Support for small files in _split_file

[kmpaul]

I've noticed that the kerchunk.grib2._split_file() function does not work if the file being scanned is smaller than 1024 bytes. The if len(head) < 1024: break # eof line/block is the culprit:

kerchunk/kerchunk/grib2.py

Lines 49 to 64 in a0c4f3b

	while f.tell() < size:
	logger.debug(f"extract part {part + 1}")
	head = f.read(1024)
	if len(head) < 1024:
	break # EOF
	if b"GRIB" not in head:
	f.seek(-4, 1)
	continue
	ind = head.index(b"GRIB")
	start = f.tell() - 1024 + ind
	part_size = int.from_bytes(head[ind + 12 : ind + 16], "big")
	f.seek(start)
	yield start, part_size, f.read(part_size)
	part += 1
	if skip and part >= skip:
	break

Is it safe to remove this early break so that files smaller than 1024 bytes can be dealt with? Essentially, the final while block would look like:

 while f.tell() < size: 
     logger.debug(f"extract part {part + 1}") 
     head = f.read(1024) 
     # if len(head) < 1024: 
     #     break  # EOF 
     if b"GRIB" not in head: 
         f.seek(-4, 1) 
         continue 
     ind = head.index(b"GRIB") 
     # start = f.tell() - 1024 + ind 
     start = f.tell() - len(head) + ind 
     part_size = int.from_bytes(head[ind + 12 : ind + 16], "big") 
     f.seek(start) 
     yield start, part_size, f.read(part_size) 
     part += 1 
     if skip and part >= skip: 
         break 

It is unclear to me if this would cause problems with other GRIB files than the datasets I've handled myself.

[martindurant]

I could maybe be if not head (i.e., we unexpectedly reached EOF), although it looks like this would be caught by looking for GRIB and the outer while. Your suggestion is very probably fine.

Out of interest, what possible information is there in such a small GRIB?

[kmpaul]

@martindurant: Ha! You would be surprised how much is in my tiny GRIB message. 😄 The actual file size is less than 200 bytes, which originally made me thing that my download had failed and the file was incomplete. However, it turns out it is a completely valid GRIB file. It's a testament to the fact that GRIB is not really a fully self-describing data format. You need other libraries (like eccodes and cfgrib) to "fill in the gaps." The information in that <200bytes is enough to construct a 72-million-member point cloud of all zeros. And even the lat-lon values are specified with a code value that contains the grid information (it is regular lat-lon grid). The result is a file that is smaller than 200B that can be used to procedurally generate (with cfgrib) an Xarray DataArray that is about 275MB.

I will put together a PR to make the changes I offered above for review.

[kmpaul]

I just created #451 to address this.

[kmpaul]

@martindurant: Thanks for your help and feedback on #446, #448, #450, and #451!

[martindurant]

Thanks for your efforts :)