cam create two ip in same time ... ???

[niighthawk]

my cam is making two working ip where i can log on and interrac ... how is it possible ?

the one i set in the files ( 192.168.1.15 )
the second one creating from nowhere ( 192.168.1.128 )

here the log

Starting

to log...
Hardware version informations :
hwplatform=2
Software version informations :
[sys]
version=1.8.5.1M_201512011815
[kernel]
version=3-0.8
provider=18e
devtype=18e
Firmware letter is : 'M'
The RTSP server binary version which will be used is the 'M'
The HTTP server binary version which will be used is the 'M'
Check for some files size...
-rwxr-xr-x 1 root root 144885 Oct 4 2016 /home/hd1/test/http/serverJ
-rwxr-xr-x 1 root root 144912 Oct 4 2016 /home/hd1/test/http/serverM
-rwxr-xr-x 1 root root 121932 Oct 4 2016 /home/hd1/test/rtspsvrI
-rwxr-xr-x 1 root root 39572 Oct 4 2016 /home/hd1/test/rtspsvrK
-rwxr-xr-x 1 root root 39580 Oct 4 2016 /home/hd1/test/rtspsvrM
The blue led is currently blinking
Debug mode = no
Check for wifi configuration file...*
/home/wpa_supplicant.conf
Start wifi configuration...
Status for wifi configuration=0 (0 is ok)
Wifi configuration answer:
Do network configuration 1/2 (ip and gateway)
Done
Configuration is :
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

ra0       Link encap:Ethernet  HWaddr 20:F4:1B:F5:2E:85  
          inet addr:192.168.1.15  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::22f4:1bff:fef5:2e85/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:401 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:83897 (81.9 KiB)  TX bytes:300 (300.0 B)

Do network configuration 2/2 (DNS)
Done
Get time from a NTP server...
But first, test the NTP server '216.239.35.0
':
PING 216.239.35.0
(216.239.35.0): 56 data bytes

--- 216.239.35.0
ping statistics ---
1 packets transmitted, 0 packets received, 100% packet loss
Previous datetime is Sun Jan 6 13:30:48 UTC 2019
Done
New datetime is Sun Jan 6 13:30:49 UTC 2019
Start blue led on
Start ftp server...
Check for ftp process :
1302 root 1716 S tcpsvd -vE 0.0.0.0 21 ftpd -w /
Start http server : serverM...
Check for http server process :
1329 root 1408 S ./serverM 80
Start rtsp server : rtspsvrM...
Check for rtsp process :
1433 root 2660 S < ./rtspsvrM
Processes after startup :
PID USER VSZ STAT COMMAND
1 root 1708 S init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW [kworker/u:0]
6 root 0 SW [rcu_kthread]
7 root 0 SW< [khelper]
8 root 0 SW [kworker/u:1]
143 root 0 SW [sync_supers]
145 root 0 SW [bdi-default]
146 root 0 SW< [kintegrityd]
148 root 0 SW< [kblockd]
161 root 0 SW [khubd]
174 root 0 SW< [cfg80211]
175 root 0 SW [kworker/0:1]
257 root 0 SW< [rpciod]
260 root 0 SW [kswapd0]
314 root 0 SW [fsnotify_mark]
322 root 0 SW< [nfsiod]
331 root 0 SW< [crypto]
405 root 0 SW [mtdblock0]
410 root 0 SW [mtdblock1]
415 root 0 SW [mtdblock2]
420 root 0 SW [mtdblock3]
425 root 0 SW [mtdblock4]
430 root 0 SW [mtdblock5]
435 root 0 SW [mtdblock6]
438 root 0 SW [romblock0]
441 root 0 SW [romblock1]
444 root 0 SW [romblock2]
447 root 0 SW [romblock3]
450 root 0 SW [romblock4]
453 root 0 SW [romblock5]
456 root 0 SW [romblock6]
591 root 0 SW< [kpsmoused]
600 root 0 SW [kworker/u:2]
616 root 0 SW [mmcqd/0]
620 root 0 SWN [jffs2_gcd_mtd4]
624 root 1712 S /bin/sh /etc/init.d/rcS
636 root 872 S < udevd --daemon
642 root 1704 S /bin/sh /etc/init.d/S80network
656 root 0 SWN [jffs2_gcd_mtd5]
657 root 1708 S /bin/sh ./init.sh
664 root 0 SW [flush-mtd-unmap]
675 root 1724 S /bin/sh /home/hd1/test/equip_test.sh
677 root 0 SW [flush-179:0]
680 root 1704 S telnetd
686 root 984 S /home/log_server
816 root 0 RW [RtmpTimerTask]
817 root 0 SW [RtmpMlmeTask]
818 root 0 SW [RtmpCmdQTask]
819 root 0 SW [RtmpWscTask]
949 root 0 SW [hidog]
987 root 1164 S ./peripheral
988 root 1144 S < ./dispatch
989 root 1060 S ./exnet
1125 root 3128 S /home/wpa_supplicant -B -i ra0 -c /home/wpa_supplica
1257 root 1704 S ntpd -q -p 216.239.35.0
1302 root 1716 S tcpsvd -vE 0.0.0.0 21 ftpd -w /
1329 root 1408 S ./serverM 80
1347 root 3392 S ./record_event
1348 root 23068 S ./mp4record 60
1377 root 1716 S /usr/sbin/crond -b
1392 root 904 S /home/led_ctl -boff -bon
1428 root 94416 S ./rmm
1433 root 27252 S N ./rtspsvrM
1544 root 1708 R ps
Storage status :
Filesystem Size Used Available Use% Mounted on
/dev/root 3.5M 2.7M 856.0K 76% /
tmpfs 17.2M 16.0K 17.2M 0% /dev
/dev/mtdblock5 8.9M 8.0M 920.0K 90% /home
tmpfs 32.0M 44.0K 32.0M 0% /tmp
/dev/hd1 29.9G 11.3M 29.9G 0% /tmp/hd1
tmpfs 512.0K 16.0K 496.0K 3% /home/mmap_tmpfs
tmpfs 16.0M 4.0K 16.0M 0% /home/tmpfs
tmpfs 16.0M 3.0M 13.0M 19% /home/jrview
/dev/hd1 29.9G 11.3M 29.9G 0% /tmp/hd1/test/http/record

[oleg-sh]

See this pull request
If you want to remove the second IP you need to add these lines into your equip_test.sh

[niighthawk]

@oleg-sh

ok its working .. but I have a Yellow light trouble now...Blinking none stop ..

See this pull request
If you want to remove the second IP you need to add these lines into your equip_test.sh