Skip to content

Latest commit

 

History

History
69 lines (41 loc) · 1.86 KB

README.md

File metadata and controls

69 lines (41 loc) · 1.86 KB
Raw

rpi-matrix-acn-e1-31

Controlling of 32x32 or 16x32 RGB LED displays using Raspberry Pi rpi-rgb-led-matrix with sACN E1.31

sACN E1.31 is a protocol for controlling lights over a network. Jinx controls LEDs on one or more sACN E1.31 nodes. An sACN E1.31 node drives the LEDs. In this example, Jinx runs on a laptop and controls a Pi with a rpi-rgb-led-matrix RGB LED displays using Raspberry Pi. The Pi is the sACN E1.31 node. A RGB LED displays 32x32 / 32x16 / 64x64 or higher and an add-on board connected for a Raspberry Pi+/3

E1.31 is not full implemement jet.

Preliminary

RGB LED displays rpi-rgb-led-matrix Program for Raspberry Pi must be installed and working on the Pi supplied Python software. Make sure this works before graduating to sACN E1.31.

https://github.com/hzeller/rpi-rgb-led-matrix

There is also a Art-Net implementation on https://github.com/darknessii/rpi-matrix-acn-e1-31

Install libraries on the Pi

Do this only once to install the Python twisted libraries.

sudo apt-get install python-twisted

Run sACN E1.31 server rpi-matrix-acn-e1-31 on the Pi

The following command runs the sACN E1.31 server turning the Pi into an sACN E1.31 node. Many programs can send LED values to an sACN E1.31 node. Glediator and Jinx is such a program.

sudo python rpi-matrix-acn-e1-31.py

NOT working

  • Multicast Support

TO DO

  • a lot... give some input

Jinx!

Jinx! – LED Matrix Control

Jinx!, is a free available software for controlling LED matrices.

Glediator

See the Glediator download page to download and install Glediator.

xLights

xLights is a free and open source program that enables you to design, create and play amazing lighting displays through the use of DMX controllers, E1.31 Ethernet controllers and more.