Doesn't work with XT-4 firmware 2.00 #45
-
|
Hi, tried with M5Stick CPlus1.1, X-T4 and firmware 2.00, but doesn't connect. Any suggestions? |
Beta Was this translation helpful? Give feedback.
Replies: 5 comments
-
|
@93RichardB Thanks for the query. |
Beta Was this translation helpful? Give feedback.
-
|
OK, I am very interested in the process too. I can see the various options to program the M5, but it isn’t clear how you do the reverse engineering to get the Fuji structures.
Richard
Sent from my iPad
…________________________________
From: Guo-Rong ***@***.***>
Sent: Tuesday, June 13, 2023 6:33:58 AM
To: gkoh/furble ***@***.***>
Cc: 93RichardB ***@***.***>; Mention ***@***.***>
Subject: Re: [gkoh/furble] Doesn't work with XT-4 firmware 2.00 (Discussion #45)
@93RichardB<https://github.com/93RichardB> Thanks for the query.
I haven’t had a chance to upgrade to firmware 2.00 yet.
Sounds like I will need to repeat the reverse engineering to get it working again.
Give me some time to find time to investigate.
—
Reply to this email directly, view it on GitHub<#45 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BAPUOS7OMHNWJJVWQ5OXHC3XLA6ZNANCNFSM6AAAAAAZCQNGVA>.
You are receiving this because you were mentioned.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
See here for the protocol part (you need an Android device): After that, we infer structures from the bytes we see over the wire. |
Beta Was this translation helpful? Give feedback.
-
|
Thank you. Will read. I have mostly iOS, but I think I have an android tablet somewhere.
Thanks for the replies, and for the project!
Regards
Richard
Richard
Sent from my iPad
…________________________________
From: Guo-Rong ***@***.***>
Sent: Tuesday, June 13, 2023 7:26:57 AM
To: gkoh/furble ***@***.***>
Cc: 93RichardB ***@***.***>; Mention ***@***.***>
Subject: Re: [gkoh/furble] Doesn't work with XT-4 firmware 2.00 (Discussion #45)
See here for the protocol part (you need an Android device):
https://github.com/gkoh/furble#protocol-reverse-engineering
After that, we infer structures from the bytes we see over the wire.
There is some educated guessing and experimentation to get something working.
—
Reply to this email directly, view it on GitHub<#45 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BAPUOS3TPM7FG4KZNWLOSH3XLBFADANCNFSM6AAAAAAZCQNGVA>.
You are receiving this because you were mentioned.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
This is now #46. |
Beta Was this translation helpful? Give feedback.
This is now #46.