cloudline-exhaust-rgb-led.yaml

# This configuration allows a Shelly-RGBW2 to contol an AC Infinity Cloudline
# exhaust fan.
#
# This version of the config supports a pushbutton to cycle through fan speeds,
# and expects you to use RGB LEDs as a status indicator, which will change color
# from red to green to blue based on the fan speed.
#
# For the most up to date version of this config, see:
# https://github.com/ex-nerd/esphome-shelly-cloudline
#
# For details about Shelly, see: https://devices.esphome.io/devices/Shelly-RGBW2

esphome:
  name: cloudline-exhaust
  friendly_name: Cloudline Exhaust

esp8266:
  board: esp01_1m
  restore_from_flash: true

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: !secret api_encryption_key

ota:
  password: !secret ota_password

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "${name} ESPHome"
    password: !secret fallback_hotspot_password

captive_portal:

script:
  - id: set_led
    then:
      lambda: |-
        float set_brightness = id(brightness).state / 100.0;
        if (std::isnan(set_brightness) || set_brightness > 1.0) {
          set_brightness = 1.0;
        }
  
        // If fan is off or brightness is zero, then just ensure the LED is off
        if (!id(fan_speed).state || set_brightness < 0.1) {
          auto call = id(rgb_led).turn_off();
          call.set_transition_length(0);
          call.perform();
          return;
        }
  
        // Otherwise, set the appropriate color
        auto call = id(rgb_led).turn_on();
        switch (id(fan_speed).speed) {
          case 1:
            // red
            call.set_rgb(1.0, 0.0, 0.0);
            break;
          case 2:
            // orange
            call.set_rgb(1.0, 0.5, 0.1);
            break;
          case 3:
            // yellow
            call.set_rgb(1.0, 0.9, 0.0);
            set_brightness *= 0.9;
            break;
          case 4:
            // yellow-green
            call.set_rgb(0.8, 1.0, 0.0);
            set_brightness *= 0.8;
            break;
          case 5:
            // green
            call.set_rgb(0.0, 1.0, 0.1);
            break;
          case 6:
            // light blue
            call.set_rgb(0.2, 0.75, 1.0);
            break;
        }
        call.set_brightness(set_brightness);
        call.set_transition_length(0);
        call.perform();

number:
  - platform: template
    name: "Brightness"
    id: "brightness"
    unit_of_measurement: "%"
    initial_value: 90
    optimistic: true
    step: 1
    min_value: 0
    max_value: 100
    mode: slider
    icon: mdi:power-settings
    restore_value: true
    on_value:
      then:
        - script.execute: set_led

fan:
  - platform: speed
    name: "Fan"
    id: fan_speed
    output: pwm_fan
    speed_count: 6
    restore_mode: ALWAYS_OFF
    on_turn_off:
      # - logger.log: "Fan turned OFF"
      - script.execute: set_led
    on_turn_on:
      # - logger.log: "Fan turned ON"
      - script.execute: set_led
    on_speed_set:
      # - logger.log:
      #     format: "Fan Speed was changed to %d!"
      #     args: [ x ]
      - script.execute: set_led

light:
  - platform: rgb
    name: "Speed Indicator"
    id: rgb_led
    red: pwm_r
    green: pwm_g
    blue: pwm_b
    restore_mode: ALWAYS_OFF
    internal: true

binary_sensor:
  # Switch input
  - platform: gpio
    pin: GPIO5
    id: button
    on_press:
      - fan.cycle_speed: fan_speed

output:
  # W connection goes to the fan
  - platform: esp8266_pwm
    pin: GPIO4
    frequency: 5000 Hz
    id: pwm_fan
    inverted: true

  # R for red LED
  - platform: esp8266_pwm
    pin: GPIO12
    frequency: 1000 Hz
    id: pwm_r
    # Uncomment if your blue lED is dim
    # max_power: 80%

  # G for green LED
  - platform: esp8266_pwm
    pin: GPIO15
    frequency: 1000 Hz
    id: pwm_g
    # Uncomment if your blue lED is dim
    # max_power: 80%

  # B for blue LED
  - platform: esp8266_pwm
    pin: GPIO14
    frequency: 1000 Hz
    id: pwm_b