Myuplink HA native only?

[roccolord]

This is more of a question then an issue, does it work with HA official myuplink only? I use the hacs version currently, and have F-series that has the newest firmware with 15 minutes prices and myuplink also. Interested in testing this thingie!

[enoch85]

@roccolord Thanks for the interest! Would be great with some more confirming here. So far I've been alone with all testing, and I would be grateful for more testing in different regions than my own (SE4).

I have not tested with anything else than the "official" myuplink integration. Was also using the HASS one before, but changed before I started making this.

Is there any feature you are missing in the official one? I'm thinking maybe we can compensate for that in this integration?

[roccolord]

I'm unfortunately also in SE4!

I'm just using the settings for luxury hot water, and setting different target room temps, and monitoring some other parameters. I might also need to change to the official one first :)

[enoch85]

I'm unfortunately also in SE4!

Yeah, we are basically neighbors, I'm outside of Lund. :)

Anyway, this integration will replace all your automation for the heat pump, so change to MyUplink, then install this integration and let it run. Keep in mind, you need to turn off the Nibe Smart Pricing, this integration will do that instead - -and hopefully better. :)

It's still quite new so another users input would be valuable!

[roccolord]

One more question, will it work with f-series that has myuplink? I have a f1255-16. I guess one also needs the subscription too change values I myuplink?

[enoch85]

One more question, will it work with f-series that has myuplink? I have a f1255-16. I guess one also needs the subscription too change values I myuplink?

The only one I can confirm is the F750, since that's what I have. It should work with all Nibe pumps though.

You will need to get a subscription for "Hantera". You don't need the full with history and the top tier.

[enoch85]

I can also add, it's not perfect yet. I'm still trying to get it to not overshoot so much. I'd recommend a setting of like 0.5-1 degree less than what you want as it right now have a tendency to heat as soon as DM go minus - even with warm weather and a weather forecast that's saying "no cold".

As mentioned before, it's working, but I'm still testing it. I'd be super happy with more input though. 👍🏼

[enoch85]

I have made several improvements both to heating and to DHW over the past few days. Water should now be stable, at least from my testing.

[enoch85]

Even more improvements now. Here's one example from today

It's super precise in it's logic, almost precisely by the minute the classification got cheap it had planned for DHW heating.

In this case I had set that I wanted 5 min of water to be ready until 20:00. It executed perfectly! It decided to continue to heat here since we were in a cheap stable period (and some other logic as well) - but all and all, I'm pleased.

[roccolord]

Skall snart hoppa på detta! Skall bara byta HA hårdvara och i den vevan byta till HA Myuplink istället för 3dje part. Är så trött på Nibe och deras Smart price adaptation, VP klarar ju inte ens att hämta priserna med någon säkerhet och kör vissa dagar utan priser, vilket ju inte är smart. Gott nytt år!

[enoch85]

Kul!

Förvänta dig inga under. :D Jag tycker den funkar bra, men det finns rum för förbättring. Bra med mer data som jag kan debugga! 👍

Gott nytt!