Made to fit with the 9mm Belt mod XY idlers and AB stepper mounts found here: https://www.printables.com/model/485237-voron-24-9mm-gantry (which might also be this project on github: https://github.com/Sneeky-Pete/Fatso)
These replace the 9mm ramalama2 front idlers in the Etretti Voron 2.4 9mm gantry
For V2.4 9mm BFI, you'll need:
- 4× M5×30 BHCS
- 4× M5 hex nuts
- 2× 5mm-diameter pin, 22mm long
- 2× M3 t-nuts
- 2× M3×16 BHCS (i think, but might need longer)
...plus the 14mm shim/bearing stack setup for each idler, same as the 9mm belt mod front idlers.
- clee for the BFI BZI mod
- Etretti &&|| Sneeky-Pete for the 9mm mod
- Johan/Alucardi V2.12171 V0.1479 for breaking his 9mm ramalama2 idlers
- 20230910: initial version