English | 简体中文 | Deutsch | Français | Español
- Safety: Driving policies are not perfect and may crash the robot. Always make sure you operate in a safe environment! Keep in mind, that your phone could be damaged in a collision! Make sure you always have a game controller connected and are familiar with the key mapping so you can stop the vehicle at any time. Use at your own risk!
- Compute hardware: Training a driving policy requires a lot of resources and may slow down or even freeze your machine. It is recommended to use a high-end laptop or workstation with large amount of RAM and dedicated GPU, especially when training with larger batch sizes. The documentation is currently also not very detailed. Use at your own risk!
- Patience required: To get a good driving policy for your custom dataset will require some patience. It is not straight-forward, involves data collection, hyperparameter tuning, etc. If you have never trained machine learning models before, it will be challenging and may even get frustrating.
You first need to setup your training environment.
We recommend to create a conda environment for OpenBot. Instructions on installing conda can be found here. The easiest way to create a new environment with all dependencies is to use one of the provided environment files. On Windows, you will also need to install Microsoft C++ Build Tools. Make sure you are in the folder policy within your local OpenBot repository. Based on your operating system, run the corresponding command:
- MacOS:
conda env create -f environment_mac.yml - Windows:
conda env create -f environment_win.yml - Linux:
conda env create -f environment_linux.yml
For GPU support, make sure you also have the appropriate drivers installed. On Mac and Windows, everything should work out of the box. On Linux, you can install the drivers with the following command:
sudo apt-get install nvidia-driver-510
On Linux, you will probably also need to run the following to add cuda and cudnn to your path:
echo 'export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$CONDA_PREFIX/lib/' >> ~/.bashrc
source ~/.bashrc
Done! You are ready to train your own models. If this doesn't work for you, below are instructions for setting up such an environment manually.
First create a new conda environment with the following command:
conda create -n openbot pip python=3.9 -yNext, you need to activate your conda environment:
conda activate openbotIf this does not work (e.g. on Windows), you may need to activate the environment with activate openbot instead.
Once the environment is active, you need to install tensorflow. Note that training will be very slow on a laptop. So if you have access to a computer with dedicated GPU, we highly recommend to use it by installing the neccessary libraries; make sure you have recent GPU drivers installed. Below are the commands to install tensorflow for different operating systems.
conda install -c apple tensorflow-deps -y
pip install tensorflow-macos~=2.9.0
GPU support
pip install tensorflow-metal~=0.5.0
pip install tensorflow~=2.9.0
GPU support
sudo apt-get install nvidia-driver-510
conda install -c conda-forge cudatoolkit=11.2 cudnn=8.1 -y
echo 'export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$CONDA_PREFIX/lib/' >> ~/.bashrc
source ~/.bashrc
pip install tensorflow~=2.9.0
GPU support
conda install cudatoolkit=11.3 cudnn=8.2 -y
Make sure you are in the folder policy within your local OpenBot repository. Now, you can install all the remaining dependencies with the following command:
pip install -r requirements.txtYou can also install pydot (pip install pydot) and graphviz (see instructions) if you want to visualize the the network architecture.
If you want to use the WebApp for data collection and training, you need to install the following dependencies in addition. (On Mac, the brotlipy package is currently broken on pip, so you need to install it first using conda: conda install brotlipy=0.7)
pip install -r requirements_web.txtFor reference and troubleshooting, below is a list of the essential packages.
Training:
Web interface:
- Remember to activate the environment before running commands in the terminal:
conda activate openbot - If your tensorflow import does not work, try installing via
pip install tensorflow --user. (See this issue.)
In order to train an autonomous driving policy, you will first need to collect a dataset. The more data you collect, the better the resulting driving policy. For the experiments in our paper, we collected about 30 minutes worth of data. Note that the network will imitate your driving behaviour. The better and more consistent you drive, the better the network will learn to drive.
- Connect a bluetooth game controller to the phone (e.g. PS4 controller: to enter pairing mode press the PS and share buttons until the LED flashes quickly).
- Select the
CIL-Mobile-Cmdmodel in the app. - Now drive drive the car via a game controller and record a dataset. On the PS4 controller logging can be toggled with the X button.
You will now find a folder called Documents/OpenBot in the internal storage of your smartphone. For each recording, there will be zip file. The name of the zip file will be in the format yyyymmdd_hhmmss.zip corresponding to the timestamp of when the recording was started.
The Jupyter notebook expects a folder called dataset in the same folder. In this folder, there should be two subfolders, train_data and test_data. The training data is used to learn the driving policy. The test data is used to validate the learned driving policy on unseen data during the training process. This provides some indication how well this policy will work on the robot. Even though the robot may drive along the same route as seen during training, the exact images observed will be slightly different in every run. The common split is 80% training data and 20% test data. Inside the train_data and test_data folders, you need to make a folder for each recording session and give it a name such as my_openbot_1, my_openbot_2, etc. The idea here is that each recording session may have different lighting conditions, a different robot, a different route. In the Jupyter notebook, you can then train only on a subset of these datasets or on all of them. Inside each recording session folder, you drop all the recordings from that recording session. Each recording corresponds to an extracted zip file that you have transferred from the Openbot folder on your phone. Your dataset folder should look like this:
Rather than copying all files manually from the phone, you can also upload the logs automatically to a Python server on your computer. In this case, the zip files will be uploaded and unpacked into the folder dataset/uploaded. You will still need to move them into the folder structure for training. You can simply treat the uploaded folder as a recording session and move it into train_data. The recordings will then be recognized as training data by the Jupyter notebook. If you do not already have a recording session in the test_data folder, you also need to move at least one recording from train_data/uploaded into test_data/uploaded.
For better training performance, you can convert the collected dataset into a specialized format. You can create a tfrecord of the train and test datasets with the following commands:
conda activate openbot
python -m openbot.tfrecord -i dataset/train_data -o dataset/tfrecords -n train.tfrec
python -m openbot.tfrecord -i dataset/test_data -o dataset/tfrecords -n test.tfrecBy default this conversion will be done automatically at the start of training.
Make sure your conda environment for openbot is activated by executing the following command:
conda activate openbotWe provide a Jupyter Notebook that guides you through the steps for training an autonomous driving policy. Open the notebook with the following command.
jupyter notebook policy_learning.ipynbNow a web-browser window will open automatically and load the Jupyter notebook. Follow the steps in order to train a model with your own data.
This method assumes that the data is in the correct place. To adjust the hyperparameters you can pass the following arguments.
'--no_tf_record', action='store_true', help='do not load a tfrecord but a directory of files'
'--create_tf_record', action='store_true', help='create a new tfrecord'
'--model', type=str, default='pilot_net', choices=['cil_mobile', 'cil_mobile_fast', 'cil', 'pilot_net'], help='network architecture (default: cil_mobile)'
'--batch_size', type=int, default=16, help='number of training epochs (default: 16)'
'--learning_rate', type=float, default=0.0001, help='learning rate (default: 0.0001)'
'--num_epochs', type=int, default=10, help='number of epochs (default: 10)'
'--batch_norm', action='store_true', help='use batch norm'
'--flip_aug', action='store_true', help='randomly flip images and controls for augmentation'
'--cmd_aug', action='store_true', help='add noise to command input for augmentation'
'--resume', action='store_true', help='resume previous training'If your dataset has already been converted to a tfrecord, you can train the policy from the shell with the command:
python -m openbot.trainIf you would like to convert your dataset to a tfrecord, before training, you need to add the following flag:
python -m openbot.train --create_tf_recordIf you do not want to convert the dataset to a tfrecord, and train using the files direclty, you need to add the following flag:
python -m openbot.train --no_tf_recordTo train a model for final deployment, you want to use a large batch size and number of epochs. Enabling batch norm usually improves training as well. The model pilot_net is larger than the default cil_mobile but can achieve better performance on some tasks while still runnining in real time on most smartphones.
python -m openbot.train --model pilot_net --batch_size 128 --num_epochs 100 --batch_normAt the end of the training process, two tflite files are generated: one corresponds to the best checkpoint according to the validation metrics and the other to the last checkpoint. Pick one of them and rename it to autopilot_float.tflite. Replace the existing model in Android Studio and recompile the app.
If you are looking for the folder in your local directory, you will find it at: app/src/main/assets/networks.
We provide a web app and a python web server for easy policy training. (Beta)
- Automatic log (session) upload
- see Troubleshooting for details
- List uploaded sessions, with GIF preview
- List datasets, with basic info
- Move session to a dataset
- Delete session
- List trained models, and show plots about training
- Train a model with basic parameters, show progress bar
conda activate openbot
python -m openbot.serverYou can now open your browser to visualize the dataset and see incoming uploads by going to: http://localhost:8000/#/uploaded
You can run the python server with the command:
python -m openbot.serverThere is also a developer mode:
adev runserver openbot/serverFor frontend development (react app):
FE_DEV=1 adev runserver openbot/server
When you run the server you should see something like:
Skip address 127.0.0.1 @ interface lo
Found address 192.168.x.x @ interface wlp2s0
Registration of a service, press Ctrl-C to exit...
Running frontend: 0.7.0
Frontend path: /home/USERNAME/miniconda3/envs/openbot/lib/python3.7/site-packages/openbot_frontend
======== Running on http://0.0.0.0:8000 ========
(Press CTRL+C to quit)
If the upload to the server is not working, here are some troubleshooting tips:
- Try restarting the server (computer) and the OpenBot app (smartphone)
- Make sure the smartphone and your computer are connected to the same WiFi network
- If your router has both 2.4 GHz and 5 GHz networks with the same name, disable the 5 GHz network
- Keep the phone connected to Android Studio while running the app. In the Logcat tab, select Debug from the dropdown. Type
NSDinto the filter field to see the debug messages concerning the server connection. TypeUploadinto the filter field for debug messages concerning the recording file upload. - If a published models gets downloaded continiously, make sure the time on your phone and laptop / workstation are set correctly