ZigBee Devices

This page provides an overview per manufacturer of the ZigBee Devices connected to my Hue bridge, as reported by deCONZ. It lists the endpoints and clusters per device. Server clusters are in boldface.

I joined my RaspBee to the ZigBee network created by my Hue bridge and, after that, these devices where discovered automatically by deCONZ.

TODO:

Try an make the RaspBee join a ZigBee network created by an Osram Lightify gateway.
Double check that the Lightify Gateway has FC0F and 0B04 client clusters for Device Setup and Electrical Measurement.
Try and make the RaspBee join a ZigBee network created by an innr gateway.

Philips

Hue Bridge

Here's the configuration for a second-generation Hue bridge:

Endpoint	Profile	Cluster	Name
F2	ZGP		0061 unknown
	0021	ZigBee Green Power Proxy
40	ZLL		Control Bridge
	1000	ZLL Commissioning
	0019	OTAU
	1000	ZLL Commissioning
	0004	Groups
	0005	Scenes
	0000	Basic
	0300	Color Control
	0008	Level Control
	0006	On/Off
41	ZHA		Combined Interface
	000F	Binary Input (Basic)
	0406	Occupancy Sensing
	0402	Temperature Measurement
	0405	Humidify Measurement
	FC00	? Device Setup
	0400	Illuminance Measurement

Notes:

So the Hue bridge does talk ZHA?!
I suspect the Binary Input (Basic) is used for the buttonevent of the Hue dimmer switch.
Apparently Philips planned for a ZigBee version of the CLIPHumidity sensor? But no ZigBee version of the CLIPOpenClose sensor?
The Hue dimmer switch has a corresponding server for the FC00 cluster. Could it be for keeping track which lights are connected to the dimmer switch using touchlink? When connecting a previously standalone dimmer switch to a Hue bridge (using the Hue app), the bridge can "inherit" the lights from the dimmer switch.

Hue Lights

Here's the configuration for a Hue Extended Color Light:

Endpoint	Profile	Cluster	Name
02	ZLL		Extended Color Light
	0000	Basic
	0003	Identify
	0004	Groups
	0005	Scenes
	0006	On/Off
	0008	Level Control
	0300	Color Control
	1000	ZLL Commissioning
	0019	OTAU
F2	ZGP		0061 unknown
	0021	ZigBee Green Power Sink
	0021	ZigBee Green Power Proxy

Notes:

A Hue Color Light and a Hue Color Temperature Lights have the same configuration. So does a Hue Dimmable Light, except that, of course, it misses the Color Control cluster.

Hue Motion Sensor

Here's the configuration for a Hue motion sensor:

Endpoint	Profile	Cluster	Name
02	ZHA		Occupancy Sensor
	0000	Basic
	0001	Power Configuration
	0003	Identify
	0406	Occupancy Sensing
	0400	Illuminance Measurement
	0402	Temperature Measurement
	0019	OTAU
01	ZLL		On/Off Sensor
	0000	Basic
	0000	Basic
	0003	Identify
	0004	Groups
	0006	On/Off
	0008	Level Control
	0300	Color Control
	0005	Scenes

Notes:

So the Hue motion sensor does talk ZHA?!
The 01 endpoint seems to suggest it could work standalone, without a Hue bridge, like the Hue dimmer switch?!

Hue Dimmer Switch

Here's the configuration for a Hue dimmer switch:

Endpoint	Profile	Cluster	Name
01	ZLL		Non-Color-Scene Controller
	0000	Basic
	0000	Basic
	0003	Identify
	0004	Groups
	0006	On/Off
	0008	Level Control
	0005	Scenes
02	ZHA		000C
	0000	Basic
	0001	Power Configuration
	0003	Identify
	000F	Binary Input (Basic)
	FC00	? Device Setup
	0019	OTAU

Notes:

So the Hue dimmer switch does talk ZHA?!
deCONZ seems to have troubles communicating with the dimmer switches. Of my six dimmer switches, only two are reporting in the web interface; two show grey, but trying to read attributes through Cluster Info does nothing; two show red and don't even list the discovered endpoints and clusters.
The Scenes cluster is missing from one of my dimmers, which reports as a Non-Color Controler device. Not sure if this is due to a deCONZ communication error or different firmware?
I suspect the Binary Input (Basic) is used for buttonevent.
The Hue bridge has a corresponding client for the FC00 cluster.

Hue tap

The Hue tap doesn't show in the deCONZ gui.

Osram

Lightify Light

Here's the configuration for an Osram E14 bulb:

Endpoint	Profile	Cluster	Name
03	ZLL		Color Temperature Light
	1000	ZLL Commissioning
	0000	Basic
	0003	Identify
	0004	Groups
	0005	Scenes
	0006	On/Off
	0008	Level Control
	0300	Color Control
	FC0F	? Device Setup
	0019	OTAU

Notes:

No support for ZGP proxy.
I suspect OSRAM use the FC0F cluster for setting the power-on default.

Lightify Plug

Here's the configuration for an Osram plug:

Endpoint	Profile	Cluster	Name
03	ZLL		On/Off Plug-In Unit
	1000	ZLL Commissioning
	0000	Basic
	0003	Identify
	0004	Groups
	0005	Scenes
	0006	On/Off
	0B04	? Electrical Measurement
	0019	OTAU

Notes:

I don't remember seeing some Electrical Measurement features in the OSRAM Lightly app.

innr

innr Bulbs

Here's the configuration for an innr RB 162 dimmable light:

Endpoint	Profile	Cluster	Name
01	ZLL		Dimmable Light
	0000	Basic
	0004	Groups
	0003	Identify
	0006	On/Off
	0008	Level Control
	0005	Scenes
02	ZLL		1000 unknown
	1000	ZLL Commissioning

Notes:

Indeed, no over-the-air update for the firmware as innr support had indicated.
deCONZ seems to have problems communicating with these lights. They show red after a while in the deCONZ gui. When trying to send a command (from cluster info), deCONZ reports sending failed.

innr Control Board

Here's the configuration for an innr PL 110 or UC 110, which use the same control box:

Endpoint	Profile	Cluster	Name
01	ZLL		Dimmable Light
	0000	Basic
	0004	Groups
	0003	Identify
	0006	On/Off
	0008	Level Control
	0005	Scenes
	FFFF	?
	0019	OTAU
	0000	Basic
	0004	Groups
	0003	Identify
	0006	On/Off
	0008	Level Control
	0005	Scenes
	0019	OTAU

Huh, support for over-the-air update for the firmware?
Huh, no ZLL Commissioning? Maybe that's why these aren't listed under certified devices on the ZigBee alliance website?
I've no clue about the FFFF cluster.
The box seems to be configurable as a ZigBee control device as well. It does contain an unused header. Maybe innr uses the same board for their gateway?
deCONZ seems to have problems communicating with these control boards. They show red after a while in the deCONZ gui. When trying to send a command (from cluster info), deCONZ reports sending failed.

Home | FAQ | Getting Started | Reference