Laden schwingt auf in Kombination mit Hausakku #16220
Replies: 3 comments
-
Welchen interval hast du? Versuche mal den kleiner zu machen. Evcc erwartet, dass nach jedem interval die Werte umgesetzt wurden. Wenn deine Komponenten länger brauchen kann es zum Schwingen kommen. |
Beta Was this translation helpful? Give feedback.
-
Versuche mal den Intervall in der Yaml auf 30s oder höher zu stellen. Das sollte das Aufschwingen verhindern. |
Beta Was this translation helpful? Give feedback.
-
Hallo zusammen, Naja ich probier jetzt mal 30 Sekunden und stelle sukzessive weiter rauf. interval: 30s Blöde Frage - wo muss das hin in der YAML? Egal? Also einfach ganz unten? |
Beta Was this translation helpful? Give feedback.
-
Hallo zusammen,
ich habe schon länger EVCC mit zwei EASEE Home Wallboxen laufen. Soweit so gut...
Aber seitdem ich meinen Hausakku über die Deye "Cloud" mit integriert habe, schwingt sich der ganze Ladevorgang extrem auf, wenn der Hausakku NICHT voll ist. Ich denke das liegt an der trägen Reaktionszeit von 3-5 Sec. bis die aktuellen Daten vom Hausakku an EVCC gesendet werden.
So sieht das ganze dann aus:
Hier ist durchaus eine Regelmäßigkeit zu erkennen:
Meine YAML lautet wie folgt:
`meters:
type: template
template: discovergy
usage: grid
user: *****
password: *****
meter: *****
name: pv3
type: template
template: discovergy
usage: pv
user: *****
password: *****
meter: *****
name: pv4
name: Deye-SOC
type: custom
soc:
source: http
method: GET
uri: http://192.168.178.100:8087/getPlainValue/deyeidc.0.2770174993.Battery_Level
power:
source: http
method: GET
uri: http://192.168.178.100:8087/getPlainValue/deyeidc.0.2770174993.Battery_Output
loadpoints:
title: Garage
charger: wallbox7
vehicle: ev5
mode: pv
phases: 3
mincurrent: 6
maxcurrent: 10
priority: 9
title: Stellplatz
charger: wallbox8
vehicle: ev6
mode: pv
phases: 3
mincurrent: 6
maxcurrent: 20
priority: 5
site:
title: Mein Zuhause
meters:
grid: pv3
pv: pv4
battery: Deye-SOC
residualPower: 150`
Hat jemand eine Idee an welcher Stellschraube ich drehen muss?
Ggf. den Akku komplett "raus nehmen"? Ich möchte in naher Zukunft noch eine Modbus Verbindung direkt zwischen Deye und EVCC herstellen, aber da fehlt mir aktuell die passende Hardware und Zeit...
Danke
Mfg
Manuel
Beta Was this translation helpful? Give feedback.
All reactions