diff --git a/source/install_raspberry.md b/source/install_raspberry.md
new file mode 100644
index 0000000..3c82ff0
--- /dev/null
+++ b/source/install_raspberry.md
@@ -0,0 +1,25 @@
+# Embux on a Raspberry Pi
+
+This guide explains installing Embux on Raspberry Pis. Raspberry Pis are small computers around the size of a credit card.
+Raspberry Pis are based on ARM processors, so this means we will use an ARM image.
+
+## Requirements
+
+* **Raspberry Pi:** A Raspberry Pi. This document covers Raspberry Pis 3 and 4. Other Raspberry Pis are supported officially but are less common and thus not documented here. This device will later be referred to as a "Pi".
+* **Computer:** Besides a Pi, a larger computer.
+* **SD Card:** An SD card. This is where the Embux system will be stored. Pis do not have a hard disk so they rely on portable storage solutions like SD cards. A USB is also supported. **Don't flash the old Pi OS SD card, as we will be keeping it as a backup.**
+
+## Disclaimer
+
+Tinkering with your Pi can cause damage, which could potentially brick the Raspberry Pi. Be careful with your actions.
+
+## Instructions
+
+1. Download the Embux image from the repository linked in the sidebar: **Embux Repository**. You may need to scroll down.
+2. Open a flashing tool. Embux recommends [balenaEtcher](https://etcher.balena.io) for flashing images. You can also try [Rufus](https://rufus.ie) on Windows.
+3. Insert the USB or the SD card. The device must have at least 2 GB for it to store the `tiny` image, or around 3.5 GB for the `template` image. Choose an image with `piboot` in the name, the others contain the installer but we are looking for an image that can be used as a portable OS.
+4. Click the flash button to flash the Embux installer onto your storage device.
+5. Remove the storage device. Shut the Pi down, then insert the storage device into it.
+6. Power on the Pi again. Login with username `piboot`, password `embux`.
+
+Congrats! You have a working Embux setup on your Pi!