Merge pull request #1 from dreamster/v2.0

V2.0

Author: tulku

examples/distance_keeper/distance_keeper.pde

@@ -0,0 +1,36 @@
+/**
+ * A robot that mantains a distance from a frontal obstacle.
+ * Author: Ernesto Corbellini
+ */
+
+#include <dreamster.h>
+
+Dreamster robot;
+
+int distA;
+int distB;
+int distC;
+
+int outA;
+int outB;
+int outC;
+
+void setup() {
+  robot.setup();
+}
+
+void loop() {
+  robot.scan(distA, distB, distC);
+
+  // If too close, go backwards
+  if(distA < 100) {
+    robot.move(-20, -20);
+  }
+
+  // If we are far enough then stop
+  if(distA > 150) {
+    robot.move(0, 0);
+  }
+
+  robot.update();
+}

examples/obstacle_avoidance.ino

@@ -1,7 +1,7 @@
 name=Dreamster
-version=1.0
+version=2.0
 author=Lucas Chiesa <lucas.chiesa@gmail.com>
-maintainer=Lucas Chiesa <lucas.chiesa@gmail.com>
+maintainer=Ernesto Corbellini <ecorbe@gmail.com>
 sentence=A library that makes using your Dreamster a breeze.
 paragraph=This library supports all the basic functions of the Dreamster robot
 category=Robotics

library.properties

@@ -0,0 +1,110 @@
+/*
+  Servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
+  Copyright (c) 2009 Michael Margolis.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+/* 
+  A servo is activated by creating an instance of the Servo class passing 
+  the desired pin to the attach() method.
+  The servos are pulsed in the background using the value most recently 
+  written using the write() method.
+
+  Note that analogWrite of PWM on pins associated with the timer are 
+  disabled when the first servo is attached.
+  Timers are seized as needed in groups of 12 servos - 24 servos use two 
+  timers, 48 servos will use four.
+  The sequence used to sieze timers is defined in timers.h
+
+  The methods are:
+
+    Servo - Class for manipulating servo motors connected to Arduino pins.
+
+    attach(pin )  - Attaches a servo motor to an i/o pin.
+    attach(pin, min, max  ) - Attaches to a pin setting min and max values in microseconds
+    default min is 544, max is 2400  
+ 
+    write()     - Sets the servo angle in degrees.  (invalid angle that is valid as pulse in microseconds is treated as microseconds)
+    writeMicroseconds() - Sets the servo pulse width in microseconds 
+    read()      - Gets the last written servo pulse width as an angle between 0 and 180. 
+    readMicroseconds()   - Gets the last written servo pulse width in microseconds. (was read_us() in first release)
+    attached()  - Returns true if there is a servo attached. 
+    detach()    - Stops an attached servos from pulsing its i/o pin. 
+ */
+
+#ifndef Servo_h
+#define Servo_h
+
+#include <inttypes.h>
+
+/* 
+ * Defines for 16 bit timers used with  Servo library 
+ *
+ * If _useTimerX is defined then TimerX is a 16 bit timer on the current board
+ * timer16_Sequence_t enumerates the sequence that the timers should be allocated
+ * _Nbr_16timers indicates how many 16 bit timers are available.
+ */
+
+// Architecture specific include
+#if defined(ARDUINO_ARCH_AVR)
+#include "avr/ServoTimers.h"
+#elif defined(ARDUINO_ARCH_SAM)
+#include "sam/ServoTimers.h"
+#else
+#error "This library only supports boards with an AVR or SAM processor."
+#endif
+
+#define Servo_VERSION           2     // software version of this library
+
+#define MIN_PULSE_WIDTH       544     // the shortest pulse sent to a servo  
+#define MAX_PULSE_WIDTH      2400     // the longest pulse sent to a servo 
+#define DEFAULT_PULSE_WIDTH  1500     // default pulse width when servo is attached
+#define REFRESH_INTERVAL    20000     // minumim time to refresh servos in microseconds 
+
+#define SERVOS_PER_TIMER       12     // the maximum number of servos controlled by one timer 
+#define MAX_SERVOS   (_Nbr_16timers  * SERVOS_PER_TIMER)
+
+#define INVALID_SERVO         255     // flag indicating an invalid servo index
+
+typedef struct  {
+  uint8_t nbr        :6 ;             // a pin number from 0 to 63
+  uint8_t isActive   :1 ;             // true if this channel is enabled, pin not pulsed if false 
+} ServoPin_t   ;  
+
+typedef struct {
+  ServoPin_t Pin;
+  volatile unsigned int ticks;
+} servo_t;
+
+class Servo
+{
+public:
+  Servo();
+  uint8_t attach(int pin);           // attach the given pin to the next free channel, sets pinMode, returns channel number or 0 if failure
+  uint8_t attach(int pin, int min, int max); // as above but also sets min and max values for writes. 
+  void detach();
+  void write(int value);             // if value is < 200 its treated as an angle, otherwise as pulse width in microseconds 
+  void writeMicroseconds(int value); // Write pulse width in microseconds 
+  int read();                        // returns current pulse width as an angle between 0 and 180 degrees
+  int readMicroseconds();            // returns current pulse width in microseconds for this servo (was read_us() in first release)
+  bool attached();                   // return true if this servo is attached, otherwise false 
+private:
+   uint8_t servoIndex;               // index into the channel data for this servo
+   int8_t min;                       // minimum is this value times 4 added to MIN_PULSE_WIDTH    
+   int8_t max;                       // maximum is this value times 4 added to MAX_PULSE_WIDTH   
+};
+
+#endif