esp32_s3_eye.c

/*
 * SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <stdio.h>
#include "esp_vfs_fat.h"
#include "esp_lcd_panel_io.h"
#include "esp_lcd_panel_vendor.h"
#include "esp_lcd_panel_ops.h"
#include "esp_log.h"
#include "esp_check.h"
#include "esp_vfs_fat.h"
#include "esp_spiffs.h"

#include "freertos/FreeRTOS.h"
#include "freertos/task.h"

#include "driver/spi_master.h"
#include "driver/ledc.h"
#include "driver/i2c.h"

#include "bsp/esp32_s3_eye.h"
#include "bsp_err_check.h"
#include "bsp/display.h"

static const char *TAG = "S3-EYE";

sdmmc_card_t *bsp_sdcard = NULL;    // Global uSD card handler
static bool i2c_initialized = false;
#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0)
static adc_oneshot_unit_handle_t bsp_adc_handle = NULL;
#endif

static const button_config_t bsp_button_config[BSP_BUTTON_NUM] = {
    {
        .type = BUTTON_TYPE_ADC,
#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0)
        .adc_button_config.adc_handle = &bsp_adc_handle,
#endif
        .adc_button_config.adc_channel = ADC_CHANNEL_0, // ADC1 channel 0 is GPIO1
        .adc_button_config.button_index = BSP_BUTTON_MENU,
        .adc_button_config.min = 2310, // middle is 2410mV
        .adc_button_config.max = 2510
    },
    {
        .type = BUTTON_TYPE_ADC,
#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0)
        .adc_button_config.adc_handle = &bsp_adc_handle,
#endif
        .adc_button_config.adc_channel = ADC_CHANNEL_0, // ADC1 channel 0 is GPIO1
        .adc_button_config.button_index = BSP_BUTTON_PLAY,
        .adc_button_config.min = 1880, // middle is 1980mV
        .adc_button_config.max = 2080
    },
    {
        .type = BUTTON_TYPE_ADC,
#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0)
        .adc_button_config.adc_handle = &bsp_adc_handle,
#endif
        .adc_button_config.adc_channel = ADC_CHANNEL_0, // ADC1 channel 0 is GPIO1
        .adc_button_config.button_index = BSP_BUTTON_DOWN,
        .adc_button_config.min = 720, // middle is 820mV
        .adc_button_config.max = 920
    },
    {
        .type = BUTTON_TYPE_ADC,
#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0)
        .adc_button_config.adc_handle = &bsp_adc_handle,
#endif
        .adc_button_config.adc_channel = ADC_CHANNEL_0, // ADC1 channel 0 is GPIO1
        .adc_button_config.button_index = BSP_BUTTON_UP,
        .adc_button_config.min = 280, // middle is 380mV
        .adc_button_config.max = 480
    },
    {
        .type = BUTTON_TYPE_GPIO,
        .gpio_button_config.active_level = 0,
        .gpio_button_config.gpio_num = BSP_BUTTON_BOOT_IO
    }
};

esp_err_t bsp_i2c_init(void)
{
    /* I2C was initialized before */
    if (i2c_initialized) {
        return ESP_OK;
    }

    const i2c_config_t i2c_conf = {
        .mode = I2C_MODE_MASTER,
        .sda_io_num = BSP_I2C_SDA,
        .sda_pullup_en = GPIO_PULLUP_ENABLE,
        .scl_io_num = BSP_I2C_SCL,
        .scl_pullup_en = GPIO_PULLUP_ENABLE,
        .master.clk_speed = CONFIG_BSP_I2C_CLK_SPEED_HZ
    };
    BSP_ERROR_CHECK_RETURN_ERR(i2c_param_config(BSP_I2C_NUM, &i2c_conf));
    BSP_ERROR_CHECK_RETURN_ERR(i2c_driver_install(BSP_I2C_NUM, i2c_conf.mode, 0, 0, 0));

    i2c_initialized = true;

    return ESP_OK;
}

esp_err_t bsp_i2c_deinit(void)
{
    BSP_ERROR_CHECK_RETURN_ERR(i2c_driver_delete(BSP_I2C_NUM));
    i2c_initialized = false;
    return ESP_OK;
}

esp_err_t bsp_spiffs_mount(void)
{
    esp_vfs_spiffs_conf_t conf = {
        .base_path = CONFIG_BSP_SPIFFS_MOUNT_POINT,
        .partition_label = CONFIG_BSP_SPIFFS_PARTITION_LABEL,
        .max_files = CONFIG_BSP_SPIFFS_MAX_FILES,
#ifdef CONFIG_BSP_SPIFFS_FORMAT_ON_MOUNT_FAIL
        .format_if_mount_failed = true,
#else
        .format_if_mount_failed = false,
#endif
    };

    esp_err_t ret_val = esp_vfs_spiffs_register(&conf);

    BSP_ERROR_CHECK_RETURN_ERR(ret_val);

    size_t total = 0, used = 0;
    ret_val = esp_spiffs_info(conf.partition_label, &total, &used);
    if (ret_val != ESP_OK) {
        ESP_LOGE(TAG, "Failed to get SPIFFS partition information (%s)", esp_err_to_name(ret_val));
    } else {
        ESP_LOGI(TAG, "Partition size: total: %d, used: %d", total, used);
    }

    return ret_val;
}

esp_err_t bsp_spiffs_unmount(void)
{
    return esp_vfs_spiffs_unregister(CONFIG_BSP_SPIFFS_PARTITION_LABEL);
}

esp_err_t bsp_sdcard_mount(void)
{
    const esp_vfs_fat_sdmmc_mount_config_t mount_config = {
#ifdef CONFIG_BSP_SD_FORMAT_ON_MOUNT_FAIL
        .format_if_mount_failed = true,
#else
        .format_if_mount_failed = false,
#endif
        .max_files = 5,
        .allocation_unit_size = 16 * 1024
    };

    const sdmmc_host_t host = SDMMC_HOST_DEFAULT();
    const sdmmc_slot_config_t slot_config = {
        .clk = BSP_SD_CLK,
        .cmd = BSP_SD_CMD,
        .d0 = BSP_SD_D0,
        .d1 = GPIO_NUM_NC,
        .d2 = GPIO_NUM_NC,
        .d3 = GPIO_NUM_NC,
        .d4 = GPIO_NUM_NC,
        .d5 = GPIO_NUM_NC,
        .d6 = GPIO_NUM_NC,
        .d7 = GPIO_NUM_NC,
        .cd = SDMMC_SLOT_NO_CD,
        .wp = SDMMC_SLOT_NO_WP,
        .width = 1,
        .flags = 0,
    };

#if !CONFIG_FATFS_LONG_FILENAMES
    ESP_LOGW(TAG, "Warning: Long filenames on SD card are disabled in menuconfig!");
#endif

    return esp_vfs_fat_sdmmc_mount(BSP_SD_MOUNT_POINT, &host, &slot_config, &mount_config, &bsp_sdcard);
}

esp_err_t bsp_sdcard_unmount(void)
{
    return esp_vfs_fat_sdcard_unmount(BSP_SD_MOUNT_POINT, bsp_sdcard);
}

#define LCD_CMD_BITS         (8)
#define LCD_PARAM_BITS       (8)
#define LCD_LEDC_CH          (CONFIG_BSP_DISPLAY_BRIGHTNESS_LEDC_CH)
#define LVGL_TICK_PERIOD_MS  (CONFIG_BSP_DISPLAY_LVGL_TICK)
#define LVGL_MAX_SLEEP_MS    (CONFIG_BSP_DISPLAY_LVGL_MAX_SLEEP)

esp_err_t bsp_display_brightness_init(void)
{
    // Setup LEDC peripheral for PWM backlight control
    const ledc_channel_config_t LCD_backlight_channel = {
        .gpio_num = BSP_LCD_BACKLIGHT,
        .speed_mode = LEDC_LOW_SPEED_MODE,
        .channel = LCD_LEDC_CH,
        .intr_type = LEDC_INTR_DISABLE,
        .timer_sel = 1,
        .duty = 0,
        .hpoint = 0,
        .flags.output_invert = true
    };
    const ledc_timer_config_t LCD_backlight_timer = {
        .speed_mode = LEDC_LOW_SPEED_MODE,
        .duty_resolution = LEDC_TIMER_10_BIT,
        .timer_num = 1,
        .freq_hz = 5000,
        .clk_cfg = LEDC_AUTO_CLK
    };

    BSP_ERROR_CHECK_RETURN_ERR(ledc_timer_config(&LCD_backlight_timer));
    BSP_ERROR_CHECK_RETURN_ERR(ledc_channel_config(&LCD_backlight_channel));

    return ESP_OK;
}

esp_err_t bsp_display_brightness_set(int brightness_percent)
{
    if (brightness_percent > 100) {
        brightness_percent = 100;
    } else if (brightness_percent < 0) {
        brightness_percent = 0;
    }

    ESP_LOGI(TAG, "Setting LCD backlight: %d%%", brightness_percent);
    // LEDC resolution set to 10bits, thus: 100% = 1023
    uint32_t duty_cycle = (1023 * brightness_percent) / 100;
    BSP_ERROR_CHECK_RETURN_ERR(ledc_set_duty(LEDC_LOW_SPEED_MODE, LCD_LEDC_CH, duty_cycle));
    BSP_ERROR_CHECK_RETURN_ERR(ledc_update_duty(LEDC_LOW_SPEED_MODE, LCD_LEDC_CH));

    return ESP_OK;
}

esp_err_t bsp_display_backlight_off(void)
{
    return bsp_display_brightness_set(0);
}

esp_err_t bsp_display_backlight_on(void)
{
    return bsp_display_brightness_set(100);
}

esp_err_t bsp_display_new(const bsp_display_config_t *config, esp_lcd_panel_handle_t *ret_panel, esp_lcd_panel_io_handle_t *ret_io)
{
    esp_err_t ret = ESP_OK;
    assert(config != NULL && config->max_transfer_sz > 0);

    ESP_RETURN_ON_ERROR(bsp_display_brightness_init(), TAG, "Brightness init failed");

    ESP_LOGD(TAG, "Initialize SPI bus");
    const spi_bus_config_t buscfg = {
        .sclk_io_num = BSP_LCD_SPI_CLK,
        .mosi_io_num = BSP_LCD_SPI_MOSI,
        .miso_io_num = GPIO_NUM_NC,
        .quadwp_io_num = GPIO_NUM_NC,
        .quadhd_io_num = GPIO_NUM_NC,
        .max_transfer_sz = config->max_transfer_sz,
    };
    ESP_RETURN_ON_ERROR(spi_bus_initialize(BSP_LCD_SPI_NUM, &buscfg, SPI_DMA_CH_AUTO), TAG, "SPI init failed");

    ESP_LOGD(TAG, "Install panel IO");
    const esp_lcd_panel_io_spi_config_t io_config = {
        .dc_gpio_num = BSP_LCD_DC,
        .cs_gpio_num = BSP_LCD_SPI_CS,
        .pclk_hz = BSP_LCD_PIXEL_CLOCK_HZ,
        .lcd_cmd_bits = LCD_CMD_BITS,
        .lcd_param_bits = LCD_PARAM_BITS,
        .spi_mode = 2,
        .trans_queue_depth = 10,
    };
    ESP_GOTO_ON_ERROR(esp_lcd_new_panel_io_spi((esp_lcd_spi_bus_handle_t)BSP_LCD_SPI_NUM, &io_config, ret_io), err, TAG, "New panel IO failed");

    ESP_LOGD(TAG, "Install LCD driver");
    const esp_lcd_panel_dev_config_t panel_config = {
        .reset_gpio_num = BSP_LCD_RST,
        .color_space = BSP_LCD_COLOR_SPACE,
        .bits_per_pixel = BSP_LCD_BITS_PER_PIXEL,
    };
    ESP_GOTO_ON_ERROR(esp_lcd_new_panel_st7789(*ret_io, &panel_config, ret_panel), err, TAG, "New panel failed");


    esp_lcd_panel_reset(*ret_panel);
    esp_lcd_panel_init(*ret_panel);
    esp_lcd_panel_invert_color(*ret_panel, true);
    return ret;

err:
    if (*ret_panel) {
        esp_lcd_panel_del(*ret_panel);
    }
    if (*ret_io) {
        esp_lcd_panel_io_del(*ret_io);
    }
    spi_bus_free(BSP_LCD_SPI_NUM);
    return ret;
}

#if (BSP_CONFIG_NO_GRAPHIC_LIB == 0)
static lv_display_t *bsp_display_lcd_init(const bsp_display_cfg_t *cfg)
{
    assert(cfg != NULL);
    esp_lcd_panel_io_handle_t io_handle = NULL;
    esp_lcd_panel_handle_t panel_handle = NULL;
    const bsp_display_config_t bsp_disp_cfg = {
        .max_transfer_sz = BSP_LCD_DRAW_BUFF_SIZE * sizeof(uint16_t),
    };
    BSP_ERROR_CHECK_RETURN_NULL(bsp_display_new(&bsp_disp_cfg, &panel_handle, &io_handle));

#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 0, 0)
    esp_lcd_panel_disp_off(panel_handle, false);
#else
    esp_lcd_panel_disp_on_off(panel_handle, true);
#endif

    /* Add LCD screen */
    ESP_LOGD(TAG, "Add LCD screen");
    const lvgl_port_display_cfg_t disp_cfg = {
        .io_handle = io_handle,
        .panel_handle = panel_handle,
        .buffer_size = cfg->buffer_size,
        .double_buffer = cfg->double_buffer,
        .hres = BSP_LCD_H_RES,
        .vres = BSP_LCD_V_RES,
        .monochrome = false,
        /* Rotation values must be same as used in esp_lcd for initial settings of the screen */
        .rotation = {
            .swap_xy = false,
            .mirror_x = false,
            .mirror_y = false,
        },
        .flags = {
            .buff_dma = cfg->flags.buff_dma,
            .buff_spiram = cfg->flags.buff_spiram,
#if LVGL_VERSION_MAJOR >= 9
            .swap_bytes = (BSP_LCD_BIGENDIAN ? true : false),
#endif
        }
    };

    return lvgl_port_add_disp(&disp_cfg);
}

lv_display_t *bsp_display_start(void)
{
    bsp_display_cfg_t cfg = {
        .lvgl_port_cfg = {
            .task_priority = CONFIG_BSP_DISPLAY_LVGL_TASK_PRIORITY,
            .task_stack = 6144,
            .task_affinity = 1,
            .timer_period_ms = LVGL_TICK_PERIOD_MS,
            .task_max_sleep_ms = LVGL_MAX_SLEEP_MS,
        },
        .buffer_size = BSP_LCD_DRAW_BUFF_SIZE,
        .double_buffer = BSP_LCD_DRAW_BUFF_DOUBLE,
        .flags = {
            .buff_dma = true,
            .buff_spiram = false,
        }
    };
    return bsp_display_start_with_config(&cfg);
}

lv_display_t *bsp_display_start_with_config(const bsp_display_cfg_t *cfg)
{
    lv_display_t *disp;
    assert(cfg != NULL);
    BSP_ERROR_CHECK_RETURN_NULL(lvgl_port_init(&cfg->lvgl_port_cfg));
    BSP_NULL_CHECK(disp = bsp_display_lcd_init(cfg), NULL);

    return disp;
}

lv_indev_t *bsp_display_get_input_dev(void)
{
    return NULL;
}

bool bsp_display_lock(uint32_t timeout_ms)
{
    return lvgl_port_lock(timeout_ms);
}

void bsp_display_unlock(void)
{
    lvgl_port_unlock();
}

void bsp_display_rotate(lv_display_t *disp, lv_disp_rotation_t rotation)
{
    lv_disp_set_rotation(disp, rotation);
}
#endif // (BSP_CONFIG_NO_GRAPHIC_LIB == 0)

esp_err_t bsp_leds_init(void)
{
    const gpio_config_t led_io_config = {
        .pin_bit_mask = BIT64(BSP_LED_GREEN),
        .mode = GPIO_MODE_OUTPUT_OD, // GPIO3 is connected directly to the LED (on board revision 2.1), so we use Open-drain here
        .pull_up_en = GPIO_PULLUP_DISABLE,
        .pull_down_en = GPIO_PULLDOWN_DISABLE,
        .intr_type = GPIO_INTR_DISABLE
    };
    BSP_ERROR_CHECK_RETURN_ERR(gpio_config(&led_io_config));
    return ESP_OK;
}

esp_err_t bsp_led_set(const bsp_led_t led_io, const bool on)
{
    BSP_ERROR_CHECK_RETURN_ERR(gpio_set_level((gpio_num_t) led_io, (uint32_t) on));
    return ESP_OK;
}

esp_codec_dev_handle_t bsp_audio_codec_microphone_init(void)
{
    const audio_codec_data_if_t *i2s_data_if = bsp_audio_get_codec_itf();
    if (i2s_data_if == NULL) {
        /* Initilize I2C */
        BSP_ERROR_CHECK_RETURN_NULL(bsp_i2c_init());
        /* Configure I2S peripheral and Power Amplifier */
        BSP_ERROR_CHECK_RETURN_NULL(bsp_audio_init(NULL));
        i2s_data_if = bsp_audio_get_codec_itf();
    }
    assert(i2s_data_if);

    esp_codec_dev_cfg_t codec_dev_cfg = {
        .dev_type = ESP_CODEC_DEV_TYPE_IN,
        .codec_if = NULL,
        .data_if = i2s_data_if,
    };
    return esp_codec_dev_new(&codec_dev_cfg);
}

esp_err_t bsp_iot_button_create(button_handle_t btn_array[], int *btn_cnt, int btn_array_size)
{
    esp_err_t ret = ESP_OK;
    if ((btn_array_size < BSP_BUTTON_NUM) ||
            (btn_array == NULL)) {
        return ESP_ERR_INVALID_ARG;
    }
#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0)
    /* Initialize ADC and get ADC handle */
    BSP_ERROR_CHECK_RETURN_NULL(bsp_adc_initialize());
    bsp_adc_handle = bsp_adc_get_handle();
#endif

    if (btn_cnt) {
        *btn_cnt = 0;
    }
    for (int i = 0; i < BSP_BUTTON_NUM; i++) {
        btn_array[i] = iot_button_create(&bsp_button_config[i]);
        if (btn_array[i] == NULL) {
            ret = ESP_FAIL;
            break;
        }
        if (btn_cnt) {
            (*btn_cnt)++;
        }
    }
    return ret;
}