FT-991 UKF + Transverter

[sq5jup]

Hello,

I've set up FT-991 as second transceiver, which I use for the 2-meter and 28 MHz bands, along with a transverter for the 4-meter band.
To operate on the 2-meter band, I need to set the offset to 0 MHz.
For the 4-meter band, the required offset is 42 MHz.
Everything is working well with this setup.

My question is:
Is there a way to configure offset settings individually for each band?
For example, in the scenario I described, or if I wanted to use two transverters with the same transceiver. Can offsets be assigned per band automatically?

73 de SQ5J,
Piotr

[foldynl]

The offset can only be defined for a rig profile.

[sq5jup]

Okay, understood.
Is there any chance this feature might be added in the future, or is it unlikely to be implemented?

73 de SQ5J,
Piotr

[foldynl]

Probably not, because I don't think that the rig offset should be defined by a band, but in my opinion the offset is defined by the rig setup (that means the rig profile).