LCD35_fbcp

sudo apt-get install xserver-xorg-input-evdev

sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf

sudo apt-get install cmake -y

sudo git clone https://github.com/tasanakorn/rpi-fbcp

cd rpi-fbcp/
sudo mkdir build
cd build/
sudo cmake ..
sudo make
sudo install fbcp /usr/local/bin/fbcp

cd ../..
sudo cp -f ./etc/rc.local /etc/rc.local

if test "$1" = "0" -o "$#" = "0";then
sudo cp -rf ./usr/35_spi_128M_99-calibration-0.conf /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp -f ./boot/35_spi_128M_0.dtbo /boot/overlays/kedei.dtbo
sudo  cp ./boot/35_config_128M_fbcp.txt   /boot/config.txt
echo "LCD displayer 0"
elif test "$1" = "90";then
sudo cp -rf ./usr/35_spi_128M_99-calibration-90.conf /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp -f ./boot/35_spi_128M_90.dtbo /boot/overlays/kedei.dtbo
sudo  cp ./boot/35_config_128M_fbcp_90.txt   /boot/config.txt
echo "LCD displayer 90"
elif test "$1" = "180";then
sudo cp -rf ./usr/35_spi_128M_99-calibration-180.conf /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp -f ./boot/35_spi_128M_180.dtbo /boot/overlays/kedei.dtbo
sudo  cp ./boot/35_config_128M_fbcp_180.txt   /boot/config.txt
echo "LCD displayer 180"
elif test "$1" = "270"; then
sudo cp -rf ./usr/35_spi_128M_99-calibration-270.conf /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp -f ./boot/35_spi_128M_270.dtbo /boot/overlays/kedei.dtbo
sudo  cp ./boot/35_config_128M_fbcp270.txt   /boot/config.txt
echo "LCD displayer 270"
fi

sudo apt-mark hold raspberrypi-bootloader
sudo reboot