Replies: 9 comments 15 replies
-
stimmt denn die IP-Adresse..? starte mal evcc neu und schau mal, welche evcc.yaml / evcc.db verwendet wird.. unterscheidet sich ggfs. von der Version, die beim Aufruf |
Beta Was this translation helpful? Give feedback.
-
Hallo |
Beta Was this translation helpful? Give feedback.
-
Ich habe auch schon Alles probiert, ein Trost gibts es ja, da bin ich wenigsten nicht Alleine. |
Beta Was this translation helpful? Give feedback.
-
kann aber nicht wirklich jetzt wahr sein das es nicht geht. |
Beta Was this translation helpful? Give feedback.
-
jemand noch eine Idee |
Beta Was this translation helpful? Give feedback.
-
Könnte das etwas damit zu tun haben? https://www.iphone-ticker.de/rotierende-wlan-adressen-koennen-smarthome-funktionen-stoeren-242156/ |
Beta Was this translation helpful? Give feedback.
-
Gerade versucht, kein Erfolg |
Beta Was this translation helpful? Give feedback.
-
Ich finde es nur schade das keiner vom Programm EVCC sich mal äußert oder generell sich mal meldet. |
Beta Was this translation helpful? Give feedback.
-
Hallo,
ich habe gestern Abend meine Mac Mini auf MacOS "Sequoia" upgedatet. Nun findet Evcc zumindest in der UI meine Geräte (Batterie, PV Wechselrichter usw ) nicht mehr.
[site ] ERROR 2024/09/17 13:51:00 pv 1 power: read failed: dial tcp 192.168.1.59:30331: connect: no route to host
[site ] DEBUG 2024/09/17 13:51:00 pv power: 0W
[site ] ERROR 2024/09/17 13:51:00 battery 1 power: read failed: dial tcp 192.168.1.59:30341: connect: no route to host
[site ] DEBUG 2024/09/17 13:51:09 ----
[lp-1 ] DEBUG 2024/09/17 13:51:09 charge power: 0W
[lp-2 ] DEBUG 2024/09/17 13:51:09 charge power: 0W
[site ] ERROR 2024/09/17 13:51:09 pv 1 power: read failed: dial tcp 192.168.1.59:30331: connect: no route to host
[site ] DEBUG 2024/09/17 13:51:09 pv power: 0W
[site ] ERROR 2024/09/17 13:51:10 battery 1 power: read failed: dial tcp 192.168.1.59:30341: connect: no route to host
[site ] DEBUG 2024/09/17 13:51:19 ----
[lp-1 ] DEBUG 2024/09/17 13:51:19 charge power: 0W
[lp-2 ] DEBUG 2024/09/17 13:51:19 charge power: 0W
[site ] ERROR 2024/09/17 13:51:19 pv 1 power: read failed: dial tcp 192.168.1.59:30331: connect: no route to host
[site ] DEBUG 2024/09/17 13:51:19 pv power: 0W
[site ] ERROR 2024/09/17 13:51:20 battery 1 power: read failed: dial tcp 192.168.1.59:30341: connect: no route to host
Im Terminal-Fenster kann ich nach Aufruf von "evcc meter" die richtigen Werte abrufen.
[juergen@Mac-mini-von-Jurgen-5 ~ % evcc meter
[main ] INFO 2024/09/17 13:53:46 evcc 0.130.11
[main ] INFO 2024/09/17 13:53:46 using config file: /etc/evcc.yaml
[db ] INFO 2024/09/17 13:53:46 using sqlite database: /Users/juergen/.evcc/evcc.db
pv1
Power: 18589W
Energy: 619.8kWh
grid1
Power: -60W
Current L1..L3: 10.7A -6.33A 5.52A
battery1
Power: -11118W
Energy: 43898.0kWh
Soc: 38%
Controllable: true
Hat jemand das selbe Problem oder vielleicht sogar eine Lösung?
Beta Was this translation helpful? Give feedback.
All reactions