Ethernet Preemption - Showcase

[adamgeorge309]

Discuss the "Ethernet Preemption" showcase here. Ideas and recommendations are welcome.

[levy]

It might be true that this combination doesn't work in TsnDevice/TsnSwitch out of the box. Please check the example under showcases/tsn/framepreemption to see where the queue is in the preempting MAC layer. The queue needs to be placed under the sub MAC layers in order to operate correctly. Other than that, I think it should be fine. Best regards, levy

…

On Fri, Sep 9, 2022 at 4:36 PM mchsiao602107 ***@***.***> wrote: Hello everyone, I am trying to enable gating mechanism and frame preemption for a TSN network, but have trouble to configure TSNDevice and TsnSwitch when setting hasFramePreemption = true and hasEgressTrafficShaping = true at the same time. Frames are queued in *.*.eth[*].macLayer.queue, whose type is Ieee8021qTimeAwareShaper, and are not forwarded to the outboundClassifier to classify frames into either an express queue or a preemptable queue. Besides setting hasFramePreemption = true and hasEgressTrafficShaping = true, is there any other configuration required to enable time-aware shaper and frame preemption for TSN simultaneously? Thank you in advance. — Reply to this email directly, view it on GitHub <#676 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAA3OTI3E6RWGU7OGZ2TS3TV5NDQJANCNFSM42ZJ2NPA> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[pablomlu]

I also encountered the same problem when activating time-aware shaping and frame preemption in TsnSwitch. The packets do not seem to go through the network. Is there any solution for this? Thanks in advance.

[levy]

Checkout the latest INET master branch and see the showcases/combiningfeatures/fpandtas example.

[pablomlu]

Thanks a lot, very interesting example. It seems that the example works fine with two traffic classes. I wonder if it would be possible in the example to have an array of preemptableMacLayer.gate to have multiples gates or queues. Do you know if it this scenario can be configured? Thanks again.

[gimmyy]

Thanks for your great job! Would it be possible to provide a showcase with mixed features of FramePreemption, TAS, and CBS. It would conform to the TSN preemption mode even more. Thank you so much.

[anoikob]

Checkout the latest INET master branch and see the showcases/combiningfeatures/fpandtas example.

Ι copy pasted the ini code in a new ini file, under combiningfeatures/fpandtas (also a new folder) and got this error. I'm using omnet 6.0.3 and inet 4.5. Any ideas?

[levy]

Once I had a working example which contained multiple preemptable MAC layers. A lower priority MAC layer could be preempted by a higher priority one, even in a nested way where A is preempted by B, then B is preempted by C, then C finishes, then B finishes, and finally A finishes. IIRC, the complication is at the reassembly at the receiver, because it should be prepared for this nested preemption. There could be multiple frames preempted at different priorities and the received fragments should not be mixed up. Anyway, it's not possible to simply configure such a scenario right now, but with a bit of programming it could work.

[pablomlu]

Hi, just follow the showcases/combiningfeatures/fpandtas example available in the INET master branch and the mixed use of TAS and frame preemption should work.

[pablomlu]

The example can be found at github.com/inet-framework/inet/tree/master/showcases/tsn/combiningfeatures

[jafficy]

Thank you very much and have a great day！

[jafficy]

Excuse me again，When I run the fpandtas example .The following problems have arisen： Submodule queue: No module type named 'GatingQueue' found that implements module interface inet.queueing.contract.IPacketQueue (not in the loaded NED files?), at /home/bx/Desktop/omnetpp-6.0.1/samples/inet4.5/src/inet/linklayer/ethernet/modular/EthernetStreamingMacLayer.ned:37 -- in module (omnetpp::cModule) TsnLinearNetwork.client.eth[0].macLayer.expressMacLayer (id=116), during network setup

[levy]

This example is working in INET master only, it's not included in older versions.

[jafficy]

[jafficy]

Thank you very much for your reply！I'm running on the latest version with inet4.5.2,But the error is displayed,Which version can I use?

[levy]

I have already said: use the INET master branch from the GitHub repository.