From 74c3ed15d3e19bb7f0532deceaf22c081aab47c5 Mon Sep 17 00:00:00 2001
From: bishko <23706061+bishko@users.noreply.github.com>
Date: Fri, 3 May 2024 08:43:17 +0100
Subject: [PATCH 1/5] Update messages.json
Fixed capitalising on sub-heading titles.
---
locale/en/messages.json | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/locale/en/messages.json b/locale/en/messages.json
index 7a2408531..017baabd9 100644
--- a/locale/en/messages.json
+++ b/locale/en/messages.json
@@ -3065,10 +3065,10 @@
"message": "Wireless mode"
},
"rthConfiguration": {
- "message": "RTH settings"
+ "message": "RTH Settings"
},
"autoLandingSettings": {
- "message": "Automatic landing settings"
+ "message": "Automatic Landing Settings"
},
"minRthDistance": {
"message": "Min. RTH distance"
From 6ef9f1700d5eb1c71678b8c0b28764f52b428dd2 Mon Sep 17 00:00:00 2001
From: bishko <23706061+bishko@users.noreply.github.com>
Date: Fri, 3 May 2024 09:16:03 +0100
Subject: [PATCH 2/5] Update messages.json
Fixed some other capitalisation on titles.
---
locale/en/messages.json | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/locale/en/messages.json b/locale/en/messages.json
index 017baabd9..55aa9fbc1 100644
--- a/locale/en/messages.json
+++ b/locale/en/messages.json
@@ -1341,7 +1341,7 @@
"message": "Reset PID Controller"
},
"pidTuning_PIDgains": {
- "message": "PID gains"
+ "message": "PID Gains"
},
"pidTuning_Name": {
"message": "Name"
@@ -1506,7 +1506,7 @@
"message": "Mechanics"
},
"pidTuning_ITermMechanics": {
- "message": "I-term mechanics"
+ "message": "I-term Mechanics"
},
"pidTuning_itermRelaxCutoff": {
"message": "I-term Relax Cutoff Frequency"
@@ -1530,7 +1530,7 @@
"message": "Freeze yaw Iterm when plane is banked more than this many degrees. This helps to stop the rudder from counteracting turn. 0 disables this feature. Applies only to fixed wing aircraft."
},
"pidTuning_dTermMechanics": {
- "message": "D-term mechanics"
+ "message": "D-term Mechanics"
},
"pidTuning_d_boost_min": {
"message": "D-Boost Min. Scale"
@@ -1557,7 +1557,7 @@
"message": "Should be set to the frequency of propeller wash oscillations. 5-inch quads work best at around 80Hz, 7-inch quads at around 50Hz"
},
"pidTuning_tpaMechanics": {
- "message": "Thrust PID attenuation"
+ "message": "Thrust PID Attenuation"
},
"pidTuning_TPA": {
"message": "Thrust PID Attenuation (TPA)"
@@ -1572,7 +1572,7 @@
"message": "TPA smoothing and delay time constant to reflect non-instant speed/throttle response of the plane."
},
"pidTuning_fwLevelTrimMechanics": {
- "message": "Fixed Wing mechanics"
+ "message": "Fixed Wing Mechanics"
},
"pidTuning_fw_level_pitch_trim": {
"message": "Level Trim [deg]"
@@ -2755,7 +2755,7 @@
"message": "OSD"
},
"configurationSensors": {
- "message": "Sensors & buses"
+ "message": "Sensors & Buses"
},
"sensorAccelerometer": {
"message": "Accelerometer"
From 781170b69778fb451a84798237332b6e12c27f8a Mon Sep 17 00:00:00 2001
From: bishko <23706061+bishko@users.noreply.github.com>
Date: Fri, 3 May 2024 09:49:51 +0100
Subject: [PATCH 3/5] Update messages.json
Fixing other capitaqlising on tab names and headings.
---
locale/en/messages.json | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/locale/en/messages.json b/locale/en/messages.json
index 55aa9fbc1..13f282ff1 100644
--- a/locale/en/messages.json
+++ b/locale/en/messages.json
@@ -2088,7 +2088,7 @@
"message": "Baud Rate"
},
"magnetometerHead": {
- "message": "Alignment tool"
+ "message": "Alignment Tool"
},
"magnetometerHelp": {
"message": "1. Adjust Flight Controller orientation to match physical orientation on the aircraft according to \"direction\" arrow on Flight Controller.
2. Adjust magnetometer orientation to match physical orientation on the aircraft according to \"compass direction\" arrow or axis markings on magnetometer.
Note: Magnetometer orientation preset (align_mag) is relative to FC. Make sure to align FC first (align_board_pitch, align_board_roll, align_board_yaw).
If preset is not used (orientation is set using align_mag_roll, align_mag_pitch and align_mag_yaw), then magnetometer orientation is independent."
@@ -2123,7 +2123,7 @@
"message": "Mag Statistics"
},
"tabMAGNETOMETER": {
- "message": "Alignment tool"
+ "message": "Alignment Tool"
},
"motors": {
"message": "Motors"
From 74a0c026346c540cf38d8e4a7aea0995bb02dcb6 Mon Sep 17 00:00:00 2001
From: bishko <23706061+bishko@users.noreply.github.com>
Date: Fri, 3 May 2024 11:23:48 +0100
Subject: [PATCH 4/5] Update messages.json
---
locale/en/messages.json | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/locale/en/messages.json b/locale/en/messages.json
index 13f282ff1..0a1a26ba3 100644
--- a/locale/en/messages.json
+++ b/locale/en/messages.json
@@ -972,7 +972,7 @@
"message": "Minimum Command"
},
"configurationVoltageCurrentSensor": {
- "message": "Voltage and Current Sensors"
+ "message": "Voltage & Current Sensors"
},
"configurationBatteryCurrent": {
"message": "Battery Current"
@@ -1329,10 +1329,10 @@
"message": "Show all PIDs"
},
"pidTuning_PIDmain": {
- "message": "Main PID gains"
+ "message": "Main PID Gains"
},
"pidTuning_PIDother": {
- "message": "Additional PID gains"
+ "message": "Additional PID Gains"
},
"pidTuning_SelectNewDefaults": {
"message": "Select New Defaults"
@@ -2252,7 +2252,7 @@
"message": "Your flight controller's firmware does not support Blackbox logging or Blackbox feature is not enabled"
},
"blackboxConfiguration": {
- "message": "Blackbox configuration"
+ "message": "Blackbox Configuration"
},
"blackboxButtonSave": {
"message": "Save and Reboot"
@@ -3530,7 +3530,7 @@
"message": "Home Position on Arming Screen"
},
"osd_hud_settings": {
- "message": "Heads up Display settings"
+ "message": "Heads-up Display settings"
},
"osd_custom_element_settings": {
"message": "Custom OSD elements"
@@ -3758,13 +3758,13 @@
"message": "GPS"
},
"osdGroupPowerLimits": {
- "message": "Power limits"
+ "message": "Power Limits"
},
"osdGroupPIDs": {
"message": "RC Adjustable Values"
},
"osdGroupPIDOutputs": {
- "message": "PID controllers outputs"
+ "message": "PID Controllers Outputs"
},
"osdGroupVTX": {
"message": "VTX"
@@ -3773,10 +3773,10 @@
"message": "CRSF RX Statistics"
},
"osdGroupMapsAndRadars": {
- "message": "Maps and Radars"
+ "message": "Maps & Radars"
},
"osdGroupMapsAndRadars_HELP": {
- "message": "Maps and radars allow laying out additional elements on top of them as long as they don't overlap any of the map parts visible in the preview."
+ "message": "Maps & radars allow laying out additional elements on top of them as long as they don't overlap any of the map parts visible in the preview."
},
"osdElement_ONTIME_FLYTIME": {
"message": "On Time / Fly Time"
@@ -3791,7 +3791,7 @@
"message": "Battery Voltage"
},
"osdElement_SAG_COMP_MAIN_BATT_VOLTAGE": {
- "message": "Sag Compensated Battery Voltage"
+ "message": "Sag-compensated Battery Voltage"
},
"osdElement_SAG_COMP_MAIN_BATT_VOLTAGE_HELP": {
"message": "Calculated voltage the battery should be at without load (simulates ideal battery)"
@@ -3806,7 +3806,7 @@
"message": "Battery Cell Voltage"
},
"osdElement_SAG_COMP_MAIN_BATT_CELL_VOLTAGE": {
- "message": "Sag Compensated Battery Cell Voltage"
+ "message": "Sag-compensated Battery Cell Voltage"
},
"osdElement_SAG_COMP_MAIN_BATT_CELL_VOLTAGE_HELP": {
"message": "Calculated average cell voltage the battery should be at without load (simulates ideal battery)"
@@ -4586,7 +4586,7 @@
"message": "Warning:value beyond normal operation range."
},
"servoMixer": {
- "message": "Servo mixer"
+ "message": "Servo Mixer"
},
"servoMixerDelete": {
"message": "Delete"
@@ -4598,13 +4598,13 @@
"message": "Platform type"
},
"platformConfiguration": {
- "message": "Platform configuration"
+ "message": "Platform Configuration"
},
"output_modeTitle": {
"message": "Output mode"
},
"mixerPreset": {
- "message": "Mixer preset"
+ "message": "Mixer Preset"
},
"mixerNotLoaded": {
"message": "Mixer not loaded.
Click Load and apply or Load mixer to use the selected mixer.
Or click Refresh mixer to use your current mixer."
@@ -5694,7 +5694,7 @@
"message": "Cannot prefetch target: No port"
},
"timerOutputs": {
- "message": "Timer outputs"
+ "message": "Timer Outputs"
},
"ezTuneFilterHz": {
"message": "Filter Hz"
From 72eee42891776c1cbf4ce68575e31e2a805ec1b7 Mon Sep 17 00:00:00 2001
From: bishko <23706061+bishko@users.noreply.github.com>
Date: Fri, 3 May 2024 11:26:07 +0100
Subject: [PATCH 5/5] Update messages.json
---
locale/en/messages.json | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/locale/en/messages.json b/locale/en/messages.json
index 0a1a26ba3..7fac35e70 100644
--- a/locale/en/messages.json
+++ b/locale/en/messages.json
@@ -5393,28 +5393,28 @@
"message": "Dataflash: free space"
},
"mixerProfile1": {
- "message": "Mixer profile 1"
+ "message": "Mixer Profile 1"
},
"mixerProfile2": {
- "message": "Mixer profile 2"
+ "message": "Mixer Profile 2"
},
"sensorProfile1": {
- "message": "PID profile 1"
+ "message": "PID Profile 1"
},
"sensorProfile2": {
- "message": "PID profile 2"
+ "message": "PID Profile 2"
},
"sensorProfile3": {
- "message": "PID profile 3"
+ "message": "PID Profile 3"
},
"sensorBatteryProfile1": {
- "message": "Battery profile 1"
+ "message": "Battery Profile 1"
},
"sensorBatteryProfile2": {
- "message": "Battery profile 2"
+ "message": "Battery Profile 2"
},
"sensorBatteryProfile3": {
- "message": "Battery profile 3"
+ "message": "Battery Profile 3"
},
"sensorStatusGyro": {
"message": "Gyroscope"