1 phase / 3 phase switch visible, but shouldn't

[nelli81]

Describe the bug

i've implemented my boiler into evcc. Everything is configured for 1 phase only, but in the frontend i still can switch to 3 phases.

Steps to reproduce

1. Install evcc
2. configure a boiler as custom integration
3. try to switch to 3 phases

Configuration details

meters:
  - name: boiler
    type: template
    template: shelly-1pm
    usage: charge
    host: 192.168.1.93
    channel: 0

chargers:
  - name: boiler
    type: custom
    status:
      source: mqtt
      topic: homassistant_evcc/boiler/status
      timeout: 60s
    enabled:
      source: http
      uri: http://192.168.1.95/rpc/Shelly.GetStatus?id=0
      jq: if ."switch:0".output == true then 1 else 0 end
    enable:
      source: http
      uri: http://192.168.1.95/relay/0?turn={{if .enable}}on{{else}}off{{end}}
    maxcurrent:
      source: script
      cmd: /bin/sh -c 'echo 10'
    features:
      - integrateddevice
      - heating 

vehicles:
  - name: boiler
    type: template
    template: offline
    title: Boiler
    icon: waterheater
    phases: 1
    mincurrent: 3
    maxcurrent: 10

loadpoints:
  - title: Boiler
    charger: boiler
    meter: boiler
    vehicle: boiler
    priority: 1
    enable:
      threshold: -2000
      delay: 15m
    disable:
      threshold: 0
      delay: 15m
    phases: 1

Log details

[lp-2 ] WARN 2024/09/17 10:15:30 deprecated: phases setting is ignored, please remove
[lp-2 ] DEBUG 2024/09/17 10:15:30 charge total import: 199.760kWh
[site ] WARN 2024/09/17 10:15:32 vehicle 'Boiler' does not support automatic detection
[site ] INFO 2024/09/17 10:15:32 site config:
[site ] INFO 2024/09/17 10:15:32 meters: grid ✓ pv ✓ battery ✗
[site ] INFO 2024/09/17 10:15:32 grid: power ✓ energy ✗ currents ✓
[site ] INFO 2024/09/17 10:15:32 pv 1: power ✓ energy ✗ currents ✓
[site ] INFO 2024/09/17 10:15:32 vehicles:
[site ] INFO 2024/09/17 10:15:32 vehicle 2: range ✗ finish ✗ status ✗ climate ✗ wakeup ✗
[lp-2 ] INFO 2024/09/17 10:15:32 loadpoint 2:
[lp-2 ] INFO 2024/09/17 10:15:32 mode: off
[lp-2 ] INFO 2024/09/17 10:15:32 charger: power ✗ energy ✗ currents ✗ phases ✗ wakeup ✗
[lp-2 ] INFO 2024/09/17 10:15:32 meters: charge ✓
[lp-2 ] INFO 2024/09/17 10:15:32 charge: power ✓ energy ✓ currents ✗
[lp-2 ] DEBUG 2024/09/17 10:15:32 phase timer inactive
[lp-2 ] DEBUG 2024/09/17 10:15:32 pv timer inactive
[lp-2 ] INFO 2024/09/17 10:15:32 vehicle updated: unknown -> Boiler
[site ] WARN 2024/09/17 10:15:32 interval <30s can lead to unexpected behavior, see https://docs.evcc.io/docs/reference/configuration/interval
[site ] DEBUG 2024/09/17 10:15:32 ----
[lp-2 ] DEBUG 2024/09/17 10:15:32 charge power: 8W
[site ] DEBUG 2024/09/17 10:15:44 pv power: 6730W
[site ] DEBUG 2024/09/17 10:15:44 grid meter: -4946W
[site ] DEBUG 2024/09/17 10:15:44 grid currents: [-2.66 -9.03 -9.06]A
[site ] DEBUG 2024/09/17 10:15:44 site power: -4746W
[site ] DEBUG 2024/09/17 10:16:00 ----
[lp-2 ] DEBUG 2024/09/17 10:16:00 charge power: 8W
[site ] DEBUG 2024/09/17 10:16:00 pv power: 6735W
[site ] DEBUG 2024/09/17 10:16:00 grid meter: -4918W
[site ] DEBUG 2024/09/17 10:16:00 grid currents: [-2.51 -9.06 -9.09]A
[site ] DEBUG 2024/09/17 10:16:00 site power: -4718W
[site ] DEBUG 2024/09/17 10:16:00 ----
[lp-2 ] DEBUG 2024/09/17 10:16:00 charge power: 8W
[site ] DEBUG 2024/09/17 10:16:00 pv power: 6735W
[site ] DEBUG 2024/09/17 10:16:00 grid meter: -4918W
[site ] DEBUG 2024/09/17 10:16:00 grid currents: [-2.51 -9.06 -9.09]A
[site ] DEBUG 2024/09/17 10:16:00 site power: -4718W
[lp-2 ] DEBUG 2024/09/17 10:16:00 charge total import: 199.760kWh
[lp-2 ] DEBUG 2024/09/17 10:16:00 charger status: B
[lp-2 ] DEBUG 2024/09/17 10:16:00 charge start energy: 199.760kWh
[lp-2 ] INFO 2024/09/17 10:16:00 car connected
[lp-2 ] DEBUG 2024/09/17 10:16:00 pv timer elapse
[lp-2 ] DEBUG 2024/09/17 10:16:00 pv timer inactive
[lp-2 ] DEBUG 2024/09/17 10:16:00 charge total import: 199.760kWh
[site ] DEBUG 2024/09/17 10:16:02 ----
[lp-2 ] DEBUG 2024/09/17 10:16:02 charge power: 9W
[site ] DEBUG 2024/09/17 10:16:02 pv power: 6735W
[site ] DEBUG 2024/09/17 10:16:02 grid meter: -4918W
[site ] DEBUG 2024/09/17 10:16:02 grid currents: [-2.51 -9.06 -9.09]A
[site ] DEBUG 2024/09/17 10:16:02 site power: -4718W

What type of operating system are you running?

HomeAssistant Add-on

Nightly build

• I have verified that the issue is reproducible with the latest nightly build

Version

0.130.11

[VolkerK62]

as intended. Only switchsockets are fixed defined to 1p

[nelli81]

Auch wenn das virtuelle Fahrzeug auf 1 Phase fixiert wird?

vehicles:
  - name: boiler
    phases: 1

Macht ja irgendiwe keinen Sinn, 3 Phasen freizugeben wenn das Fahrzeug nur 1 Phase unterstützt...

[VolkerK62]

Die Einstellung heißt "How is your charger connected?".
Das hat erstmal nix mit dem Fahrzeug zu tun.

Ich könnte mir vorstellen, dass du in dem Fall dort auch 3p einstellen kannst und die interne Berechnung trotzdem (wegen vehicle) auf 1p bleibt.

[nelli81]

Den Charger selber kann ich ja nicht auf 1 Phase fixieren, damit dies nicht angezeigt wird?