This library is meant to handle Web Authentication for Go apps that wish to implement a passwordless solution for users. This library conforms as much as possible to the guidelines and implementation procedures outlined by the document.
This library is a hard fork of github.com/duo-labs/webauthn and is the natural successor to that library.
See the migration guide for more information about how to migrate and the differences between the libraries.
It is distributed under the same 3-Clause BSD license as the original fork, with the only amendment being the additional 3-Clause BSD license attributing license rights to this repository.
This library; unless otherwise explicitly expressed; will officially support versions of go which are currently supported by the go maintainers (usually 3 minor versions) with a brief transition time (usually 1 patch release of go, for example if go 1.21.0 is released, we will likely still support go 1.17 until go 1.21.1 is released). These specific rules apply at the time of a published release.
This library in our opinion handles a critical element of security in a dependent project and we aim to avoid backwards compatibility at the cost of security wherever possible. We also consider this especially important in a language like go where their backwards compatibility when upgrading the compile tools is usually flawless.
This policy means that users who wish to build this with older versions of go may find there are features being used which are not available in that version. The current intentionally supported versions of go are as follows:
- go 1.22
- go 1.21
go 1.20:- Go 1.20 support has been removed due to the new toolchain directive and lack of support in Go 1.20. This directive is unfortunately being used in dependent libraries and we'd opt for ensuring we can easily obtain potential fixes to CVE's rather than backwards compatibility. A such we have lifted the version requirement and implemented the toolchain directive in our module to reflect the intended toolchain.
This library is still version 0, as per Semantic Versioning 2.0 rules there may be breaking changes without warning. While we strive to avoid such changes and strive to notify users they may be unavoidable.
go get github.com/go-webauthn/webauthn and initialize it in your application with basic configuration values.
Make sure your user model is able to handle the interface functions laid out in webauthn/types.go. This means also
supporting the storage and retrieval of the credential and authenticator structs in webauthn/credential.go and
webauthn/authenticator.go, respectively.
The following examples show some basic use cases of the library. For consistency sake the following variables are used to denote specific things:
- Variable
webAuthn: thewebauthn.WebAuthninstance you initialize elsewhere in your code - Variable
datastore: the pseudocode backend service that stores your webauthn session data and users such as PostgreSQL - Variable
session: the webauthn.SessionData object - Variable
user: your webauthn.User implementation
We try to avoid using specific external libraries (excluding stdlib) where possible, and you'll need to adapt these examples with this in mind.
package example
import (
"fmt"
"github.com/go-webauthn/webauthn/webauthn"
)
var (
webAuthn *webauthn.WebAuthn
err error
)
// Your initialization function
func main() {
wconfig := &webauthn.Config{
RPDisplayName: "Go Webauthn", // Display Name for your site
RPID: "go-webauthn.local", // Generally the FQDN for your site
RPOrigins: []string{"https://login.go-webauthn.local"}, // The origin URLs allowed for WebAuthn requests
}
if webAuthn, err = webauthn.New(wconfig); err != nil {
fmt.Println(err)
}
}package example
func BeginRegistration(w http.ResponseWriter, r *http.Request) {
user := datastore.GetUser() // Find or create the new user
options, session, err := webAuthn.BeginRegistration(user)
// handle errors if present
// store the sessionData values
JSONResponse(w, options, http.StatusOK) // return the options generated
// options.publicKey contain our registration options
}
func FinishRegistration(w http.ResponseWriter, r *http.Request) {
user := datastore.GetUser() // Get the user
// Get the session data stored from the function above
session := datastore.GetSession()
credential, err := webAuthn.FinishRegistration(user, session, r)
if err != nil {
// Handle Error and return.
return
}
// If creation was successful, store the credential object
// Pseudocode to add the user credential.
user.AddCredential(credential)
datastore.SaveUser(user)
JSONResponse(w, "Registration Success", http.StatusOK) // Handle next steps
}package example
func BeginLogin(w http.ResponseWriter, r *http.Request) {
user := datastore.GetUser() // Find the user
options, session, err := webAuthn.BeginLogin(user)
if err != nil {
// Handle Error and return.
return
}
// store the session values
datastore.SaveSession(session)
JSONResponse(w, options, http.StatusOK) // return the options generated
// options.publicKey contain our registration options
}
func FinishLogin(w http.ResponseWriter, r *http.Request) {
user := datastore.GetUser() // Get the user
// Get the session data stored from the function above
session := datastore.GetSession()
credential, err := webAuthn.FinishLogin(user, session, r)
if err != nil {
// Handle Error and return.
return
}
// Handle credential.Authenticator.CloneWarning
// If login was successful, update the credential object
// Pseudocode to update the user credential.
user.UpdateCredential(credential)
datastore.SaveUser(user)
JSONResponse(w, "Login Success", http.StatusOK)
}You can modify the default credential creation options for registration and login by providing optional structs to the
BeginRegistration and BeginLogin functions.
You can modify the registration options in the following ways:
package example
import (
"github.com/go-webauthn/webauthn/protocol"
"github.com/go-webauthn/webauthn/webauthn"
)
var webAuthn webauthn.WebAuthn // init this in your init function
func beginRegistration() {
// Updating the AuthenticatorSelection options.
// See the struct declarations for values
authSelect := protocol.AuthenticatorSelection{
AuthenticatorAttachment: protocol.AuthenticatorAttachment("platform"),
RequireResidentKey: protocol.ResidentKeyNotRequired(),
UserVerification: protocol.VerificationRequired,
}
// Updating the ConveyencePreference options.
// See the struct declarations for values
conveyancePref := protocol.PreferNoAttestation
user := datastore.GetUser() // Get the user
opts, session, err := webAuthn.BeginRegistration(user, webauthn.WithAuthenticatorSelection(authSelect), webauthn.WithConveyancePreference(conveyancePref))
// Handle next steps
}You can modify the login options to allow only certain credentials:
package example
import (
"github.com/go-webauthn/webauthn/protocol"
"github.com/go-webauthn/webauthn/webauthn"
)
var webAuthn webauthn.WebAuthn // init this in your init function
func beginLogin() {
// Updating the AuthenticatorSelection options.
// See the struct declarations for values
allowList := make([]protocol.CredentialDescriptor, 1)
allowList[0] = protocol.CredentialDescriptor{
CredentialID: credentialToAllowID,
Type: protocol.CredentialType("public-key"),
}
user := datastore.GetUser() // Get the user
opts, session, err := w.BeginLogin(user, webauthn.WithAllowedCredentials(allowList))
// Handle next steps
}The library by default does not enforce timeouts. However the default timeouts sent to the browser are taken from the specification. You can override both of these behaviours however.
package example
import (
"fmt"
"time"
"github.com/go-webauthn/webauthn/protocol"
"github.com/go-webauthn/webauthn/webauthn"
)
func main() {
wconfig := &webauthn.Config{
RPDisplayName: "Go Webauthn", // Display Name for your site
RPID: "go-webauthn.local", // Generally the FQDN for your site
RPOrigins: []string{"https://login.go-webauthn.local"}, // The origin URLs allowed for WebAuthn requests
Timeouts: webauthn.TimeoutsConfig{
Login: webauthn.TimeoutConfig{
Enforce: true, // Require the response from the client comes before the end of the timeout.
Timeout: time.Second * 60, // Standard timeout for login sessions.
TimeoutUVD: time.Second * 60, // Timeout for login sessions which have user verification set to discouraged.
},
Registration: webauthn.TimeoutConfig{
Enforce: true, // Require the response from the client comes before the end of the timeout.
Timeout: time.Second * 60, // Standard timeout for registration sessions.
TimeoutUVD: time.Second * 60, // Timeout for login sessions which have user verification set to discouraged.
},
},
}
webAuthn, err := webauthn.New(wconfig)
if err != nil {
fmt.Println(err)
}
}The WebAuthn Level 3 specification describes the Credential Record which includes several required and optional elements that you should store for. See § 4 Terminology for details.
This section describes this element.
The fields listed in the specification have corresponding fields in the webauthn.Credential struct. See the below table for more information. We also include JSON mappings for those that wish to just store these values as JSON.
| Specification Field | Library Field | JSON Field | Notes |
|---|---|---|---|
| type | N/A | N/A | This field is always publicKey for WebAuthn |
| id | ID | id | |
| publicKey | PublicKey | publicKey | |
| signCount | Authenticator.SignCount | authenticator.signCount | |
| transports | Transport | transport | |
| uvInitialized | Flags.UserVerified | flags.userVerified | |
| backupEligible | Flags.BackupEligible | flags.backupEligible | |
| backupState | Flags.BackupState | flags.backupState | |
| attestationObject | Attestation.Object | attestation.object | This field is a composite of the attestationObject and the relevant values to validate it |
| attestationClientDataJSON | Attestation.ClientDataJSON | attestation.clientDataJSON |
It is also important to note that restoring the webauthn.Credential with the correct values will likely affect the validity of the webauthn.Credential, i.e. if some values are not restored the webauthn.Credential may fail validation in this scenario.
As long as the webauthn.Credential struct has exactly the same values when restored the Credential Verify function can be leveraged to verify the credential against the metadata.Provider. This can be either done during registration, on every login, or with a audit schedule.
In addition to using the Credential Verify function the webauthn.Config can contain a provider which will process all registrations automatically.
At this time no tooling exists to verify the credential automatically outside the registration flow. Implementation of this is considered domain logic and beyond the scope of what we provide documentation for; we just provide the necessary tooling to implement this yourself.
We graciously acknowledge the original authors of this library github.com/duo-labs/webauthn for their amazing implementation. Without their amazing work this library could not exist.