lines
% before, that it is no dot nor minus.
%    \begin{macrocode}
        \advance\esrC@rawCount 1%
      \fi%
    \fi%
%    \end{macrocode}
% Here we recursively call ourselves and the next character in the parameter is read.
%    \begin{macrocode}
    \let\next=\esrM@rawCountRec%
  \fi%
  \next%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@rawPrint}
% Works basically the same as |\esrM@rawCount| by expanding the parameter and appending a |\relax|
% before calling the recursion macro.
%
%    \begin{macrocode}
\def\esrM@rawPrint#1{%
  \expandafter\esrM@rawPrintRec#1\relax%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@rawCountRec}
% Prints out all raw digit characters (well ... it just removes the `|-|' and `|.|' as they appear
% in Konto and Betrag.
%
%    \begin{macrocode}
\def\esrM@rawPrintRec#1{%
  \ifx#1\relax%
    \let\next=\relax%
  \else%
    \ifx#1.%
    \else%
      \ifx#1-%
      \else%
%    \end{macrocode}
% Here we print the character.
%    \begin{macrocode}
        #1%
%    \end{macrocode}
% If case |\esrC@spacer| is greater than |-1| (meaning that the pretty printing is on, we call
% the macro that checks if at this very position it should insert a space character.
%    \begin{macrocode}
        \ifnum\esrC@spacer>-1\esrM@addSpacerIfNeeded\fi%
      \fi%
    \fi%
    \let\next=\esrM@rawPrintRec%
  \fi%
  \next%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@zeros}
% Writes as many zeros as given in the parameter.
%
%    \begin{macrocode}
\def\esrM@zeros#1{%
  \newcount\esrC@zeros%
  \esrC@zeros=#1%
  \loop
    \ifnum \esrC@zeros > 0
    \advance\esrC@zeros -1
    0%
%    \end{macrocode}
% Also here, if the pretty printer is desired it calls the macro.
%    \begin{macrocode}
    \ifnum\esrC@spacer>-1\esrM@addSpacerIfNeeded\fi%
  \repeat%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@addSpacerIfNeeded}
% Looks if the rendering is at a position where a spacer is desired
% and prints one in these cases.
%
%    \begin{macrocode}
\def\esrM@addSpacerIfNeeded{%
%    \end{macrocode}
% Here we update the character counter.
%    \begin{macrocode}
  \advance\esrC@spacer 1\relax%
%    \end{macrocode}
% These few |\ifnum|s check if we are at such a character count, where we should
% print a space.
%    \begin{macrocode}
  \ifnum \esrC@spacer = 2%
    \ %
  \fi%
  \ifnum \esrC@spacer = 7%
    \ %
  \fi%
  \ifnum \esrC@spacer = 12%
    \ %
  \fi%
  \ifnum \esrC@spacer = 17%
    \ %
  \fi%
  \ifnum \esrC@spacer = 22%
    \ %
  \fi%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@checksumRec}
% Recursively calculates the checksum (Mod 10, rec.) the intermediate result
% is stored in |\esrC@carry| so consecutive calls to this function with different
% parts of the number string is possible. After all parts are calculated macro
% |\esrV@finalizeChecksum| has to be called. I wont discuss the algorithm,
% as it is discussed in detail it the specifications indicated below.
%
% The official specifications of checksum calculation can be found at\medskip
%
% \small\textsl{https://www.postfinance.ch/de/cust/download/bizdoc.html}\normalsize\medskip
%
% where you find a handbook 'E-Finance Recordstrukturen' in four different
% languages (German, French, Italian and English).
%
%    \begin{macrocode}
\def\esrM@checksumRec#1{%
  \ifx#1\relax%
    \let\next=\relax%
  \else%
%    \end{macrocode}
% Here also we only want digits to count with.
%    \begin{macrocode}
    \ifx#1.%
    \else%
      \ifx#1-%
      \else%
        \advance\esrC@carry #1\relax%
        \ifnum\esrC@carry > 9%
          \advance\esrC@carry -10\relax%
        \fi%
        \ifcase\esrC@carry%
          \esrC@carry=0%
        \or%
          \esrC@carry=9%
        \or%
          \esrC@carry=4%
        \or%
          \esrC@carry=6%
        \or%
          \esrC@carry=8%
        \or%
          \esrC@carry=2%
        \or%
          \esrC@carry=7%
        \or%
          \esrC@carry=1%
        \or%
          \esrC@carry=3%
        \or%
          \esrC@carry=5%
        \fi\relax%
      \fi%
    \fi%
    \let\next=\esrM@checksumRec%
  \fi%
  \next%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@finalizeChecksum}
% Calculates and saves the checksum in counter |\esrC@checksum|. This macro
% has to be called after one or more calls to |\esrM@checksumRec| without
% any parameter.
%
%    \begin{macrocode}
\def\esrM@finalizeChecksum{%
  \esrC@checksum=10
  \advance\esrC@checksum -\esrC@carry
  \ifnum \esrC@checksum = 10
    \esrC@checksum=0
  \fi
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrM@@saveBetragSplits}
% Saves Franken and Rappen separately, by having a special parameter
% requirement that splits them. The parameter it accepts ends with an
% exclamation mark, otherwise only one character would be in |#2|. Cf.
% its calling macro |\esrBetrag|/
%
%    \begin{macrocode}
\def\esrM@saveBetragSplits#1.#2!{
  \def\esrV@betragFranken{#1}
  \def\esrV@betragRappen{#2}
}
%    \end{macrocode}
% \end{macro}
%
% We finally get to the public macros, most of which need to be set before
% calling |\esrPrint|. I will indicate if one of these calls is optional.
%
% \begin{macro}{\esrEinzahlungFuer}
% This is a required macro to be set. The parameter should be a two line
% string if writing a BESR (from a bank account) or your name and address
% in multiple lines if writing a VESR (from ``Die Post''). Like most of
% the following macros, it simply sets a ``variable'' that will be used
% as a parameter for a printing macro in |esrpos|.
%
%    \begin{macrocode}
\def\esrEinzahlungFuer#1{
  \def\esrV@einzahlungFuer{#1}
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrZugunstenVon}
% This is an optional macro if you are writing a VESR. Otherwise there
% should go name and address as it is indicated on your bank account.
%
%    \begin{macrocode}
\def\esrZugunstenVon#1{
  \def\esrV@zugunstenVon{#1}
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrKonto}
% This macro is needed to be set. You get the number from your financial
% institute and it should look like `|XX-YYYY-ZZ|' (with up to 6 |Y| digits.
%
%    \begin{macrocode}
\def\esrKonto#1{
  \def\esrV@konto{#1}
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrPrefix}
% This macro is only required is you are writing a BESR. This number you get
% from your bank and is (in most cases) 6 digits long. Do not put any spaces
% in the parameter.
%
%    \begin{macrocode}
\def\esrPrefix#1{
  \def\esrV@prefix{#1}
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrEinbezahltVon}
% Here goes name and address of your customer. The argument is obligatory.
%
%    \begin{macrocode}
\def\esrEinbezahltVon#1{
  \def\esrV@einbezahltVon{#1}
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrBetrag}
% This optional argument being set has one parameter being the amount your
% customer has to pay you. It has the format |XXX.YY| and it is crucial to not
% shortcut that amount by omitting zeros at the end. It needs to have the dot
% and two digits after it. In case it is not set at all, an ESR with a customer-fillable
% field is generated.
%
%    \begin{macrocode}
\def\esrBetrag#1{
%    \end{macrocode}
% The |\esrV@betragPrefix| is set to `|01|' which is the code for having a ESR
% with a fixed amount field in CHF (Swiss Franks).
%    \begin{macrocode}
  \def\esrV@betragPrefix{01}
  \def\esrV@betrag{#1}
%    \end{macrocode}
% To split up the Betrag in Franken and Rappen this helper macro call is done. The
% `|!|' at the end of the parameter is there to make both digits after the decimal
% point being part of the |\esrM@saveBetragSplits|'s second parameter.
%    \begin{macrocode}
  \esrM@saveBetragSplits#1!
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\esrReferenznummer}
% The reference number can be set with as many as 26 digits minus the length of
% |\esrPrefix|. You are free to encode whatever you like in there. But double
% check with your financial institute about the time span that has to pass until
% the same number is allowed to occur. Setting this macro is obligatory.
%
%    \begin{macrocode}
\def\esrReferenznummer#1{
  \def\esrV@referenznummer{#1}
}
%    \end{macrocode}
% \end{macro}
%
% It is also possible to have default values stored in a file named |esr.cfg| that
% is found by \LaTeX\ upon processing. This means that this optional file can either
% be but in the directory tree of your \LaTeX-distribution and then |texhash|ed (or
% something similar) or next to the file that is processed.
%
%    \begin{macrocode}
\InputIfFileExists{esr.cfg}{
  \message{Configuration file 'esr.cfg' loaded.}
}{
  \message{No configuration file 'esr.cfg' found.}
}
%    \end{macrocode}
%
% \begin{macro}{\esrPrint}
%
%    \begin{macrocode}
\def\esrPrint{
%    \end{macrocode}
% When you are going to print your ESR, this macro first launches the
% different input parsers as described above.
%    \begin{macrocode}
  \esrM@parseReferenznummer
  \esrM@parseBetrag
  \esrM@parseKonto
%    \end{macrocode}
% Currently the only precaution to not have text in the area of your
% inpayment slip is turning of your footers. It is up to you to set
% the margins of your printable area so that it does not interfere
% with the ESR.
%    \begin{macrocode}
  \thispagestyle{empty}
  \esrposBelegEinzahlungFuer{\esrV@einzahlungFuer}{\esrV@zugunstenVon}
  \esrposBelegZugunstenVon{\esrV@zugunstenVon}
  \esrposBelegKonto{\esrV@konto}
  \esrposBelegBetrag{\esrV@betragFranken}{\esrV@betragRappen}
  \esrposEinzahlungFuer{\esrV@einzahlungFuer}{\esrV@zugunstenVon}
  \esrposZugunstenVon{\esrV@zugunstenVon}
  \esrposKonto{\esrV@konto}
  \esrposBetrag{\esrV@betragFranken}{\esrV@betragRappen}
  \esrposBelegEinbezahltVon{\esrV@einbezahltVon}
  \esrposBelegReferenznummer{\esrM@renderReferenznummer}
  \esrposEinbezahltVon{\esrV@einbezahltVon}
  \esrposReferenznummer{\esrM@renderReferenznummer}
  \esrposKodierzeile{\esrM@renderKodierzeile}
}
%    \end{macrocode}
% \end{macro}
%
% \iffalse
%</esr>
% \fi
%
% \Finale
\endinput