Module inserted in A2 is shown as B2

[CoolCmd]

Configuration: one module is inserted into the second slot from CPU. According to MB manual this is slot A2. But ZenTimings displays it as B2 in the bottom left "combobox". See debug report in the attachment.
report.txt

Thanks for the great program. It is irreplaceable for overclocking memory!

[irusanov]

Hi,
What if you install the module on the outer slot (B2)?
Also, are you willing to check with the latest debug build (attached zip) from yesterday?
The report you've attached prints the second channel (B) as active, but this version has an issue with printing active channels, which should be fixed in the attached build.

ZenTimings_v1.33.1523-debug.zip

[CoolCmd]

i checked 1.33.1523. nothing changed. a2 is displayed as b2 and vise versa.
a2.txt
b2.txt

[irusanov]

Maybe it depends on topology, but shouldn't first channel be A and second - B? Based on the debug report, channel0 (first, as index start from 0) is labeled "B" from the motherboard and channel1 (second) is labelled "A". I think it was the same on my MSI B550 Unify-X. On the asus x670 board I have here they are labelled as the app expects.