diff --git a/Utilities/Training/NRC_EPRI/README.md b/Utilities/Training/NRC_EPRI/README.md
new file mode 100644
index 00000000000..6ec0772ab0f
--- /dev/null
+++ b/Utilities/Training/NRC_EPRI/README.md
@@ -0,0 +1,4 @@
+# FDS Input Files Fault Simulations
+
+The directory called `FDS_Input_Files` contains the FDS input files for training simulations discussed in the U.S. Nuclear Regulatory Commission guidance document, "Nuclear Power Plant Fire Modeling Analysis Guidelines (NPP FIRE MAG) — Final Report", [NUREG-1934](https://www.nrc.gov/reading-rm/doc-collections/nuregs/staff/sr1934/index.html).
+
diff --git a/Utilities/Training/PRISME/README.md b/Utilities/Training/PRISME/README.md
new file mode 100644
index 00000000000..49f0d144abb
--- /dev/null
+++ b/Utilities/Training/PRISME/README.md
@@ -0,0 +1,5 @@
+# FDS Input Files for the PRISME Project
+
+This directory contains FDS input files for simulations of various PRISME fire scenarios. PRISME is an OECD/NEA joint international research project on the topic of fire propagation. The PRISME project (PRISME is the French acronym for "Fire Propagation in Elementary Multi-Room Scenarios") is a fire model validation exercise proposed by IRSN in France. The three major research areas addressed by the PRISME project included: propagation of heat and smoke from the fire room to adjacent rooms, impact of heat and smoke on safety critical systems and the impact of the ventilation network on limiting heat and smoke propagation.
+
+
diff --git a/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_2x2x2.fds b/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_2x2x2.fds
deleted file mode 100644
index 9f75eaac81c..00000000000
--- a/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_2x2x2.fds
+++ /dev/null
@@ -1,92 +0,0 @@
-&HEAD CHID='Group_A_2x2x2', TITLE='UL Group A Plastic Calorimetry Test' /
-
-&MESH IJK=35,35,80, XB=-1.50,3.75,-1.50,3.75,0.00,12.00 /
-&TIME T_END=300. /
-
-
-
-&REAC FUEL         = 'POLYSTYRENE', RADIATIVE_FRACTION=0.5
-      FYI        = 'Styrene, C_8 H_8'
-      H          = 8.
-      C          = 8.
-      HEAT_OF_COMBUSTION=40000.
-      SOOT_YIELD = 0.164
-      CO_YIELD   = 0.06 /
-
-&MATL ID                    = 'CONCRETE'
-      FYI                   = 'Drysdale, Intro to Fire Dynamics'
-      DENSITY               = 2300.
-      CONDUCTIVITY          = 0.10
-      SPECIFIC_HEAT         = 0.88 /
-
-&MATL ID                    = 'YELLOW PINE'
-      FYI                   = 'Drysdale, Intro to Fire Dynamics'
-      DENSITY               = 640.
-      CONDUCTIVITY          = 0.14
-      SPECIFIC_HEAT         = 2.85 
-      HEAT_OF_COMBUSTION    = 15000. /
-
-&MATL ID                    = 'CORRUGATED PAPER'
-      DENSITY               = 200.
-      CONDUCTIVITY          = 0.1
-      SPECIFIC_HEAT         = 1.5
-      HEAT_OF_COMBUSTION    = 11500.
-      EMISSIVITY            = 0.8 /
-
-&SURF ID                    = 'PLASTIC A'
-      FYI                   = 'FMRC Standard Plastic Commodity'
-      COLOR                 = 'TAN'
-      HRRPUA                = 500.
-      IGNITION_TEMPERATURE  = 370.
-      RAMP_Q                = 'GAP'
-      MATL_ID               = 'CORRUGATED PAPER'
-      BURN_AWAY             = .TRUE.
-      THICKNESS             = 0.005
-      E_COEFFICIENT         =  0.5 /
-&RAMP ID='GAP',T=   0.0,F=0.0 /
-&RAMP ID='GAP',T=   1.0,F=0.6 /
-&RAMP ID='GAP',T=  30.0,F=0.2 /
-&RAMP ID='GAP',T=  80.0,F=1.6 /
-&RAMP ID='GAP',T= 100.0,F=1.0 /
-
-&SURF ID                    = 'PALLET'
-      MATL_ID               = 'YELLOW PINE'
-      COLOR                 = 'BROWN' 
-      THICKNESS             = 0.012 /
-
-&SURF ID                    = 'FLOOR'
-      MATL_ID               = 'CONCRETE'
-      COLOR                 = 'GRAY 60' 
-      THICKNESS             = 0.2 /
-
-&SURF ID='IGNITOR', HRRPUA=1000., TAU_Q=60., COLOR='RED' /
-
-&MULT ID='pallet spacing', DX=1.20, DY=1.20, DZ=1.50, I_UPPER=1, J_UPPER=1, K_UPPER=1 /
-
-&OBST XB= 0.00, 1.05, 0.00, 1.05,  .15, 1.20, SURF_ID='PLASTIC A', OVERLAY=.FALSE., BULK_DENSITY=43.7, MULT_ID='pallet spacing'  /
-
-&OBST XB= 0.00, 1.05, 0.00, 0.15, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.30, 0.45, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.60, 0.75, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.90, 1.05, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.00, 1.05, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.30, 0.45, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.60, 0.75, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.90, 1.05, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 0.02, 0.00, 1.05, 0.00, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 1.03, 1.05, 0.00, 1.05, 0.00, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-
-&OBST XB= 1.05, 1.20, 0.45, 0.60, 0.00, 0.15, SURF_IDS='IGNITOR','PALLET','PALLET' /
-
-&VENT MB='XMAX', SURF_ID='OPEN' /
-&VENT MB='XMIN', SURF_ID='OPEN' /
-&VENT MB='YMAX', SURF_ID='OPEN' /
-&VENT MB='YMIN', SURF_ID='OPEN' /
-&VENT MB='ZMIN', SURF_ID='FLOOR' /
-&VENT MB='ZMAX', SURF_ID='OPEN' /
-
-
-
-
-
-&TAIL /
diff --git a/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_2x2x3.fds b/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_2x2x3.fds
deleted file mode 100644
index a33440a4a01..00000000000
--- a/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_2x2x3.fds
+++ /dev/null
@@ -1,92 +0,0 @@
-&HEAD CHID='Group_A_2x2x3', TITLE='UL Group A Plastic Calorimetry Test' /
-
-&MESH IJK=35,35,120, XB=-1.50,3.75,-1.50,3.75,0.00,18.00 /
-&TIME T_END=300. /
-
-
-
-&REAC FUEL         = 'POLYSTYRENE', RADIATIVE_FRACTION=0.5
-      FYI        = 'Styrene, C_8 H_8'
-      H          = 8.
-      C          = 8.
-      HEAT_OF_COMBUSTION=40000.
-      SOOT_YIELD = 0.164
-      CO_YIELD   = 0.06 /
-
-&MATL ID                    = 'CONCRETE'
-      FYI                   = 'Drysdale, Intro to Fire Dynamics'
-      DENSITY               = 2300.
-      CONDUCTIVITY          = 0.10
-      SPECIFIC_HEAT         = 0.88 /
-
-&MATL ID                    = 'YELLOW PINE'
-      FYI                   = 'Drysdale, Intro to Fire Dynamics'
-      DENSITY               = 640.
-      CONDUCTIVITY          = 0.14
-      SPECIFIC_HEAT         = 2.85 
-      HEAT_OF_COMBUSTION    = 15000. /
-
-&MATL ID                    = 'CORRUGATED PAPER'
-      DENSITY               = 200.
-      CONDUCTIVITY          = 0.1
-      SPECIFIC_HEAT         = 1.5
-      HEAT_OF_COMBUSTION    = 11500.
-      EMISSIVITY            = 0.8 /
-
-&SURF ID                    = 'PLASTIC A'
-      FYI                   = 'FMRC Standard Plastic Commodity'
-      COLOR                 = 'TAN'
-      HRRPUA                = 500.
-      IGNITION_TEMPERATURE  = 370.
-      RAMP_Q                = 'GAP'
-      MATL_ID               = 'CORRUGATED PAPER'
-      BURN_AWAY             = .TRUE.
-      THICKNESS             = 0.005
-      E_COEFFICIENT         =  0.5 /
-&RAMP ID='GAP',T=   0.0,F=0.0 /
-&RAMP ID='GAP',T=   1.0,F=0.6 /
-&RAMP ID='GAP',T=  30.0,F=0.2 /
-&RAMP ID='GAP',T=  80.0,F=1.6 /
-&RAMP ID='GAP',T= 100.0,F=1.0 /
-
-&SURF ID                    = 'PALLET'
-      MATL_ID               = 'YELLOW PINE'
-      COLOR                 = 'BROWN' 
-      THICKNESS             = 0.012 /
-
-&SURF ID                    = 'FLOOR'
-      MATL_ID               = 'CONCRETE'
-      COLOR                 = 'GRAY 60' 
-      THICKNESS             = 0.2 /
-
-&SURF ID='IGNITOR', HRRPUA=1000., TAU_Q=60., COLOR='RED' /
-
-&MULT ID='pallet spacing', DX=1.20, DY=1.20, DZ=1.50, I_UPPER=1, J_UPPER=1, K_UPPER=2 /
-
-&OBST XB= 0.00, 1.05, 0.00, 1.05,  .15, 1.20, SURF_ID='PLASTIC A', OVERLAY=.FALSE., BULK_DENSITY=43.7, MULT_ID='pallet spacing'  /
-
-&OBST XB= 0.00, 1.05, 0.00, 0.15, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.30, 0.45, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.60, 0.75, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.90, 1.05, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.00, 1.05, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.30, 0.45, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.60, 0.75, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.90, 1.05, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 0.02, 0.00, 1.05, 0.00, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 1.03, 1.05, 0.00, 1.05, 0.00, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-
-&OBST XB= 1.05, 1.20, 0.45, 0.60, 0.00, 0.15, SURF_IDS='IGNITOR','PALLET','PALLET' /
-
-&VENT MB='XMAX', SURF_ID='OPEN' /
-&VENT MB='XMIN', SURF_ID='OPEN' /
-&VENT MB='YMAX', SURF_ID='OPEN' /
-&VENT MB='YMIN', SURF_ID='OPEN' /
-&VENT MB='ZMIN', SURF_ID='FLOOR' /
-&VENT MB='ZMAX', SURF_ID='OPEN' /
-
-
-
-
-
-&TAIL /
diff --git a/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_2x2x4.fds b/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_2x2x4.fds
deleted file mode 100644
index 5a07c1ee82b..00000000000
--- a/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_2x2x4.fds
+++ /dev/null
@@ -1,92 +0,0 @@
-&HEAD CHID='Group_A_2x2x4', TITLE='UL Group A Plastic Calorimetry Test' /
-
-&MESH IJK=35,35,160, XB=-1.50,3.75,-1.50,3.75,0.00,24.00 /
-&TIME T_END=300. /
-
-
-
-&REAC FUEL         = 'POLYSTYRENE', RADIATIVE_FRACTION=0.5
-      FYI        = 'Styrene, C_8 H_8'
-      H          = 8.
-      C          = 8.
-      HEAT_OF_COMBUSTION=40000.
-      SOOT_YIELD = 0.164
-      CO_YIELD   = 0.06 /
-
-&MATL ID                    = 'CONCRETE'
-      FYI                   = 'Drysdale, Intro to Fire Dynamics'
-      DENSITY               = 2300.
-      CONDUCTIVITY          = 0.10
-      SPECIFIC_HEAT         = 0.88 /
-
-&MATL ID                    = 'YELLOW PINE'
-      FYI                   = 'Drysdale, Intro to Fire Dynamics'
-      DENSITY               = 640.
-      CONDUCTIVITY          = 0.14
-      SPECIFIC_HEAT         = 2.85 
-      HEAT_OF_COMBUSTION    = 15000. /
-
-&MATL ID                    = 'CORRUGATED PAPER'
-      DENSITY               = 200.
-      CONDUCTIVITY          = 0.1
-      SPECIFIC_HEAT         = 1.5
-      HEAT_OF_COMBUSTION    = 11500.
-      EMISSIVITY            = 0.8 /
-
-&SURF ID                    = 'PLASTIC A'
-      FYI                   = 'FMRC Standard Plastic Commodity'
-      COLOR                 = 'TAN'
-      HRRPUA                = 500.
-      IGNITION_TEMPERATURE  = 370.
-      RAMP_Q                = 'GAP'
-      MATL_ID               = 'CORRUGATED PAPER'
-      BURN_AWAY             = .TRUE.
-      THICKNESS             = 0.005
-      E_COEFFICIENT         =  0.5 /
-&RAMP ID='GAP',T=   0.0,F=0.0 /
-&RAMP ID='GAP',T=   1.0,F=0.6 /
-&RAMP ID='GAP',T=  30.0,F=0.2 /
-&RAMP ID='GAP',T=  80.0,F=1.6 /
-&RAMP ID='GAP',T= 100.0,F=1.0 /
-
-&SURF ID                    = 'PALLET'
-      MATL_ID               = 'YELLOW PINE'
-      COLOR                 = 'BROWN' 
-      THICKNESS             = 0.012 /
-
-&SURF ID                    = 'FLOOR'
-      MATL_ID               = 'CONCRETE'
-      COLOR                 = 'GRAY 60' 
-      THICKNESS             = 0.2 /
-
-&SURF ID='IGNITOR', HRRPUA=1000., TAU_Q=60., COLOR='RED' /
-
-&MULT ID='pallet spacing', DX=1.20, DY=1.20, DZ=1.50, I_UPPER=1, J_UPPER=1, K_UPPER=3 /
-
-&OBST XB= 0.00, 1.05, 0.00, 1.05,  .15, 1.20, SURF_ID='PLASTIC A', OVERLAY=.FALSE., BULK_DENSITY=43.7, MULT_ID='pallet spacing'  /
-
-&OBST XB= 0.00, 1.05, 0.00, 0.15, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.30, 0.45, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.60, 0.75, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.90, 1.05, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.00, 1.05, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.30, 0.45, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.60, 0.75, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.90, 1.05, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 0.02, 0.00, 1.05, 0.00, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 1.03, 1.05, 0.00, 1.05, 0.00, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-
-&OBST XB= 1.05, 1.20, 0.45, 0.60, 0.00, 0.15, SURF_IDS='IGNITOR','PALLET','PALLET' /
-
-&VENT MB='XMAX', SURF_ID='OPEN' /
-&VENT MB='XMIN', SURF_ID='OPEN' /
-&VENT MB='YMAX', SURF_ID='OPEN' /
-&VENT MB='YMIN', SURF_ID='OPEN' /
-&VENT MB='ZMIN', SURF_ID='FLOOR' /
-&VENT MB='ZMAX', SURF_ID='OPEN' /
-
-
-
-
-
-&TAIL /
diff --git a/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_FM_RDD_p21.fds b/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_FM_RDD_p21.fds
deleted file mode 100644
index 8498b454322..00000000000
--- a/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_FM_RDD_p21.fds
+++ /dev/null
@@ -1,124 +0,0 @@
-&HEAD CHID='Group_A_FM_RDD_p21', TITLE='FM Group A Plastic RDD Test' /
-
-&MESH IJK=35,35,40, XB=-1.50,3.75,-1.50,3.75,0.00,6.00 /
-&TIME T_END=900. /
-
-&MISC ALLOW_UNDERSIDE_PARTICLES=.TRUE. /
-
-
-
-&SPEC ID='WATER VAPOR' /
-
-&PART ID='water drops', SPEC_ID='WATER VAPOR', DIAMETER=1000., SAMPLING_FACTOR=10 /
-
-&PROP ID='nozzle', PART_ID='water drops', FLOW_RATE=3.2, PARTICLES_PER_SECOND=500, PARTICLE_VELOCITY=1., SPRAY_ANGLE=0.,35., SMOKEVIEW_ID='nozzle'  /
-
-&DEVC XYZ=0.225,0.225,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.825,0.225,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=1.425,0.225,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=2.025,0.225,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.225,0.825,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.825,0.825,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=1.425,0.825,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=2.025,0.825,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.225,1.425,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.825,1.425,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=1.425,1.425,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=2.025,1.425,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.225,2.025,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.825,2.025,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=1.425,2.025,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=2.025,2.025,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-
-&REAC FUEL         = 'POLYSTYRENE', RADIATIVE_FRACTION=0.5
-      FYI        = 'Styrene, C_8 H_8'
-      H          = 8.
-      C          = 8.
-      HEAT_OF_COMBUSTION=40000.
-      SOOT_YIELD = 0.164
-      CO_YIELD   = 0.06 /
-
-&MATL ID                    = 'CONCRETE'
-      FYI                   = 'Drysdale, Intro to Fire Dynamics'
-      DENSITY               = 2300.
-      CONDUCTIVITY          = 0.10
-      SPECIFIC_HEAT         = 0.88 /
-
-&MATL ID                    = 'YELLOW PINE'
-      FYI                   = 'Drysdale, Intro to Fire Dynamics'
-      DENSITY               = 640.
-      CONDUCTIVITY          = 0.14
-      SPECIFIC_HEAT         = 2.85 
-      HEAT_OF_COMBUSTION    = 15000. /
-
-&MATL ID                    = 'CORRUGATED PAPER'
-      DENSITY               = 200.
-      CONDUCTIVITY          = 0.1
-      SPECIFIC_HEAT         = 1.5
-      HEAT_OF_COMBUSTION    = 11500.
-      EMISSIVITY            = 0.8 /
-
-&SURF ID                    = 'PLASTIC A'
-      FYI                   = 'FMRC Standard Plastic Commodity'
-      COLOR                 = 'TAN'
-      HRRPUA                = 500.
-      IGNITION_TEMPERATURE  = 370.
-      RAMP_Q                = 'GAP'
-      MATL_ID               = 'CORRUGATED PAPER'
-      BURN_AWAY             = .TRUE.
-      THICKNESS             = 0.005
-      E_COEFFICIENT         =  0.5 /
-&RAMP ID='GAP',T=   0.0,F=0.0 /
-&RAMP ID='GAP',T=   1.0,F=0.6 /
-&RAMP ID='GAP',T=  30.0,F=0.2 /
-&RAMP ID='GAP',T=  80.0,F=1.6 /
-&RAMP ID='GAP',T= 100.0,F=1.0 /
-
-&SURF ID                    = 'PALLET'
-      MATL_ID               = 'YELLOW PINE'
-      COLOR                 = 'BROWN' 
-      THICKNESS             = 0.012 /
-
-&SURF ID                    = 'FLOOR'
-      MATL_ID               = 'CONCRETE'
-      COLOR                 = 'GRAY 60' 
-      THICKNESS             = 0.2 /
-
-&MULT ID='pallet spacing', DX=1.20, DY=1.20, DZ0=0.45, DZ=1.50, I_UPPER=1, J_UPPER=1, K_UPPER=1 /
-
-&OBST XB= 0.00, 1.05, 0.00, 1.05,  .15, 1.20, SURF_ID='PLASTIC A', OVERLAY=.FALSE., BULK_DENSITY=43.7, MULT_ID='pallet spacing'  /
-
-&OBST XB= 0.00, 1.05, 0.00, 0.15, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.30, 0.45, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.60, 0.75, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.90, 1.05, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.00, 1.05, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.30, 0.45, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.60, 0.75, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.90, 1.05, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 0.02, 0.00, 1.05, 0.00, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 1.03, 1.05, 0.00, 1.05, 0.00, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-
-&PART ID='ignitor particle', SURF_ID='ignitor', SAMPLING_FACTOR=1, STATIC=.TRUE., AGE=10. /
-&SURF ID='ignitor', TMP_FRONT=1500., GEOMETRY='CYLINDRICAL', COLOR='RED', LENGTH=0.15, RADIUS=0.01 /
-&INIT XYZ=0.95,1.10,0.65, PART_ID='ignitor particle', N_PARTICLES=1 /
-&INIT XYZ=1.10,1.25,0.65, PART_ID='ignitor particle', N_PARTICLES=1 /
-&INIT XYZ=1.25,1.15,0.65, PART_ID='ignitor particle', N_PARTICLES=1 /
-&INIT XYZ=1.15,0.95,0.65, PART_ID='ignitor particle', N_PARTICLES=1 /
-
-&OBST XB= -.15, 2.40, -.15, 2.40, 0.00, 0.30, SURF_ID='FLOOR' / Platform
-
-&VENT MB='XMAX', SURF_ID='OPEN' /
-&VENT MB='XMIN', SURF_ID='OPEN' /
-&VENT MB='YMAX', SURF_ID='OPEN' /
-&VENT MB='YMIN', SURF_ID='OPEN' /
-&VENT MB='ZMIN', SURF_ID='FLOOR' /
-&VENT MB='ZMAX', SURF_ID='OPEN' /
-
-
-&BNDF QUANTITY='BURNING RATE' /
-&BNDF QUANTITY='WALL TEMPERATURE' /
-&BNDF QUANTITY='MPUA', PART_ID='water drops' /
-&BNDF QUANTITY='CPUA', PART_ID='water drops' /
-
-&TAIL /
diff --git a/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_FM_RDD_p31.fds b/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_FM_RDD_p31.fds
deleted file mode 100644
index 697fee8c33d..00000000000
--- a/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_FM_RDD_p31.fds
+++ /dev/null
@@ -1,124 +0,0 @@
-&HEAD CHID='Group_A_FM_RDD_p31', TITLE='FM Group A Plastic RDD Test' /
-
-&MESH IJK=35,35,40, XB=-1.50,3.75,-1.50,3.75,0.00,6.00 /
-&TIME T_END=900. /
-
-&MISC ALLOW_UNDERSIDE_PARTICLES=.TRUE. /
-
-
-
-&SPEC ID='WATER VAPOR' /
-
-&PART ID='water drops', SPEC_ID='WATER VAPOR', DIAMETER=1000., SAMPLING_FACTOR=10 /
-
-&PROP ID='nozzle', PART_ID='water drops', FLOW_RATE=4.7, PARTICLES_PER_SECOND=500, PARTICLE_VELOCITY=1., SPRAY_ANGLE=0.,35., SMOKEVIEW_ID='nozzle'  /
-
-&DEVC XYZ=0.225,0.225,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.825,0.225,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=1.425,0.225,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=2.025,0.225,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.225,0.825,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.825,0.825,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=1.425,0.825,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=2.025,0.825,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.225,1.425,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.825,1.425,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=1.425,1.425,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=2.025,1.425,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.225,2.025,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.825,2.025,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=1.425,2.025,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=2.025,2.025,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-
-&REAC FUEL         = 'POLYSTYRENE', RADIATIVE_FRACTION=0.5
-      FYI        = 'Styrene, C_8 H_8'
-      H          = 8.
-      C          = 8.
-      HEAT_OF_COMBUSTION=40000.
-      SOOT_YIELD = 0.164
-      CO_YIELD   = 0.06 /
-
-&MATL ID                    = 'CONCRETE'
-      FYI                   = 'Drysdale, Intro to Fire Dynamics'
-      DENSITY               = 2300.
-      CONDUCTIVITY          = 0.10
-      SPECIFIC_HEAT         = 0.88 /
-
-&MATL ID                    = 'YELLOW PINE'
-      FYI                   = 'Drysdale, Intro to Fire Dynamics'
-      DENSITY               = 640.
-      CONDUCTIVITY          = 0.14
-      SPECIFIC_HEAT         = 2.85 
-      HEAT_OF_COMBUSTION    = 15000. /
-
-&MATL ID                    = 'CORRUGATED PAPER'
-      DENSITY               = 200.
-      CONDUCTIVITY          = 0.1
-      SPECIFIC_HEAT         = 1.5
-      HEAT_OF_COMBUSTION    = 11500.
-      EMISSIVITY            = 0.8 /
-
-&SURF ID                    = 'PLASTIC A'
-      FYI                   = 'FMRC Standard Plastic Commodity'
-      COLOR                 = 'TAN'
-      HRRPUA                = 500.
-      IGNITION_TEMPERATURE  = 370.
-      RAMP_Q                = 'GAP'
-      MATL_ID               = 'CORRUGATED PAPER'
-      BURN_AWAY             = .TRUE.
-      THICKNESS             = 0.005
-      E_COEFFICIENT         =  0.5 /
-&RAMP ID='GAP',T=   0.0,F=0.0 /
-&RAMP ID='GAP',T=   1.0,F=0.6 /
-&RAMP ID='GAP',T=  30.0,F=0.2 /
-&RAMP ID='GAP',T=  80.0,F=1.6 /
-&RAMP ID='GAP',T= 100.0,F=1.0 /
-
-&SURF ID                    = 'PALLET'
-      MATL_ID               = 'YELLOW PINE'
-      COLOR                 = 'BROWN' 
-      THICKNESS             = 0.012 /
-
-&SURF ID                    = 'FLOOR'
-      MATL_ID               = 'CONCRETE'
-      COLOR                 = 'GRAY 60' 
-      THICKNESS             = 0.2 /
-
-&MULT ID='pallet spacing', DX=1.20, DY=1.20, DZ0=0.45, DZ=1.50, I_UPPER=1, J_UPPER=1, K_UPPER=1 /
-
-&OBST XB= 0.00, 1.05, 0.00, 1.05,  .15, 1.20, SURF_ID='PLASTIC A', OVERLAY=.FALSE., BULK_DENSITY=43.7, MULT_ID='pallet spacing'  /
-
-&OBST XB= 0.00, 1.05, 0.00, 0.15, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.30, 0.45, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.60, 0.75, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.90, 1.05, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.00, 1.05, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.30, 0.45, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.60, 0.75, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.90, 1.05, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 0.02, 0.00, 1.05, 0.00, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 1.03, 1.05, 0.00, 1.05, 0.00, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-
-&PART ID='ignitor particle', SURF_ID='ignitor', SAMPLING_FACTOR=1, STATIC=.TRUE., AGE=10. /
-&SURF ID='ignitor', TMP_FRONT=1500., GEOMETRY='CYLINDRICAL', COLOR='RED', LENGTH=0.15, RADIUS=0.01 /
-&INIT XYZ=0.95,1.10,0.65, PART_ID='ignitor particle', N_PARTICLES=1 /
-&INIT XYZ=1.10,1.25,0.65, PART_ID='ignitor particle', N_PARTICLES=1 /
-&INIT XYZ=1.25,1.15,0.65, PART_ID='ignitor particle', N_PARTICLES=1 /
-&INIT XYZ=1.15,0.95,0.65, PART_ID='ignitor particle', N_PARTICLES=1 /
-
-&OBST XB= -.15, 2.40, -.15, 2.40, 0.00, 0.30, SURF_ID='FLOOR' / Platform
-
-&VENT MB='XMAX', SURF_ID='OPEN' /
-&VENT MB='XMIN', SURF_ID='OPEN' /
-&VENT MB='YMAX', SURF_ID='OPEN' /
-&VENT MB='YMIN', SURF_ID='OPEN' /
-&VENT MB='ZMIN', SURF_ID='FLOOR' /
-&VENT MB='ZMAX', SURF_ID='OPEN' /
-
-
-&BNDF QUANTITY='BURNING RATE' /
-&BNDF QUANTITY='WALL TEMPERATURE' /
-&BNDF QUANTITY='MPUA', PART_ID='water drops' /
-&BNDF QUANTITY='CPUA', PART_ID='water drops' /
-
-&TAIL /
diff --git a/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_FM_RDD_p39.fds b/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_FM_RDD_p39.fds
deleted file mode 100644
index 8891c126ddf..00000000000
--- a/Utilities/Training/UL_Commodity/FDS_Input_Files/Group_A_FM_RDD_p39.fds
+++ /dev/null
@@ -1,124 +0,0 @@
-&HEAD CHID='Group_A_FM_RDD_p39', TITLE='FM Group A Plastic RDD Test' /
-
-&MESH IJK=35,35,40, XB=-1.50,3.75,-1.50,3.75,0.00,6.00 /
-&TIME T_END=900. /
-
-&MISC ALLOW_UNDERSIDE_PARTICLES=.TRUE. /
-
-
-
-&SPEC ID='WATER VAPOR' /
-
-&PART ID='water drops', SPEC_ID='WATER VAPOR', DIAMETER=1000., SAMPLING_FACTOR=10 /
-
-&PROP ID='nozzle', PART_ID='water drops', FLOW_RATE=5.9, PARTICLES_PER_SECOND=500, PARTICLE_VELOCITY=1., SPRAY_ANGLE=0.,35., SMOKEVIEW_ID='nozzle'  /
-
-&DEVC XYZ=0.225,0.225,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.825,0.225,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=1.425,0.225,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=2.025,0.225,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.225,0.825,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.825,0.825,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=1.425,0.825,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=2.025,0.825,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.225,1.425,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.825,1.425,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=1.425,1.425,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=2.025,1.425,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.225,2.025,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=0.825,2.025,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=1.425,2.025,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-&DEVC XYZ=2.025,2.025,3.30, PROP_ID='nozzle', QUANTITY='TIME', SETPOINT=83.0, ID='noz_1' /
-
-&REAC FUEL         = 'POLYSTYRENE', RADIATIVE_FRACTION=0.5
-      FYI        = 'Styrene, C_8 H_8'
-      H          = 8.
-      C          = 8.
-      HEAT_OF_COMBUSTION=40000.
-      SOOT_YIELD = 0.164
-      CO_YIELD   = 0.06 /
-
-&MATL ID                    = 'CONCRETE'
-      FYI                   = 'Drysdale, Intro to Fire Dynamics'
-      DENSITY               = 2300.
-      CONDUCTIVITY          = 0.10
-      SPECIFIC_HEAT         = 0.88 /
-
-&MATL ID                    = 'YELLOW PINE'
-      FYI                   = 'Drysdale, Intro to Fire Dynamics'
-      DENSITY               = 640.
-      CONDUCTIVITY          = 0.14
-      SPECIFIC_HEAT         = 2.85 
-      HEAT_OF_COMBUSTION    = 15000. /
-
-&MATL ID                    = 'CORRUGATED PAPER'
-      DENSITY               = 200.
-      CONDUCTIVITY          = 0.1
-      SPECIFIC_HEAT         = 1.5
-      HEAT_OF_COMBUSTION    = 11500.
-      EMISSIVITY            = 0.8 /
-
-&SURF ID                    = 'PLASTIC A'
-      FYI                   = 'FMRC Standard Plastic Commodity'
-      COLOR                 = 'TAN'
-      HRRPUA                = 500.
-      IGNITION_TEMPERATURE  = 370.
-      RAMP_Q                = 'GAP'
-      MATL_ID               = 'CORRUGATED PAPER'
-      BURN_AWAY             = .TRUE.
-      THICKNESS             = 0.005
-      E_COEFFICIENT         =  0.5 /
-&RAMP ID='GAP',T=   0.0,F=0.0 /
-&RAMP ID='GAP',T=   1.0,F=0.6 /
-&RAMP ID='GAP',T=  30.0,F=0.2 /
-&RAMP ID='GAP',T=  80.0,F=1.6 /
-&RAMP ID='GAP',T= 100.0,F=1.0 /
-
-&SURF ID                    = 'PALLET'
-      MATL_ID               = 'YELLOW PINE'
-      COLOR                 = 'BROWN' 
-      THICKNESS             = 0.012 /
-
-&SURF ID                    = 'FLOOR'
-      MATL_ID               = 'CONCRETE'
-      COLOR                 = 'GRAY 60' 
-      THICKNESS             = 0.2 /
-
-&MULT ID='pallet spacing', DX=1.20, DY=1.20, DZ0=0.45, DZ=1.50, I_UPPER=1, J_UPPER=1, K_UPPER=1 /
-
-&OBST XB= 0.00, 1.05, 0.00, 1.05,  .15, 1.20, SURF_ID='PLASTIC A', OVERLAY=.FALSE., BULK_DENSITY=43.7, MULT_ID='pallet spacing'  /
-
-&OBST XB= 0.00, 1.05, 0.00, 0.15, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.30, 0.45, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.60, 0.75, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.90, 1.05, 0.00, 0.02, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 1.05, 0.00, 1.05, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.30, 0.45, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.60, 0.75, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
- OBST XB= 0.00, 1.05, 0.90, 1.05, 0.13, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 0.00, 0.02, 0.00, 1.05, 0.00, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-&OBST XB= 1.03, 1.05, 0.00, 1.05, 0.00, 0.15, SURF_ID='PALLET', MULT_ID='pallet spacing'  /
-
-&PART ID='ignitor particle', SURF_ID='ignitor', SAMPLING_FACTOR=1, STATIC=.TRUE., AGE=10., AGE=10. /
-&SURF ID='ignitor', TMP_FRONT=1500., GEOMETRY='CYLINDRICAL', COLOR='RED', LENGTH=0.15, RADIUS=0.01 /
-&INIT XYZ=0.95,1.10,0.65, PART_ID='ignitor particle', N_PARTICLES=1 /
-&INIT XYZ=1.10,1.25,0.65, PART_ID='ignitor particle', N_PARTICLES=1 /
-&INIT XYZ=1.25,1.15,0.65, PART_ID='ignitor particle', N_PARTICLES=1 /
-&INIT XYZ=1.15,0.95,0.65, PART_ID='ignitor particle', N_PARTICLES=1 /
-
-&OBST XB= -.15, 2.40, -.15, 2.40, 0.00, 0.30, SURF_ID='FLOOR' / Platform
-
-&VENT MB='XMAX', SURF_ID='OPEN' /
-&VENT MB='XMIN', SURF_ID='OPEN' /
-&VENT MB='YMAX', SURF_ID='OPEN' /
-&VENT MB='YMIN', SURF_ID='OPEN' /
-&VENT MB='ZMIN', SURF_ID='FLOOR' /
-&VENT MB='ZMAX', SURF_ID='OPEN' /
-
-
-&BNDF QUANTITY='BURNING RATE' /
-&BNDF QUANTITY='WALL TEMPERATURE' /
-&BNDF QUANTITY='MPUA', PART_ID='water drops' /
-&BNDF QUANTITY='CPUA', PART_ID='water drops' /
-
-&TAIL /
diff --git a/Utilities/Training/UL_Commodity/Run_All.sh b/Utilities/Training/UL_Commodity/Run_All.sh
deleted file mode 100755
index 6cf093f7698..00000000000
--- a/Utilities/Training/UL_Commodity/Run_All.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/bash
-
-# This script runs a set of Validation Cases on a Linux machine with a batch queuing system.
-# See the file Validation/Common_Run_All.sh for more information.
-export SVNROOT=`pwd`/../../..
-source $SVNROOT/Validation/Common_Run_All.sh
-
-$QFDS $DEBUG $QUEUE -d $INDIR Group_A_2x2x2.fds
-$QFDS $DEBUG $QUEUE -d $INDIR Group_A_2x2x3.fds
-$QFDS $DEBUG $QUEUE -d $INDIR Group_A_2x2x4.fds
-$QFDS $DEBUG $QUEUE -d $INDIR Group_A_FM_RDD_p21.fds
-$QFDS $DEBUG $QUEUE -d $INDIR Group_A_FM_RDD_p31.fds
-$QFDS $DEBUG $QUEUE -d $INDIR Group_A_FM_RDD_p39.fds
-
-echo FDS cases submitted