Skip to content

Latest commit

 

History

History
43 lines (39 loc) · 2.81 KB

README.md

File metadata and controls

43 lines (39 loc) · 2.81 KB
Raw


SourceCode watchface for Tizen

This is a simple watchface for Tizen operating system (tested on Samsung Galaxy Watch Active 2 with Tizen 5.5.0.2). Watchface is styled as C# source code with Visual Studio default color scheme. It displays current time, date, battery level and steps count.

Preview



Installation

Because GalaxyWatchStudio is no longer supported by Samsung, installation is a bit tricky. Very helpful is this forum post.

Installation steps:

  1. On watch enable debugging mode and connect to same Wi-Fi network as your PC. Debugging mode can be enabled in Settings -> About watch -> Debugging .
  2. Reboot your watch (this is important step).
  3. Open Galaxy Watch Studio and file from this repository vscoding.gwd.
  4. Connect to your watch by entering its IP address.
  5. Open Tizen Studio and using Tools -> Package Manager -> Extension SDK install extensions: Samsung Certificate Extension and Samsung Wearable Extension.
  6. After installation go back to Tizen Studio and in Tools -> Device Manager -> Remote Device Manager (right second icon) add your watch (connection On).
  7. In Tizen Studio go to Tools -> Certificate Manager -> + and create new certificate profile. Type of certificate is Samsung.
  8. Close Tizen Studio and GalaxyWatchStudio and go to C:\Users\{your_user}\SamsungCertificate\{name_of_certificate_profile} and copy content of this folder to these (and content in these folder delete before):
    • C:\Program Files\Galaxy Watch Studio\tizen\keystore
    • C:\Users\{your_user}\GearWatchDesigner\keystore
    • C:\Fit2Installer\cert
  9. Open GalaxyWatchStudio and vscode.gwd file from this repository.
  10. Press F10 to build watchface and enter your certificate password.
  11. It will display error message after building, but watchface should be built in file vscoding_TW5.tpk (same folder where is vscode.gwd).
  12. Using Fit2Installer install vscoding_TW5.tpk on your watch:
    • copy vscoding_TW5.tpk to sign_me folder in Fit2Installer
    • run connect.bat (type your watch IP address and press Enter, it will probably display error message, but when you will run it again it should be already connected)
    • run sign.bat (type your certificate password and press Enter)
    • run install.bat
    • run disconnect.bat
  13. Watchface should be installed on your watch. In Settings -> Apps -> Permissions allow all permissions for this watchface.
  14. Change watchface to SourceCode by holding on current watchface and swiping left/right.