Espressif keeps improving the performance of its SoCs by providing new chip revisions. However, some of the improvements require special software support. Some of the software supports are even mandatory for the chip revisions to run normally.
This document describes the compatibility between ESP-IDF releases and Espressif SoC revisions.
NOTE: This document on release branches may be out-of-date. Check the Compatibility file on master for the most accurate information.
See Compatibility Advisory for Chip Revision Numbering Scheme on the versioning of Espressif SoC revisions.
You can run esptool chip_id to detect the series and revision of an SoC. See SoC Errata for more on how to distinguish between chip revisions, and the improvements provided by chip revisions. And run idf.py --version to know the version of current ESP-IDF.
The sections below show the requirements to ESP-IDF version of chip revisions. Each chip revision corresponds to specific Recommended and Required versions of ESP-IDF:
-
Recommended: shows from which version of ESP-IDF you can make use of all the improvements of the chip revision. Running binary compiled with ESP-IDF below theRecommendedversion of a chip revision, software may not benefit from the bugfix/features provided by the chip revision. The chip will have almost the same behavior as its previous revision. -
Required: shows the minimum version required to run the chip revision normally. Running binary compiled below theRequiredversion, the binary may have unpredictable behavior.
Though the software can make use of all the features of a chip revision, if its version is higher than the Recommended version of the chip, it is still recommended to use the latest bugfix version of the release branch. The latest bugfix version fixes a number of issues and helps improve product stability.
For example, if we have a chip, whose Required/Recommended version of release/v5.1 branch is v5.1.2/v5.1.4, and the latest release on that branch is v5.1.6. Then the chip will not boot up with ESP-IDF v5.1-v5.1.1 or will have unpredictable behavior, and application may not make use of all benefits of the chip, when running with ESP-IDF v5.1.2 or v5.1.3. Though v5.1.4 well supports the chip revision, it is still recommended to upgrade ESP-IDF to v5.1.6.
Supported since initial version of ESP-IDF.
To be added.
To be added.
To be added.
Supported since ESP-IDF v4.2.
| Release branch | Recommended | Required |
|---|---|---|
| release/v4.2 | v4.2.3+ | v4.2 |
| release/v4.3 | v4.3.3+ | v4.3 |
| release/v4.4 | v4.4.6+ | v4.4 |
| release/v5.0 | v5.0.4+ | v5.0 |
| release/v5.1 | v5.1.2+ | v5.1 |
| release/v5.2 and above | v5.2+ | v5.2 |
Supported since ESP-IDF v4.3.
| Release branch | Recommended | Required |
|---|---|---|
| release/v4.2 | EOL | EOL |
| release/v4.3 | v4.3.7+ | v4.3.7 |
| release/v4.4 | v4.4.7+ | v4.4.7 |
| release/v5.0 | v5.0.5+ | v5.0.5 |
| release/v5.1 | v5.1.3+ | v5.1.3 |
| release/v5.2 and above | v5.2+ | v5.2 |
Supported since ESP-IDF v4.4.
Supported since ESP-IDF v5.0.
To be added.
To be added.
Supported since ESP-IDF v5.1.
Supported since ESP-IDF v5.1.
Latest ESP-IDF versions can prevent from downloading to, or even execute binaries on unsupported chips. ESP-IDF of versions v4.4.5+, v5.0.1+, v5.1 and above have both esptool download check and bootloader loading check against the chip revision. While ESP-IDF v4.3.5 has only esptool downloading check.
For earlier ESP-IDF versions without such checking, which is incompatible with the given chip revision, the chips running such versions will have unpredictable behavior.