fleet-and-orbit.yml

# This workflow tests orbit code changes (compiles orbit from source).
# It uses a fleet instance also built and executed from source.
#
# It tests that orbit osquery agents enroll successfully to Fleet.
name: Test Fleetctl Package, Orbit & Fleet

on:
  push:
    branches:
      - main
      - patch-*
      - prepare-*
    paths:
      - 'orbit/**.go'
      - '.github/workflows/fleet-and-orbit.yml'
  pull_request:
    paths:
      - 'orbit/**.go'
      - '.github/workflows/fleet-and-orbit.yml'
  workflow_dispatch: # Manual

# This allows a subsequently queued workflow run to interrupt previous runs
concurrency:
  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id}}
  cancel-in-progress: true

defaults:
  run:
    # fail-fast using bash -eo pipefail. See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#exit-codes-and-error-action-preference
    shell: bash

env:
  OSQUERY_VERSION: 5.9.1

permissions:
  contents: read

jobs:
  gen:
    runs-on: ubuntu-latest
    outputs:
      subdomain: ${{ steps.gen.outputs.subdomain }}
      domain: ${{ steps.gen.outputs.domain }}
      address: ${{ steps.gen.outputs.address }}
      enroll_secret: ${{ steps.gen.outputs.enroll_secret }}
    steps:
    - id: gen
      run: |
        UUID=$(uuidgen)
        echo "subdomain=fleet-test-$UUID" >> $GITHUB_OUTPUT
        echo "domain=fleet-test-$UUID.fleetuem.com" >> $GITHUB_OUTPUT
        echo "address=https://fleet-test-$UUID.fleetuem.com" >> $GITHUB_OUTPUT
        ENROLL=$(uuidgen)
        echo "enroll_secret=$ENROLL" >> $GITHUB_OUTPUT

  run-server:
    timeout-minutes: 60
    strategy:
      matrix:
        go-version: ['^1.21.1']
        mysql: ['mysql:5.7']
    runs-on: ubuntu-latest
    needs: gen
    steps:

    - name: Install Go
      uses: actions/setup-go@93397bea11091df50f3d7e59dc26a7711a8bcfbe # v4.1.0
      with:
        go-version: ${{ matrix.go-version }}

    - name: Checkout Code
      uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3

    - name: Start tunnel
      env:
        CERT_PEM: ${{ secrets.CLOUDFLARE_TUNNEL_FLEETUEM_CERT_B64 }}
      run: |
        # Increase maximum receive buffer size to roughly 2.5 MB.
        # Cloudflared uses quic-go. This buffer holds packets that have been received by the kernel,
        # but not yet read by the application (quic-go in this case). Once this buffer fills up, the
        # kernel will drop any new incoming packet.
        # See https://github.com/quic-go/quic-go/wiki/UDP-Receive-Buffer-Size.
        sudo sysctl -w net.core.rmem_max=2500000

        # Install cloudflared
        wget https://github.com/cloudflare/cloudflared/releases/latest/download/cloudflared-linux-amd64.deb
        sudo dpkg -i cloudflared-linux-amd64.deb
        # Add secret
        echo "$CERT_PEM" | base64 -d > cert.pem
        # Start tunnel
        cloudflared tunnel --origincert cert.pem --hostname ${{ needs.gen.outputs.subdomain }} --url http://localhost:1337 --name ${{ needs.gen.outputs.subdomain }} --logfile cloudflared.log &
        until [[ $(cloudflared tunnel --origincert cert.pem info -o json ${{ needs.gen.outputs.subdomain }} | jq '.conns[0].conns[0].is_pending_reconnect') = false ]]; do
          echo "Awaiting tunnel ready..."
          sleep 5
        done

    - name: Start Infra Dependencies
      run: FLEET_MYSQL_IMAGE=${{ matrix.mysql }} docker-compose up -d mysql redis &

    - name: Install JS Dependencies
      run: make deps-js

    - name: Generate and bundle go & js code
      run: make generate

    - name: Build fleet and fleetctl
      # fleet-dev builds fleet with "race" enabled.
      run: make fleet-dev fleetctl

    - name: Run Fleet server
      env:
        FLEET_OSQUERY_HOST_IDENTIFIER: instance # use instance identifier to allow for duplicate UUIDs
        FLEET_SERVER_ADDRESS: 0.0.0.0:1337
        FLEET_SERVER_TLS: false
        FLEET_LOGGING_DEBUG: true
      run: |
        mkdir ./fleet_log
        make db-reset
        ./build/fleet serve --dev --dev_license 1>./fleet_log/stdout.log 2>./fleet_log/stderr.log &
        ./build/fleetctl config set --address http://localhost:1337 --tls-skip-verify
        until ./build/fleetctl setup --email admin@example.com --name Admin --password preview1337# --org-name Example
        do
          echo "Retrying setup in 5s..."
          sleep 5
        done
        # Wait for all of the hosts to be enrolled
        EXPECTED=3
        until [ $(./build/fleetctl get hosts --json | grep "hostname" | wc -l | tee hostcount) -ge $EXPECTED ]; do
          echo -n "Waiting for hosts to enroll: "
          cat hostcount | xargs echo -n
          echo " / $EXPECTED"
          sleep 30
        done
        ./build/fleetctl get hosts
        ./build/fleetctl get hosts --json
        echo "Success! $EXPECTED hosts enrolled."

    - name: Cleanup tunnel
      if: always()
      run: cloudflared tunnel --origincert cert.pem delete --force ${{ needs.gen.outputs.subdomain }}

    - name: Upload fleet logs
      if: always()
      uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # v2
      with:
        name: fleet-logs
        path: |
          fleet_log

    - name: Upload cloudflared logs
      if: always()
      uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # v2
      with:
        name: cloudflared.log
        path: cloudflared.log

  # Sets the enroll secret of the Fleet server.
  #
  # This job also makes sure the Fleet server is up and running.
  set-enroll-secret:
    timeout-minutes: 60
    strategy:
      matrix:
        go-version: ['^1.21.1']
    runs-on: ubuntu-latest
    needs: gen
    steps:

    - name: Install Go
      uses: actions/setup-go@93397bea11091df50f3d7e59dc26a7711a8bcfbe # v4.1.0
      with:
        go-version: ${{ matrix.go-version }}

    - name: Checkout Code
      uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3

    - name: Build Fleetctl
      run: make fleetctl

    - id: enroll
      name: Set enroll secret
      run: |
        ./build/fleetctl config set --address ${{ needs.gen.outputs.address }}
        until ./build/fleetctl login --email admin@example.com --password preview1337#
        do
          echo "Retrying in 30s..."
          sleep 30
        done
        echo '---
        apiVersion: v1
        kind: enroll_secret
        spec:
          secrets:
          - secret: ${{ needs.gen.outputs.enroll_secret }}
        ' > secrets.yml
        ./build/fleetctl apply -f secrets.yml


  # Here we generate the Fleet Desktop and osqueryd targets for
  # macOS which can only be generated from a macOS host.
  build-macos-targets:
    strategy:
      matrix:
        go-version: ['^1.21.1']
    runs-on: macos-latest
    steps:

    - name: Install Go
      uses: actions/setup-go@93397bea11091df50f3d7e59dc26a7711a8bcfbe # v4.1.0
      with:
        go-version: ${{ matrix.go-version }}

    - name: Checkout Code
      uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3

    - name: Build desktop.app.tar.gz and osqueryd.app.tar.gz
      run: |
        make desktop-app-tar-gz
        make osqueryd-app-tar-gz version=$OSQUERY_VERSION out-path=.

    - name: Upload desktop.app.tar.gz and osqueryd.app.tar.gz
      uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # v2
      with:
        name: macos-pre-built-apps
        path: |
          desktop.app.tar.gz
          osqueryd.app.tar.gz


  # TODO(lucas): Currently, to simplify the workflow we do all in one job:
  # 1. Generate TUF repository (compile Orbit from source).
  # 2. Run TUF server on localhost.
  # 3. Generate packages using localhost TUF server.
  #
  # When installing the generated packages, Orbit will log "update errors"
  # because the TUF URL is set to http://localhost:8081.
  #
  # TODO(lucas): Test the generated RPM package on a CentOS docker image.
  #
  # We run this job in ubuntu because Github macOS runner doesn't have Docker
  # installed, and installing it is time consuming and unreliable.
  run-tuf-and-gen-pkgs:
    timeout-minutes: 60
    strategy:
      matrix:
        go-version: ['^1.21.1']
    runs-on: ubuntu-latest
    needs: [gen, build-macos-targets]
    steps:

    - name: Install Go
      uses: actions/setup-go@93397bea11091df50f3d7e59dc26a7711a8bcfbe # v4.1.0
      with:
        go-version: ${{ matrix.go-version }}

    - name: Checkout Code
      uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3

    - name: Download macos pre-built apps
      id: download
      uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 # v2
      with:
        name: macos-pre-built-apps

    - name: Build Repository and run TUF server
      env:
        SYSTEMS: "macos windows linux"
        PKG_FLEET_URL: ${{ needs.gen.outputs.address }}
        PKG_TUF_URL: http://localhost:8081
        DEB_FLEET_URL: ${{ needs.gen.outputs.address }}
        DEB_TUF_URL: http://localhost:8081
        RPM_FLEET_URL: ${{ needs.gen.outputs.address }}
        RPM_TUF_URL: http://localhost:8081
        MSI_FLEET_URL: ${{ needs.gen.outputs.address }}
        MSI_TUF_URL: http://localhost:8081
        ENROLL_SECRET: ${{ needs.gen.outputs.enroll_secret }}
        MACOS_USE_PREBUILT_DESKTOP_APP_TAR_GZ: 1
        MACOS_USE_PREBUILT_OSQUERYD_APP_TAR_GZ: 1
        GENERATE_PKG: 1
        GENERATE_DEB: 1
        GENERATE_RPM: 1
        GENERATE_MSI: 1
        FLEET_DESKTOP: 1
      run: |
        ./tools/tuf/test/main.sh

    - name: Upload PKG installer
      uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # v2
      with:
        name: fleet-osquery.pkg
        path: |
          fleet-osquery.pkg

    - name: Upload DEB installer
      uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # v2
      with:
        name: fleet-osquery_42.0.0_amd64.deb
        path: |
          fleet-osquery_42.0.0_amd64.deb

    - name: Upload MSI installer
      uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # v2
      with:
        name: fleet-osquery.msi
        path: |
          fleet-osquery.msi


  orbit-macos:
    timeout-minutes: 60
    runs-on: macos-latest
    needs: [gen, run-tuf-and-gen-pkgs]
    steps:

    - name: Checkout Code
      uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3

    - name: Download pkg
      id: download
      uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 # v2
      with:
        name: fleet-osquery.pkg

    - name: Install pkg
      run: |
        sudo hostname orbit-macos
        sudo installer -pkg ${{ steps.download.outputs.download-path }}/fleet-osquery.pkg -target /

    - name: Wait enroll
      run: |
        # Wait until fleet server goes down.
        while curl --fail ${{ needs.gen.outputs.address }};
        do
          echo "Retrying in 10s..."
          sleep 10
        done

    - name: Run orbit shell
      run:
        sudo orbit shell -- --json "select * from osquery_info;" | jq -e 'if (.[0]) then true else false end'

    - name: Collect orbit logs
      if: always()
      run: |
        mkdir orbit-logs
        sudo cp /var/log/orbit/* orbit-logs/

    - name: Upload orbit logs
      if: always()
      uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # v2
      with:
        name: orbit-logs
        path: |
          orbit-logs

    - name: Uninstall pkg
      run: |
        ./orbit/tools/cleanup/cleanup_macos.sh


  orbit-ubuntu:
    timeout-minutes: 60
    runs-on: ubuntu-latest
    needs: [gen, run-tuf-and-gen-pkgs]
    steps:

    - name: Download deb
      id: download
      uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 # v2
      with:
        name: fleet-osquery_42.0.0_amd64.deb

    - name: Install deb
      run: |
        sudo hostname orbit-ubuntu
        sudo dpkg --install ${{ steps.download.outputs.download-path }}/fleet-osquery_42.0.0_amd64.deb

    - name: Wait enroll
      run: |
        # Wait until fleet server goes down.
        while curl --fail ${{ needs.gen.outputs.address }};
        do
          echo "Retrying in 10s..."
          sleep 10
        done

    - name: Run orbit shell
      run:
        sudo orbit shell -- --json "select * from osquery_info;" | jq -e 'if (.[0]) then true else false end'

    - name: Collect orbit logs
      if: always()
      run: |
        mkdir orbit-logs
        sudo journalctl -u orbit.service > orbit-logs/orbit_service.log

    - name: Upload orbit logs
      if: always()
      uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # v2
      with:
        name: orbit-logs
        path: |
          orbit-logs

    - name: Uninstall deb
      run: |
        sudo apt remove fleet-osquery -y


  orbit-windows:
    timeout-minutes: 60
    needs: [gen, run-tuf-and-gen-pkgs]
    runs-on: windows-latest
    steps:

    - name: Download msi
      id: download
      uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 # v2
      with:
        name: fleet-osquery.msi

    - name: Install msi
      shell: pwsh
      run: |
        Start-Process msiexec -ArgumentList "/i ${{ steps.download.outputs.download-path }}\fleet-osquery.msi /quiet /passive /lv log.txt" -Wait

    - name: Wait enroll
      run: |
        while curl --fail ${{ needs.gen.outputs.address }};
        do
          echo "Retrying in 10s..."
          sleep 10
        done

    - name: Run orbit shell
      shell: cmd
      run: |
        "C:\Program Files\Orbit\bin\orbit\orbit.exe" shell -- --json "select * from osquery_info;" | jq -e "if (.[0]) then true else false end"

    - name: Fleet Service Tests
      shell: pwsh
      run: |
        # Tests setup
        $serviceName = "Fleet osquery"
        $orbitMaxTimeToStartAndTeardown = 15

        # Test 1 - Check that the service starts without issues
        Stop-Service -Name $serviceName
        Start-Sleep -Seconds $orbitMaxTimeToStartAndTeardown
        Start-Service -Name $serviceName
        Get-Service -Name $serviceName | %{ if ($_.Status -ne "Running") { throw "Fleet Service test #1 failed" } }

        # Test 2 - Check that the service stops without issues
        Stop-Service -Name $serviceName
        Start-Sleep -Seconds $orbitMaxTimeToStartAndTeardown
        Get-Service -Name $serviceName | %{ if ($_.Status -ne "Stopped") { throw "Fleet Service test #2 failed" } }

        # Test 3 - Check that no orbit.exe is running after service stop (updated after graceful shutdown)
        #Start-Service -Name $serviceName
        #Start-Sleep -Seconds $orbitMaxTimeToStartAndTeardown
        #Stop-Service -Name $serviceName
        #Start-Sleep -Seconds ($orbitMaxTimeToStartAndTeardown * 10) # there is an issue with osqueryd runner intertupt that needs to be tracked down
        #Get-Process | %{ if ($_.Name -eq "orbit") { throw "Fleet Service test #3 failed" } }

        # Test 4 - Check that service starts in less than 3 secs
        #Start-Job { Start-Service -Name $args[0] } -ArgumentList $serviceName | Out-Null #async operation
        #Start-Sleep -Seconds 3
        #Get-Service -Name $serviceName | %{ if ($_.Status -ne "Running") { throw "Fleet Service test #4 failed" } }

        # Test 5 - Check that service stops in less than $orbitMaxTimeToStartAndTeardown secs
        #Start-Job { Stop-Service -Name $args[0] } -ArgumentList $serviceName  | Out-Null #async operation
        #Start-Sleep -Seconds $orbitMaxTimeToStartAndTeardown
        #Get-Service -Name $serviceName | %{ if ($_.Status -ne "Stopped") { throw "Fleet Service test #5 failed" } }
        
        # There is an sporadic issue with --insecure flag being used and osqueryd which causes long shutdown time, not testing this scenario until issue this scenario is sorted out

    - name: MSI Installer Tests
      shell: pwsh
      run: |
        # Tests setup
        $serviceName = "Fleet osquery"
        $registryPath = "HKLM:\SOFTWARE\FleetDM\"
        $installerExecTime = 15

        # Commenting test, being looked at as part of https://github.com/fleetdm/fleet/issues/8057
        
        # Test 1 - Check that there is not Orbit installation folder in programfiles and no registry entries after MSI uninstallation
        # msiexec /x ${{ steps.download.outputs.download-path }}\fleet-osquery.msi /quiet /passive /lv logtest1.txt
        # Start-Sleep -Seconds $installerExecTime
        # if (Test-Path -Path $Env:Programfiles\Orbit) { throw "MSI Installer test #1 failed" }
        # Get-Service -Name $serviceName -ErrorAction SilentlyContinue  | %{ if ($_.Name) { throw "MSI Installer test #1 failed" } }
        # if (((Get-ChildItem -Path $registryPath -ErrorAction SilentlyContinue | Measure-Object).Count) -gt 0) { throw "MSI Installer test #1 failed" }

        # Test 2 - Check that Orbit service, installation folder and registry entry are present after installing MSI again
        # msiexec /i ${{ steps.download.outputs.download-path }}\fleet-osquery.msi /quiet /passive /lv logtest2.txt
        # Start-Sleep -Seconds $installerExecTime
        # if (-not (Test-Path -Path $Env:Programfiles\Orbit)) { throw "MSI Installer test #2 failed" }
        # Get-Service -Name $serviceName -ErrorAction SilentlyContinue  | %{ if ($_.Status -ne "Running") { throw "MSI Installer test #2 failed" } }
        # if (((Get-ChildItem -Path $registryPath -ErrorAction SilentlyContinue | Measure-Object).Count) -eq 0) { throw "MSI Installer test #2 failed" }

        # Test 3 - Check that there is not Orbit folder in programfiles, no fleet service entry and no registry entries after uninstalling MSI again
        # msiexec /x ${{ steps.download.outputs.download-path }}\fleet-osquery.msi /quiet /passive /lv logtest3.txt
        # Start-Sleep -Seconds $installerExecTime
        # if (Test-Path -Path $Env:Programfiles\Orbit) { throw "MSI Installer test #3 failed" }
        # Get-Service -Name $serviceName -ErrorAction SilentlyContinue  | %{ if ($_.Name) { throw "MSI Installer test #3 failed" } }
        # if (((Get-ChildItem -Path $registryPath -ErrorAction SilentlyContinue | Measure-Object).Count) -gt 0) { throw "MSI Installer test #3 failed" }

        # Test 4 - Check that osquery manifest is present and that it points to the expected osqueryd.exe file
        # msiexec /i ${{ steps.download.outputs.download-path }}\fleet-osquery.msi /quiet /passive /lv logtest4.txt
        # Start-Sleep -Seconds $installerExecTime
        # Get-Content "$Env:Programfiles\Orbit\osquery.man" | % { if($_ -match 'resourceFileName=\"(.*?)\"') { if (-not (Test-Path -Path ([System.Environment]::ExpandEnvironmentVariables($Matches[1])))) { throw "MSI Installer test #4 failed" } } }

    - name: Upload Orbit logs
      if: always()
      uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # v2
      with:
        name: orbit-logs-windows
        path: C:\Windows\system32\config\systemprofile\AppData\Local\FleetDM\Orbit\Logs\orbit-osquery.log