[PRE-RELEASE LINEAGE 19.1] S6 Edge+ pre-release

This is the initial release for the S6 Edge+.
Note: I do not own an S6 Edge+, so if you have an issue please report bugs with relevant and detailed information.

A MINIMUM OF

• adb logcat -b all
• model number
• other relevant configuration

IS REQUIRED FOR ME TO HELP AT ALL. No debug info = no fixes. If you think a problem needs other information, don't hesitate to provide it.

To install you need the latest firmware and TWRP 3.7.0-9.0, which can be obtained here thanks to TripLr devs:
https://drive.google.com/drive/folders/1gAlPsZIkYM-XYWu-JWJCDgwJ-60h0Ss2

[LINEAGE-20.0] March 2024 Update

New Release for G920F and G925F!

Major changes since last release

• Synced with LineageOS sources
• ASB March 2024
• Official Lineage support for MicroG
• Swap to d2s RIL blobs, better compatability and call quality
• Build libfimg5x from old BSP
• Fix few kernel errors

Download via OTA or https://fakemanoan.github.io

Enjoy!

[LINEAGE 19.1] - March 2024 ASB

New release for 19.1 for G920 and G925F devices

Major changes since last release include:

• Synced LineageOS sources
• March 2024 ASB
• Official Lineage Support for MicroG
• Swapped to d2s RIL blobs, better call stability, less hacks
• Uprev live display to 2.1
• Initial SEPolicy (still permissive though)
• Some SafetyNet "Strong" device parameters spoofed
• Fix some kernel errors

Download via OTA or manually download via https://fakemanoan.github.io/

Enjoy!

[LINEAGE 19.1] - NOTE 5 PRERELEASE

This is the first release for the Galaxy Note 5.

If you have a note 5 give it a go. Let me know how it goes, how it feels, any bugs or quirks etc

Requires TWRP 3.7.0-9.0. If you have any issues, try updating to the latest firmware, and try again.

If you want to test SELinux enforcing on this ROM (I dont suggest doing this unless you know what you are doing), flash the boot image also provided. Please provide audit logs though if you do that.

As far as I know all functions of the device work, but your mileage may vary of course. Enjoy! :)

[Lineage 19.1] - Feb 2024 ASB

Major changes since last release:

• Synced with lineageos source
• ASB 2024
• Rebased kernel, much cleaner commit history
• Tweaked some mali values
• Enabled memfd for sealing
• Build camera 2.5 service
• Improved UI performance
• DT2W is more consistent
• Few more small backports
• Swap to non legacy wifi service
• Small 25mV undervolt on the clusters, i dont think this will cause issues
• Temporarily revert AOD changes
• Use S6 brightness nit mapping (we were using S7 one before)

I may have some note 5 and S6 Edge+ builds coming soon. With their 4GB of RAM, it may make sense to start A14 testing on them, but we'll see. Need to make some changes to the device tree for that to support building on them. Also this is the first OTA! Woo!

Gonna keep working on the kernel, bringing updates to it from 3.14 and 3.18 to further improve compatibility. Hopefully eventually I can get rid of the dirty mm hack soon, I hope!

[Lineage 20] - January 2024 ASB for S6/S6E

Major changes since last release:

• Sync with LineageOS sources
• Merged Jan 2024 ASB
• Build HWC services
• Build HDMI instead of HDMI_dummy
• Fixed kernel build parameters
• Backport some decon changes from exynos 8890
• Backport some BTS features from exynos 8890
• Re-add DT2W (Although it is a bit buggy at this time)
• Fixed AOD not working
• Added OTA support. Please read the footnote regarding this
• Down rev to passthrough 2.1 composer for now as a test
• Move to 2048 xhdpi dalvik config. 4GB config was a bit too aggressive
• Set ZRAM size to a static 1.5GB
• Swap to more oreo blobs and fw files from A810S
• Fixed HEVC encoding
• small kernel updates

NOTE ABOUT OTA UPDATES

You NEED my TWRP or a recovery that supports OTAs if you want them. Currently, only my build of TWRP has OTA support built in, so is required.
You can get a copy here:
https://fakemanoan.github.io/downloads/twrp

You can still update the old way if you want with any recovery, that isnt changing. This is just for OTA support.

Still more kernel updates to be done, policies to be written for SELinux, but its looking pretty good now.

[Lineage 19.1] - January 2024 build

You didn't think I forgot about 12, right?

Major changes since last release:

• Synced with LineageOS sources
• Jan 2024 security updates
• Swap to a temporary kernel for now
• Correct kernel offsets
• Initial VDSO32 support
• Disabled exynos memory compression
• Disabled slow mode
• Swapped to r22p0 oreo driver
• Improved graphics performance
• Backport some changes from 8890 kernel
• Tweaked CPU boosting behaviour
• Low RAM optimizations
• Better utilise our 3GB of RAM for apps
• Updated HWC implementation
• Update cpusets
• Override build fingerprints
• Move to prebuilt secnativefeature
• Update some blobs to oreo
• Misc changes
• Clean up samsungexynos7420 sources
• Add lineage 20 health - battery limit backported + bypass power mode
• Build libfimg from old bsp
• Add OTA support
• Fixed SCRCPY and similar apps
• More granular control for volume
• Fixed AOD not working
• Added DT2W

Large update, which is a culmination of all previous LOS 20 additions, plus some extra stuff.
I understand people value 12 more than 13, because encryption works, network traffic monitoring works, etc. Pretty nice release so hope you like it.

Consider donating to support the project @ https://ko-fi.com/fakemanoan

[Lineage 19.1] - September 2023 update

Major changes since last release:

• Synced with lineageos sources
• September 2023 ASB merged
• Revert kernel changes from last build
• Fix edge build not installing for people, small error on my part
• dimens updated
• New installs now have a default device name. ie Galaxy S6, or Galaxy S6 Edge
• Tree cleanup
• Camera2 API regression should be resolved
• BT audio in calls improved? (need testers!)
• Reverted headphone gain change (too limiting)

TODO:
Fix DB performance (weird bug?)
r22p driver (need to test on Android 13 first)
SELinux enforcing
Misc audio issues
Build fingerprints + spoofing for safetynet

[KERNEL] - LOS 20.0 compatible UV kernel

This is a kernel with underclock and undervolt support for the CPU and GPU. Use hktweaks or mtweaks to undervolt (requires root)

Images are provided as is with no support due to the nature of undervolting. Select the correct image for your model and flash in TWRP.

Enjoy

[Lineage 20] September release 2 (for G920 and G925F)

Major changes since last release:

• Synced with LineageOS sources
• September 2023 ASB
• Fixed edge camera not working
• Changed default TCP scheduler to bic
• Enabled LCD doze mode
• Fingerprint when screen off should be fixed (ivan_meler credit)
• Swapped to camera 2.5 service

Things to do:
SELinux enforcing
Resolve some small audio issues
Fix some kernel memory management issues (maybe try update to 3.18 common kernel? long shot goal)