diff --git a/src/main/target/HGLRCF405V2/CMakeLists.txt b/src/main/target/HGLRCF405V2/CMakeLists.txt
new file mode 100644
index 00000000000..78d10e3671d
--- /dev/null
+++ b/src/main/target/HGLRCF405V2/CMakeLists.txt
@@ -0,0 +1 @@
+target_stm32f405xg(HGLRCF405V2)
diff --git a/src/main/target/HGLRCF405V2/target.c b/src/main/target/HGLRCF405V2/target.c
new file mode 100644
index 00000000000..ee7b97bbaa0
--- /dev/null
+++ b/src/main/target/HGLRCF405V2/target.c
@@ -0,0 +1,39 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV. If not, see .
+ */
+
+#include
+#include
+
+#include "drivers/io.h"
+#include "drivers/timer.h"
+
+timerHardware_t timerHardware[] = {
+ DEF_TIM(TIM5, CH4, PA3, TIM_USE_PPM , 0, 1), // PPM IN
+
+ DEF_TIM(TIM8, CH1, PC6, TIM_USE_OUTPUT_AUTO, 0, 1), // S1
+ DEF_TIM(TIM8, CH2, PC7, TIM_USE_OUTPUT_AUTO, 0, 1), // S2
+ DEF_TIM(TIM8, CH3, PC8, TIM_USE_OUTPUT_AUTO, 0, 1), // S3
+ DEF_TIM(TIM8, CH4, PC9, TIM_USE_OUTPUT_AUTO, 0, 0), // S4
+ DEF_TIM(TIM2, CH1, PA15, TIM_USE_OUTPUT_AUTO, 0, 0), // S5
+ DEF_TIM(TIM1, CH1, PA8, TIM_USE_OUTPUT_AUTO, 0, 1), // S6
+ DEF_TIM(TIM2, CH3, PB10, TIM_USE_OUTPUT_AUTO, 0, 0), // S7
+ DEF_TIM(TIM2, CH4, PB11, TIM_USE_OUTPUT_AUTO, 0, 0), // S8
+
+ DEF_TIM(TIM3, CH4, PB1, TIM_USE_LED, 0, 0), // LED_STRIP
+};
+
+const int timerHardwareCount = sizeof(timerHardware) / sizeof(timerHardware[0]);
diff --git a/src/main/target/HGLRCF405V2/target.h b/src/main/target/HGLRCF405V2/target.h
new file mode 100644
index 00000000000..9f3a02b48f7
--- /dev/null
+++ b/src/main/target/HGLRCF405V2/target.h
@@ -0,0 +1,157 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV. If not, see .
+ */
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "HGF4V2"
+#define USBD_PRODUCT_STRING "HGLRCF405V2"
+
+#define USE_TARGET_CONFIG
+
+/*** Indicators ***/
+#define LED0 PC13
+#define BEEPER PB8
+#define BEEPER_INVERTED
+
+/*** SPI/I2C bus ***/
+#define USE_SPI
+#define USE_SPI_DEVICE_1
+#define SPI1_NSS_PIN PA4
+#define SPI1_SCK_PIN PA5
+#define SPI1_MISO_PIN PA6
+#define SPI1_MOSI_PIN PA7
+
+#define USE_SPI_DEVICE_2
+#define SPI2_NSS_PIN PA13
+#define SPI2_SCK_PIN PB13
+#define SPI2_MISO_PIN PB14
+#define SPI2_MOSI_PIN PB15
+
+#define USE_SPI_DEVICE_3
+#define SPI3_NSS_PIN PC0
+#define SPI3_SCK_PIN PB3
+#define SPI3_MISO_PIN PB4
+#define SPI3_MOSI_PIN PB5
+
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C1_SCL PB6
+#define I2C1_SDA PB7
+
+
+/*** IMU sensors ***/
+
+// MPU6000
+#define USE_IMU_MPU6000
+#define IMU_MPU6000_ALIGN CW270_DEG
+#define MPU6000_SPI_BUS BUS_SPI1
+#define MPU6000_CS_PIN SPI1_NSS_PIN
+
+// ICM42605/ICM42688P
+#define USE_IMU_ICM42605
+#define IMU_ICM42605_ALIGN CW270_DEG
+#define ICM42605_SPI_BUS BUS_SPI1
+#define ICM42605_CS_PIN SPI1_NSS_PIN
+
+/*** OSD ***/
+#define USE_MAX7456
+#define MAX7456_SPI_BUS BUS_SPI2
+#define MAX7456_CS_PIN SPI2_NSS_PIN
+
+/*** Onboard flash ***/
+#define USE_FLASHFS
+#define USE_FLASH_M25P16
+#define M25P16_CS_PIN SPI3_NSS_PIN
+#define M25P16_SPI_BUS BUS_SPI3
+
+
+/*** Serial ports ***/
+#define USE_VCP
+// #define USE_UART_INVERTER
+
+#define USE_UART1
+#define UART1_TX_PIN PA9
+#define UART1_RX_PIN PA10
+
+#define USE_UART2
+#define UART2_TX_PIN PA2
+#define UART2_RX_PIN PA3
+
+#define USE_UART3
+#define UART3_TX_PIN PC10
+#define UART3_RX_PIN PC11
+
+#define USE_UART4
+#define UART4_TX_PIN PA0
+#define UART4_RX_PIN PA1
+
+#define USE_UART5
+#define UART5_TX_PIN PC12
+#define UART5_RX_PIN PD2
+
+
+#define SERIAL_PORT_COUNT 6
+
+/*** BARO & MAG ***/
+#define USE_BARO
+#define BARO_I2C_BUS BUS_I2C1
+#define USE_BARO_BMP280
+#define USE_BARO_SPL06
+#define USE_BARO_DPS310
+
+#define USE_MAG
+#define MAG_I2C_BUS BUS_I2C1
+#define USE_MAG_ALL
+
+/*** ADC ***/
+#define USE_ADC
+#define ADC_CHANNEL_1_PIN PC2
+#define ADC_CHANNEL_2_PIN PC1
+#define ADC_CHANNEL_3_PIN PC3
+
+#define VBAT_ADC_CHANNEL ADC_CHN_1 //PC2
+#define CURRENT_METER_ADC_CHANNEL ADC_CHN_2 //PC1
+#define RSSI_ADC_CHANNEL ADC_CHN_3 //PC3
+
+#define VBAT_SCALE_DEFAULT 1100
+#define CURRENT_METER_SCALE 206
+
+/*** LED STRIP ***/
+#define USE_LED_STRIP
+#define WS2811_PIN PB1
+
+/*** Default settings ***/
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+#define DEFAULT_RX_TYPE RX_TYPE_SERIAL
+#define SERIALRX_PROVIDER SERIALRX_SBUS
+#define SERIALRX_UART SERIAL_PORT_USART2
+
+
+#define DEFAULT_FEATURES (FEATURE_TX_PROF_SEL | FEATURE_OSD | FEATURE_CURRENT_METER | FEATURE_VBAT | FEATURE_TELEMETRY | FEATURE_SOFTSERIAL )
+
+/*** Timer/PWM output ***/
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+#define MAX_PWM_OUTPUT_PORTS 8
+#define USE_DSHOT
+#define USE_ESC_SENSOR
+
+
+/*** Used pins ***/
+#define TARGET_IO_PORTA 0xffff
+#define TARGET_IO_PORTB 0xffff
+#define TARGET_IO_PORTC 0xffff
+#define TARGET_IO_PORTD (BIT(2))