Skip to content

Latest commit

 

History

History
19 lines (16 loc) · 633 Bytes

README.md

File metadata and controls

19 lines (16 loc) · 633 Bytes

kasa-pressure

Control your Kasa smart lights with a Raspberry Pi

Materials

  • Raspberry Pi
  • Breadboard
  • 330ohm resistor
  • Push button
  • 3 Jumper wires
  • Kasa light bulbs

Setup

  1. Prepare the following simple push button circuit with input 3v from the Raspberry Pi, and output to PIN10 (GPIO1) image
  • Note: When the button is not pressed, the power flows to ground. This keeps the button in a strictly on/off state*
  1. Clone this repo
  2. Install docker and docker-compose on the Pi
  3. Run docker-compose up -d