Wrong meter value in lasted update

[leolionart]

JkBMS 2

This happen with all sensor in secondary battery. I have 2 jk bms and is fine with battery1 but battery2 is totally wrong

[fl4p]

Did you try to downgrade back to previous version?

likely related to this change: bd60195#diff-97837c4378411feea984b19a6c4ca5e9d1e75d8206310f58b619418f200d96ed

[Confushion]

I had the same issue coming up out of the blue in version 1.78
Seems the 4th byte of the cycle_capacity field ( buf[189] ) is set to 0x2 in my case.
Looks like this byte value is slowly increasing...

This change fixed the issue for me:
is_new_11fw = buf[189] in {0x0, 0x1, 0x2} and buf[189 + 32] > 0 # 32 cell version

[leolionart]

The problem in the latest version is displaying the wrong battery percentage. It went up to 160000. I had to roll back to version 1.79

[fl4p]

Hi, since version 1.81 you can manually set the jk version. either use type: jk_24s for an older model or jk_32s for a newer one. If you are unsure try either and see what works for you