Not supported by this device / controller-specific parameter list #535
-
Hi, I have a problem with the controller-specific parameter list. Complete dump: Not supported by this device. No problem. Fertig. Setup:
Can someone help me how I can get the list to be read out? |
Beta Was this translation helpful? Give feedback.
Replies: 13 comments 1 reply
-
Hm, something seems wrong, because the routine finds a device (id 0) which means the connection is ok, but when querying it, it doesn't get a response from the heater. That is very odd because even older heaters which do not support the device specific parameter list at least respond with their ID, but yours does none of that. |
Beta Was this translation helpful? Give feedback.
-
I'll try to reflash the system. |
Beta Was this translation helpful? Give feedback.
-
And if right after that query you try to request the "Reglerspezifische Parameterliste"? |
Beta Was this translation helpful? Give feedback.
-
unfortunately the same result in the log |
Beta Was this translation helpful? Give feedback.
-
with other parameters there is no feedback. Like here e.g. 712 |
Beta Was this translation helpful? Give feedback.
-
Can you attach the new file here, please, along with s screenshot of the configuration page and the configuration file? 712 is empty in the default version. |
Beta Was this translation helpful? Give feedback.
-
Is that all right? |
Beta Was this translation helpful? Give feedback.
-
You set device family and variant manually - did you try it with the default setting 0 / 0 for auto detection? |
Beta Was this translation helpful? Give feedback.
-
Yes. I started with 0/0 and that was an attempt on my part. |
Beta Was this translation helpful? Give feedback.
-
Seems all fine so far for me, but really can't explain the behavior, so my only suggestion would be to completely install everything from scratch... |
Beta Was this translation helpful? Give feedback.
-
I now had time to reinstall the system. It took much longer to create the file and there seems to be more data in it. |
Beta Was this translation helpful? Give feedback.
-
Yes, now it's working. Can you also tell us what the reason was for this failure? |
Beta Was this translation helpful? Give feedback.
-
Strange, but if that was a solution, I'll recommend that to the few users who have the same problem... |
Beta Was this translation helpful? Give feedback.
I don't know exactly. I only reflashed the ESP. I did not change the wiring. Thanks for the help