protocol.txt

W_RX - receive from STM32
W_TX - transfer to SMT32

get_down:

down none
down set_buzzer "on"
down set_buzzer "off"
down set_child_lock "on"
down set_child_lock "off"
down set_power "on"
down set_power "off"
down set_mode "auto" | "high" | "medium" | "silent" | ("strong" - invalid)
down set_dry "on"
down set_dry "off"
down set_led_b "2" (off)
down set_led_b "1" (on, dim)
down set_led_b "0" (on, bright)
down set_limit_hum 80 (min: 30, max: 80)
down MIIO_net_change uap
down MIIO_net_change unprov
down MIIO_net_change local


props:

props power "off" mode "silent" depth 25 buzzer "off" dry "on" child_lock "off" temp_dec 217 humidity 53 -> ok
props mode "auto" -> ok
props mode "silent" -> ok
props mode "medium" -> ok
props mode "high" -> ok
props power "on" button_pressed "power" depth 24 -> ok
props power "off" button_pressed "power" -> ok
props humidity DD -> ok
props buzzer "off" -> ok
props child_lock "on" -> ok
props child_lock "off" -> ok
props button_pressed "led" -> ok
props use_time 834220 -> ok
props temp_dec DDD -> ok
props button_pressed "led" -> ok



events:

event speed_change "sR_1" "sR_2" "temp_221" "humidity_53" "depth_23" -> ok
event speed_change "sR_2" "sR_3" "temp_225" "humidity_52" "depth_21" -> ok
event speed_change "sR_3" "sR_4" "temp_228" "humidity_51" "depth_21" -> ok
event speed_change "sR_4" "sR_1" "temp_228" "humidity_51" "depth_21" -> ok
status_report "temp_242" "humidity_52" "depth_43" "led_0" "buzzer_on" "power_off" "childLock_off" "useTime_ 43049"
water_shortage
water_box_off


model zhimi.humidifier.ca1 -> ok
ble_config set 895 1029 -> ok
mcu_version 1029 -> ok
net -> uap
net -> unprov (after 1 hour of being uap wifi turns off)
net -> local
time -> yyyy-mm-dd hh:mm:ss (local time)
restore -> ok
reboot -> ok

result "ok" -> ok




errors:

error "device_poweroff" -6011 -> ok

down set_mode "strong"
error "invalid arg" -5001 (end up in Error: {'code': -5001, 'message': 'invalid arg'} from api)