diff --git a/README.md b/README.md index b7fd8ca..f992029 100644 --- a/README.md +++ b/README.md @@ -1,9 +1,9 @@ -# SubGHz Bruteforcer Application for Flipper Zero +# SubGHz BruteForcer Application for Flipper Zero  -SubGhz Bruteforcer from [Unleashed Firmware](https://github.com/DarkFlippers/unleashed-firmware) +SubGhz BruteForcer from [Unleashed Firmware](https://github.com/DarkFlippers/unleashed-firmware) ## Disclaimer @@ -21,8 +21,8 @@ You can also download the [release](https://github.com/derskythe/flipperzero-sub <br /> > [!WARNING] > -> The application is not compatible with the official firmware version. -> Also, it has not been tested on other firmware versions other than [Unleashed Firmware](https://github.com/DarkFlippers/unleashed-firmware) and [OFW](https://github.com/flipperdevices/flipperzero-firmware). +> The application has not been tested on other firmware versions other than [Unleashed Firmware](https://github.com/DarkFlippers/unleashed-firmware) +> and [OFW](https://github.com/flipperdevices/flipperzero-firmware). --- @@ -33,12 +33,12 @@ You can also download the [release](https://github.com/derskythe/flipperzero-sub  <p>Here you can select the protocol and frequency that will be used for bruteforce.</p> -<p>According to our observations, `CAME 12bit 433MHz` is the most common protocol, so it is selected by default. -To identify other devices and protocols, you should inspect the device.</p> -<p>According to the protocol, when probe a key, each value is sent 3 times.</p> -<p>Most of the devices this works but there are devices that don't work and more repetitions are needed.</p> +<p>According to our observations, <code>CAME 12bit 433MHz</code> is the most common protocol, so it is selected by default.</p> +<p></p>To identify other devices and protocols you should inspect the device.</p> +<p>According to the protocol, when probe a key, each value is sent 3 times. +For most of the devices this works but there are devices that don't work and more repetitions are needed.</p> <p>The number of repetitions can be increased with the right button, the left button decreases the value.</p> -<p>The negative side of increasing the number of repetitions will be a longer key find time.</p> +<p>But negative side of increasing the number of repetitions will be a longer key find time.</p>  @@ -114,7 +114,7 @@ To identify other devices and protocols, you should inspect the device.</p> > [!NOTE] > -> Only dip switch combinations, not full 25bit bruteforce +> Only DIP switch combinations, not full 25bit bruteforce - UNILARM 25bit 330MHz (TE: 209μs) - UNILARM 25bit 433MHz (TE: 209μs) @@ -123,7 +123,7 @@ To identify other devices and protocols, you should inspect the device.</p> > [!NOTE] > -> Only dip switch combinations, not full 25bit bruteforce +> Only DIP switch combinations, not full 25bit bruteforce - SMC5326 25bit 330MHz (TE: 320μs) - SMC5326 25bit 433MHz (TE: 320μs) @@ -132,7 +132,7 @@ To identify other devices and protocols, you should inspect the device.</p> > [!NOTE] > -> Only for 8 dip switch remote, not full 24bit bruteforce +> Only for 8 DIP switch remote, not full 24bit bruteforce - PT2260 24bit 315MHz (TE: 286μs) - PT2260 24bit 330MHz (TE: 286μs)