esp_camera_init(): Camera probe failed with error 0x103

[NiKola-it]

hi,
have this error and costant reboot on esp32-camera with AI thinker camera. modified example as code:
#define CAMERA_MODEL_AI_THINKER
but i get this error:

`Camera Ready! Use 'http://192.168.4.1:81' to stream
Motion detected[E][camera.c:1379] esp_camera_init(): Camera probe failed with error 0x103
Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled.
Core 1 register dump:
PC : 0x400d0d39 PS : 0x00060330 A0 : 0x800d0fe2 A1 : 0x3ffb1e90
A2 : 0x00000103 A3 : 0x00000005 A4 : 0x00000001 A5 : 0x0000001e
A6 : 0x01312d00 A7 : 0x00000000 A8 : 0x800d0d39 A9 : 0x3ffb1e70
A10 : 0x00000000 A11 : 0x00000103 A12 : 0x8008be38 A13 : 0x3ffb1df0
A14 : 0x00000000 A15 : 0x3ffb0060 SAR : 0x00000004 EXCCAUSE: 0x0000001c
EXCVADDR: 0x00000040 LBEG : 0x400014fd LEND : 0x4000150d LCOUNT : 0xfffffffb

ELF file SHA256: 0000000000000000

Backtrace: 0x400d0d39:0x3ffb1e90 0x400d0fdf:0x3ffb1f10 0x400d23d1:0x3ffb1fb0 0x4008bc26:0x3ffb1fd0

Rebooting...
`
esp32 is working well with webserver camera example of arduino ide.

thank you for any hint!

[NiKola-it]

ok, founded problem:
if (motion.ratio() > MOTION_THRESHOLD) { Serial.print("Motion detected"); // start the streaming server when motion is detected // shutdown after 20 seconds if no one connects // camera.begin(FRAMESIZE_QVGA, PIXFORMAT_JPEG); delay(2000); Serial.print("Camera Server ready! Use 'http://"); Serial.print(WiFi.softAPIP()); Serial.println(":81' to stream"); server.start(); delay(20000); server.stop(); // camera.begin(FRAMESIZE_QVGA, PIXFORMAT_GRAYSCALE); delay(2000); }
commenting out camera.begin make it work.

[eloquentarduino]

Glad you found the solution.
Does it works like you expected now?

[NiKola-it]

i have to check the server part, when i try to access it i just get the image sent to the client.