appdefs.xml

<!--
Definitions for HandBrake docker container.

This file is used as data source to generate README.md and unRAID template files
from Jinja2 templates.
-->
<defs>
  <app>
    <id>3</id>
    <gui_type>x11</gui_type>
    <friendly_name>HandBrake</friendly_name>
    <name>{{ defs.app.friendly_name|lower|replace(' ', '-') }}</name>
    <project>
      <description>HandBrake is a tool for converting video from nearly any format to a selection of modern, widely supported codecs.</description>
      <url>https://handbrake.fr/</url>
    </project>
    <unraid>
      <support_url>https://forums.unraid.net/topic/57420-support-handbrake/</support_url>
      <category>MediaApp:Video</category>
      <extra_description>
[span style='color: red;'][b]NOTE:[/b][/span] For the container to have
access to your optical drive(s), you need to allow access to the proper
device (usually [b][i]/dev/sr0[/i][/b]) by adding the parameter
[b][i]--device DEV[/i][/b] in the [i]Extra Parameters[/i] field (shown when
[i]Advanced View[/i] is enabled). For example, if your optical drive is at
[b][i]/dev/sr0[/i][/b], you need to add [b][i]--device /dev/sr0[/i][/b].
      </extra_description>
    </unraid>
    <container>
      <overview>A fully automated mode is also available: drop files into a watch folder and let {{ defs.app.friendly_name }} process them without any user interaction.</overview>
      <rough_download_size>80MB</rough_download_size>
      <storage_permissions>ro</storage_permissions>
    </container>
    <!-- Extra stuff to be added to the documentation. -->
    <documentation>
      <section>
        <title level="2">Access to Optical Drive(s)</title>
        <content>
By default, a Docker container doesn't have access to host's devices.  However,
access to one or more device can be granted with the `--device DEV` parameter.

Optical drives usually have `/dev/srX` as device.  For example, the first drive
is `/dev/sr0`, the second `/dev/sr1`, and so on.  To allow HandBrake to access
the first drive, this parameter is needed:
```
--device /dev/sr0
```

To easily find devices of optical drives, start the container and look at its
log for messages similar to these ones:
```
...
[cont-init.d] 95-check-optical-drive.sh: executing...
[cont-init.d] 95-check-optical-drive.sh: looking for usable optical drives...
[cont-init.d] 95-check-optical-drive.sh: found optical drive /dev/sr0, but it is not usable because is not exposed to the container.
[cont-init.d] 95-check-optical-drive.sh: no usable optical drive found.
[cont-init.d] 95-check-optical-drive.sh: exited 0.
...
```

Since HandBrake can decrypt DVD video discs, their conversion can be performed
directly from the optical device.  From the graphical interface, click the
`Open Source` button and browse through the file system to find your optical
drive device (e.g. `/dev/sr0`).
        </content>
      </section>
      <section>
        <title level="2">Automatic Video Conversion</title>
        <content>
This container has an automatic video converter built-in.  This is useful to
batch-convert videos without user interaction.

Basically, files copied to the `/watch` container folder are automatically
converted by HandBrake to a pre-defined video format according to a pre-defined
preset.  Both the format and the preset are specified via environment variables:

| Variable       | Default |
|----------------|---------|
|`AUTOMATED_CONVERSION_PRESET` | "Very Fast 1080p30" |
|`AUTOMATED_CONVERSION_FORMAT` | "mp4" |

See the [Environment Variables](#environment-variables) section for details
about setting environment variables.

**NOTE**: Converted videos are stored to the `/output` folder of the container.

**NOTE**: All default presets, along with personalized/custom ones, can be seen
with the HandBrake GUI.

**NOTE**: The status and progression of conversions performed by the automatic
video converter can only be seen in the container's log.  It is not something
visible from the GUI.  Container's log can be obtained by executing the command
`docker logs handbrake`, where `handbrake` is the name of the container.  Also,
full details about the conversion are stored in `/config/log/hb/conversion.log`
(container path).
        </content>
      </section>
      <section>
        <title level="3">Multiple Watch Folders</title>
        <content>
If needed, up to 4 additionnal watch folders can be used:
  - `/watch2`
  - `/watch3`
  - `/watch4`
  - `/watch5`

This is useful in scenarios where videos need to be converted by different
presets.  For example, one could use a watch folder for movies and another watch
folder for TV shows, both having different encoding quality requirements.

By default, additional watch folders inherits the same settings has the main one
(`/watch`).  A setting for a particular watch folder can be overrided by adding
its index to the corresponding environment variable name.

For example, to set the HandBrake preset used to convert videos in `/watch2`,
the environment variable `AUTOMATED_CONVERSION_PRESET_2` is used.
`AUTOMATED_CONVERSION_PRESET_3` is used for `/watch3`, and so on.

All settings related to the automatic video converter can be overrided for each
additional watch folder:
  - `AUTOMATED_CONVERSION_PRESET`
  - `AUTOMATED_CONVERSION_FORMAT`
  - `AUTOMATED_CONVERSION_SOURCE_STABLE_TIME`
  - `AUTOMATED_CONVERSION_SOURCE_MIN_DURATION`
  - `AUTOMATED_CONVERSION_OUTPUT_SUBDIR`
  - `AUTOMATED_CONVERSION_KEEP_SOURCE`
        </content>
      </section>
      <section>
        <title level="3">Video Discs</title>
        <content>
The automatic video converter supports video discs, in the folllowing format:
  - ISO image file.
  - `VIDEO_TS` folder (DVD disc).
  - `BDMV` folder (Blu-ray disc).

Note that folder names are case sensitive.  For example, `video_ts`, `Video_Ts`
or `Bdmv` won't be treated as discs, but as normal directories.

Video discs can have multiple titles (the main movie, previews, extras, etc).
In a such case, each title is converted to its own file.  These files have the
suffix `.title-XX`, where `XX` is the title number. For example, if the file
`MyMovie.iso` has 2 titles, the following files would be generated:
  - `MyMovie.title-1.mp4`
  - `MyMovie.title-2.mp4`

It is possible to ignore titles shorted than a specific amount of time.  By
default, only titles longer than 10 seconds are processed.  This duration can be
adjusted via the `AUTOMATED_CONVERSION_SOURCE_MIN_DURATION` environment
variable.  See the [Environment Variables](#environment-variables) section for
details about setting environment variables.

When the source is a disc folder, the name of the converted video file will
match its parent folder's name, if any.  For example:

| Watch folder path       | Converted video filename |
|-------------------------|--------------------------|
| /watch/VIDEO_TS         | VIDEO_TS.mp4             |
| /watch/MyMovie/VIDEO_TS | MyMovie.mp4              |
        </content>
      </section>
      <section>
        <title level="3">Hooks</title>
        <content>
Custom actions can be performed using hooks.  Hooks are shell scripts executed
by the automatic video converter.

**NOTE**: Hooks are always invoked via `/bin/sh`, ignoring any shebang the
script may have.

Hooks are optional and by default, no one is defined.  A hook is defined and
executed when the script is found at a specific location.

The following table describe available hooks:

| Container location | Description | Parameter(s) |
|--------------------|-------------|--------------|
| `/config/hooks/pre_conversion.sh` | Hook executed before the beginning of a video conversion. | The first argument is the path of the converted video.  The second argument is the path to the source file.  Finally, the third argument is the name of the Handbrake preset that will be used to convert the video. |
| `/config/hooks/post_conversion.sh` | Hook executed when the conversion of a video file is terminated. | The first parameter is the status of the conversion.  A value of `0` indicates that the conversion terminated successfuly.  Any other value represent a failure.  The second argument is the path to the converted video (the output).  The third argument is the path to the source file.  Finally, the fourth argument is the name of the Handbrake preset used to convert the video. |

During the first start of the container, example hooks are installed in
`/config/hooks/`.  Example scripts have the suffix `.example`.  For example,
you can use `/config/hooks/post_conversion.sh.example` as a starting point.

**NOTE**: Keep in mind that this container has the minimal set of packages
required to run HandBrake.  This may limit actions that can be performed in
hooks.
        </content>
      </section>
      <section>
        <title level="3">Temporary Conversion Directory</title>
        <content>
A video being converted is written in a hidden, temporary directory under the
root of the output directory (`/output`).  Once a conversion successfully
terminates, the video file is moved to its final location.

This feature can be useful for scenarios where the output folder is monitored
by another application: with proper configuration, one can make sure this
application only "sees" the final, converted video file and not the transient
versions.

If the monitoring application ignores hidden directories, then nothing special
is required and the application should always see the final file.

However, if the monitoring application handles hidden directories, the automatic
video converter should be configured with the
`AUTOMATED_CONVERSION_OUTPUT_SUBDIR` environment variable sets to a
subdirectory.  The application can then be configured to monitor this
subdirectory.  For example, if `AUTOMATED_CONVERSION_OUTPUT_SUBDIR` is set to
`TV Shows` and `/output` is mapped to `$HOME/appvolumes/HandBrake` on the host,
`$HOME/appvolumes/HandBrake/TV Shows` should be monitored by the application.
application.
        </content>
      </section>
      <section>
        <title level="2">Intel Quick Sync Video</title>
        <content>
Intel Quick Sync Video is Intel's brand for its dedicated video encoding and
decoding hardware core.  It is a technology that is capable of offloading video
decoding and encoding task to the integrated GPU, thus saving the CPU usage to
do other tasks.  As a specialized hardware core on the processor die, Quick Sync
offers a much more power efficient video processing which is much superior to
video encoding on a CPU.

For HandBrake to be able to use hardware-accelerated encoding, the following are
required:

  - Have a compatible Intel processor.  To determine if your CPU has the Quick
    Sync Video hardware, consult this [list] from the [Intel Ark] website.  The
    model name of your processor is printed to the container's log during its
    startup.  Look for a message like this:
    ```
    [cont-init.d] 95-check-qsv.sh: Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
    ```
  - The Intel i915 graphic driver must be loaded on the **host**.
  - The `/dev/dri` device must be exposed to the container.  This is done by
    adding the `--device /dev/dri` parameter to the `docker run` command.

When Intel Quick Sync Video is properly enabled, HandBrake offers the following
video encoder:
```
H.264 (Intel QSV)
```

If this encoder is not part of the list, something is wrong and looking at the
container's log can give more details about the issue.

**NOTE**: In most cases, HandBrake can successfully access the `/dev/dri` device
without changing anything on the host side.  This is possible because the user
under which the container is running is automatically added to the group owning
the `/dev/dri` device.  However, this method doesn't work if the device is owned
by the group `root`.  The problem can be fixed using one of the following
methods:
  - Running the container as root (`USER_ID=0`).
  - Adding, on the host, read/write permissions for all to the `/dev/dri`
    device:
    ```
    sudo chmod a+wr /dev/dri/*
    ```
  - Changing, on the host, the group owning the `/dev/dri` device.  For example,
    to change the group to `video`:
    ```
    sudo chown root:video /dev/dri/*
    ```

[list]: https://ark.intel.com/Search/FeatureFilter?productType=processors&amp;QuickSyncVideo=true
[Intel Ark]: https://ark.intel.com
        </content>
      </section>
      <section>
        <title level="3">unRAID</title>
        <content>
The Intel i915 driver is already included in unRAID.  To automatically load the
driver during the startup of the host, the following lines must be added to
`/boot/config/go`:
```
# Load the i915 driver.
modprobe i915
```
        </content>
      </section>
      <section>
        <title level="2">Nightly Builds</title>
        <content>
{{ defs.app.friendly_name }} nightly builds are based on the latest development code, which means
they may or may not be stable.

The latest development version is available by using the `dev-latest` Docker
image tag.  For other specific development versions, look at available
[tags on Docker Hub].

When creating the container, the tag needs to be appended to the name of the
Docker image, like this:
```
docker run [OPTIONS..] jlesage/{{ defs.app.name }}:dev-latest
```

[tags on Docker Hub]: https://hub.docker.com/r/jlesage/{{ defs.app.name }}/tags/
        </content>
      </section>
      <section>
        <title level="2">Debug Builds</title>
        <content>
Debug builds can be used to better investigate problems that can occur with
{{ defs.app.friendly_name }}.  These builds have {{ defs.app.friendly_name }}
compiled in debug mode and all symbols are kept.

The main use case of debug builds is debugging a crash.  To do this, a core dump
needs to be generated when {{ defs.app.friendly_name }} crashes.  To make sure
this core dump is properly generated, two things are required:

  1. Core dumps must be enabled.  This is done by setting the maximum size of
     cores via the `--ulimit core=-1` parameter of the `docker run` command.
     A value of `-1` mean "unlimited".
  2. Location of the cores must be set.  This can be done by executing the
     following command on the **host**:
     ```
     echo 'CORE_PATTERN' | sudo tee /proc/sys/kernel/core_pattern
     ```
     Where `CORE_PATTERN` is the template that defines the naming of core dump
     files.  For example, to set the files in the configuration volume of the
     container (for easy retrieval from the host), use the pattern
     `/config/core.%e.%t`.

     **NOTE**: Because a core file contains the complete memory layout of an
     application, it is created with restrictive permissions.  If another user
     other than the one used to run {{ defs.app.friendly_name }} needs to access
     the core file, permissions must be changed by executing
     `chmod a+r CORE`, where `CORE` is the path to the core file.

     **NOTE**: Since the core dump files pattern is shared between the host and
     the container, you may want to revert to the original pattern once
     done.

     **NOTE**: The current value of the pattern can be obtained by executing
     `cat /proc/sys/kernel/core_pattern`.

Debug builds are available by using Docker image tags with the `debug` suffix.
Make sure to look at available [tags on Docker Hub].

When creating the container, the tag needs to be appended to the name of the
Docker image, like this:
```
docker run [OPTIONS..] jlesage/{{ defs.app.name }}:v1.14.3-debug
```

[tags on Docker Hub]: https://hub.docker.com/r/jlesage/{{ defs.app.name }}/tags/
        </content>
      </section>
      <section>
        <title level="3">unRAID</title>
        <content>
On systems running unRAID, the `--ulimit core=-1` parameter can be added to the
`Extra Parameters` field of the container settings.
        </content>
      </section>
    </documentation>
    <!-- Changelog of the application. -->
    <history>
      <release>
        <version>1.15.1</version>
        <date>2019-02-12</date>
        <change>Fixed issue where Intel QSV would not be setup properly when its associated Linux devices where having different owners.</change>
      </release>
      <release>
        <version>1.15.0</version>
        <date>2019-01-14</date>
        <change>Upgraded HandBrake to version 1.2.0.</change>
        <change>The automatic video converter now creates the output folder just before moving the video.</change>
      </release>
      <release>
        <version>1.14.11</version>
        <date>2018-12-10</date>
        <change>Fixed issue where libraries required to use Intel QSV would not be found.</change>
      </release>
      <release>
        <version>1.14.10</version>
        <date>2018-12-10</date>
        <change>Fixed issues related to usage of QSV on recent processors:</change>
        <change level="2">Added Intel Media driver version 18.3.0.</change>
        <change level="2">Upgraded Intel VAAPI driver to version 2.3.0.</change>
        <change level="2">Upgraded to Intel Media SDK to version 18.3.1.</change>
        <change level="2">Upgraded libva to version 2.3.0.</change>
        <change level="2">By default, the new Intel Media driver is now used.</change>
        <change level="2">For processors not supported by the Intel Media driver, use the Intel VAAPI driver.</change>
      </release>
      <release>
        <version>1.14.9</version>
        <date>2018-11-12</date>
        <change>The automatic video converter now processes older files first.</change>
        <change>Fixed an issue where the automatic video converter would fail to start when `USER_ID` is set to `0`.</change>
        <change>Do not setup supplementary group if device for Intel QSV is already accessible.</change>
        <change>Added a new log message for a scenario where Intel QSV would not work.</change>
      </release>
      <release>
        <version>1.14.8</version>
        <date>2018-09-19</date>
        <change>Now using baseimage v3.5.1, which brings the following changes:</change>
        <change level="2">Updated installed packages to get latest security fixes.</change>
      </release>
      <release>
        <version>1.14.7</version>
        <date>2018-09-11</date>
        <change>Upgraded to HandBrake version 1.1.2.</change>
        <change>Fixes to the automatic video converter:</change>
        <change level="2">Gracefully handle the case where the pre-conversion hook removes the source video file.</change>
        <change level="2">Skip unreadable files.</change>
        <change level="2">Drop root privileges at start.</change>
        <change level="2">Better handling of unexisting cache files.</change>
      </release>
      <release>
        <version>1.14.6</version>
        <date>2018-07-30</date>
        <change>Fixed an issue where the automatic video converter would fail to convert video with multiple titles.</change>
        <change>Make sure to apply the `HANDBRAKE_DEBUG` environment variable to the automatic video converter.</change>
      </release>
      <release>
        <version>1.14.5</version>
        <date>2018-07-19</date>
        <change>A video being converted is now written to a temporary directory before being moved to its final location.</change>
      </release>
      <release>
        <version>1.14.4</version>
        <date>2018-07-17</date>
        <change>Fixed an issue where HandBrake could crash while encoding a video using x264.</change>
      </release>
      <release>
        <version>1.14.3</version>
        <date>2018-07-16</date>
        <change>Added support for debug images.</change>
      </release>
      <release>
        <version>1.14.2</version>
        <date>2018-07-13</date>
        <change>Upgraded HandBrake to version 1.1.1.</change>
        <change>Reduced the size of the container image.</change>
      </release>
      <release>
        <version>1.14.1</version>
        <date>2018-07-12</date>
        <change>Fixed an issue where the automatic video converter would not be able to access the device required to enable Intel Quick Sync Video hardware-accelerated encoding.</change>
      </release>
      <release>
        <version>1.14.0</version>
        <date>2018-07-09</date>
        <change>Added support for Intel Quick Sync Video hardware-accelerated encoding.</change>
        <change>Now using baseimage v3.4.0, which is based on Alpine Linux 3.8.</change>
        <change>Fixed issue where selecting a different video encoder would result in incorrect video preset selection.</change>
        <change>Fixed an issue where the automatic video converter would choose an incorrect output subfolder when `SAME_AS_SRC` is used.</change>
        <change>Fixed an issue where the automatic video converter, during source cleanup, would try to remove the watch folder itself.</change>
        <change>Fixed an issue where the automatic video converter would choose an incorrect output filename when the source is a DVD/Blu-Ray folder.</change>
      </release>
      <release>
        <version>1.13.5</version>
        <date>2018-06-18</date>
        <change>Fixed nightly build.</change>
      </release>
      <release>
        <version>1.13.4</version>
        <date>2018-06-11</date>
        <change>Fixed nightly build.</change>
      </release>
      <release>
        <version>1.13.3</version>
        <date>2018-05-21</date>
        <change>Moved the HandBrake debug log under the proper directory.</change>
        <change>Fixed the nightly build.</change>
      </release>
      <release>
        <version>1.13.2</version>
        <date>2018-05-09</date>
        <change>Fixed issue where handling DVD structure would cause a crash.</change>
      </release>
      <release>
        <version>1.13.1</version>
        <date>2018-04-26</date>
        <change>Improved fix for FLAC encoder crash.</change>
      </release>
      <release>
        <version>1.13.0</version>
        <date>2018-04-09</date>
        <change>Upgraded HandBrake to version 1.1.0.</change>
      </release>
      <release>
        <version>1.12.0</version>
        <date>2018-03-22</date>
        <change>Added pre-conversion hook for the automatic video converter.</change>
        <change>Added support for creation of image based on the latest HandBrake development code.</change>
        <change>Switched to a baseimage based on Alpine Linux 3.7.</change>
      </release>
      <release>
        <version>1.11.5</version>
        <date>2018-03-02</date>
        <change>Now using baseimage v3.3.4, which brings the following changes (since last used version):</change>
        <change level="2">Make sure the log monitor is started after the X server.</change>
        <change level="2">Fixed an issue where the log monitor `yad` target would use XDG folders of the application.</change>
        <change level="2">Fixed issue where log monitor states were not cleared during container startup.</change>
      </release>
      <release>
        <version>1.11.4</version>
        <date>2018-03-01</date>
        <change>Since HandBrake doesn't work well with ffmpeg, reverted to libav.</change>
        <change>Thus, the FLAC encoder crash has been fixed in libav instead.</change>
        <change>Make sure the main window is always visible in background.</change>
      </release>
      <release>
        <version>1.11.3</version>
        <date>2018-02-13</date>
        <change>Fixed an issue where encoding audio to FLAC would cause a crash.</change>
        <change>Use AAC encoder from libavcodec.</change>
        <change>Fixed an issue where automatic conversion of a multi-titles medias would produce only the first one.</change>
        <change>Improved logging of the automatic video converter while processing multi-titles medias.</change>
      </release>
      <release>
        <version>1.11.2</version>
        <date>2018-02-03</date>
        <change>Now using baseimage v3.3.2, which brings the following changes:</change>
        <change level="2">Restored timezone support in Alpine Linux images with glibc.</change>
        <change level="2">Fixed issue in `add-pkg` helper where a package could be incorrectly detected as installed.</change>
      </release>
      <release>
        <version>1.11.1</version>
        <date>2018-01-30</date>
        <change>Now using baseimage v3.3.1, which brings the following changes:</change>
        <change level="2">Adjusted the way some ressources are accessed to better support reverse proxy to the container.</change>
      </release>
      <release>
        <version>1.11.0</version>
        <date>2018-01-22</date>
        <change>Now using baseimage v3.3.0, which brings the following changes (since last used version):</change>
        <change level="2">For Alpine Linux images with glibc, automatically update dynamic linker's cache after new libraries are installed.</change>
        <change level="2">Fixed the LANG environment variable not being set properly.</change>
        <change level="2">Added the ability to automatically install a CJK (Chinese/Japanese/Korean) font.</change>
      </release>
      <release>
        <version>1.10.0</version>
        <date>2018-01-18</date>
        <change>Added support for multiple watch folders.</change>
        <change>Added environment variable to set the interval at which the automatic video converter checks for new files.</change>
        <change>Source file and HandBrake preset name are now passed to the post hook script.</change>
      </release>
      <release>
        <version>1.9.4</version>
        <date>2018-01-11</date>
        <change>Now using baseimage v3.2.2, which brings the following changes (since last used version):</change>
        <change level="2">Upgraded S6 overlay to version 1.21.2.2.</change>
        <change level="2">Upgraded glibc to version 2.26 (Alpine Linux glibc images).</change>
        <change level="2">Adjusted the way ownership of /config is taken to better support cases where the folder is mapped to a network share.</change>
        <change>Small adjustment to the way ownership of files are taken.</change>
      </release>
      <release>
        <version>1.9.3</version>
        <date>2017-12-12</date>
        <change>Now using baseimage v3.1.4, which brings the following changes:</change>
        <change level="2">Set 2 worker processes for nginx.</change>
      </release>
      <release>
        <version>1.9.2</version>
        <date>2017-11-20</date>
        <change>Now using baseimage v3.1.3, which brings the following changes:</change>
        <change level="2">Upgraded S6 overlay to version 1.21.2.1.</change>
        <change>Better output of automated conversions: encoding progress now seen in container's log, while detailed output is redirected to a log file.</change>
      </release>
      <release>
        <version>1.9.1</version>
        <date>2017-11-07</date>
        <change>Now using baseimage v3.1.2, which brings the following changes (from last used version):</change>
        <change level="2">Fixed an issue where a self-disabled service could be restarted.</change>
        <change level="2">Upgraded S6 overlay to version 1.21.2.0.</change>
        <change level="2">Use a more efficient way to monitor status files.</change>
      </release>
      <release>
        <version>1.9.0</version>
        <date>2017-10-29</date>
        <change>Now using baseimage v3.1.0, which brings the following changes:</change>
        <change level="2">Upgraded S6 overlay to version 1.21.1.1.</change>
        <change level="2">Enhanced integration of service dependencies functionality.</change>
        <change level="2">Added a simple log monitor.</change>
        <change level="2">Fixed race condition where container's exit code would not be the expected one.</change>
        <change level="2">Fixed issue where application's GUI fails to displayed when accessing it through the web interface via standard ports 80/443.</change>
      </release>
      <release>
        <version>1.8.0</version>
        <date>2017-10-09</date>
        <change>Now using baseimage v3.0.2, which brings the following changes:</change>
        <change level="2">Better support for service dependencies.</change>
        <change level="2">Added support for secure access to the application's GUI.</change>
      </release>
      <release>
        <version>1.7.0</version>
        <date>2017-09-18</date>
        <change>Added support for optical drive(s) access.</change>
        <change>Removed some useless shortcuts in the video source selection window.</change>
      </release>
      <release>
        <version>1.6.1</version>
        <date>2017-09-08</date>
        <change>Now using baseimage v2.0.8, which brings the following changes (from last used version):</change>
        <change level="2">Fixed timezone support on alpine-glibc images.</change>
        <change level="2">Fixed duplicated entries in /etc/passwd and /etc/group that were created after a restart of the container.</change>
      </release>
      <release>
        <version>1.6.0</version>
        <date>2017-08-16</date>
        <change>Added libdvdcss to allow reading of encrypted DVD video files.</change>
      </release>
      <release>
        <version>1.5.9</version>
        <date>2017-08-14</date>
        <change>Now using baseimage v2.0.6, which brings the following changes:</change>
        <change level="2">Upgraded S6 overlay to version 1.20.0.0.</change>
      </release>
      <release>
        <version>1.5.8</version>
        <date>2017-08-12</date>
        <change>Fixed conversion of videos containing multiple titles.</change>
      </release>
      <release>
        <version>1.5.7</version>
        <date>2017-07-31</date>
        <change>Now using baseimage v2.0.5, which brings the following changes (from last used version):</change>
        <change level="2">Clear the environment of the container during startup.</change>
        <change level="2">Clear the /tmp folder during startup.</change>
        <change level="2">Cleanly terminate the X server when container is restarted/stopped.</change>
        <change level="2">Improved robustness of X server starting process.</change>
        <change level="2">Removed unneeded files from the image.</change>
      </release>
      <release>
        <version>1.5.6</version>
        <date>2017-07-27</date>
        <change>Watch folder: recursively remove empty directories.</change>
      </release>
      <release>
        <version>1.5.5</version>
        <date>2017-07-27</date>
        <change>Now using baseimage v2.0.3, which brings the following changes:</change>
        <change level="2">Improved robustness of the X server starting process.</change>
      </release>
      <release>
        <version>1.5.4</version>
        <date>2017-07-26</date>
        <change>Watch folder: properly support video discs (ISO files, DVD/Blu-ray folders).</change>
        <change>Watch folder: when removing empty folders, ignore the watch folder itself.</change>
        <change>Watch folder: make sure to abort if destination file already exists.</change>
      </release>
      <release>
        <version>1.5.3</version>
        <date>2017-07-25</date>
        <change>Fixed HandBrake CLI crash that was occuring when working with ISO files or DVD folders.</change>
        <change>Small adjustments to the default configuration file.</change>
      </release>
      <release>
        <version>1.5.2</version>
        <date>2017-07-23</date>
        <change>Now using baseimage v2.0.2, which brings the following changes:</change>
        <change level="2">Proper VNC port is exposed.</change>
      </release>
      <release>
        <version>1.5.1</version>
        <date>2017-07-18</date>
        <change>Now using baseimage v2.0.1, which brings the following changes:</change>
        <change level="2">Internal enhancements.</change>
        <change level="2">Clean temporary files left by npm.</change>
      </release>
      <release>
        <version>1.5.0</version>
        <date>2017-07-17</date>
        <change>Now using baseimage v2.0.0, which brings the following changes:</change>
        <change level="2">Various internal enhancements.</change>
        <change level="2">Fixed the way a service waits for another one.</change>
        <change>Watch folder: ignore hidden files and folders.</change>
        <change>Watch folder: adjusted the way empty folders are removed.</change>
      </release>
      <release>
        <version>1.4.0</version>
        <date>2017-07-04</date>
        <change>Watch folder: Make sure to respect the configured umask.</change>
        <change>Now using baseimage v1.5.0, which brings the following changes:</change>
        <change level="2">Added the UMASK environment variable to control how file permissions are set for newly created files.</change>
        <change level="2">Added the X11VNC_EXTRA_OPTS environment variable used to pass additional arguments to the x11vnc server.</change>
        <change level="2">By default, activate auto-scaling of application's window.</change>
        <change level="2">Applied latest Alpine Linux security updates.</change>
      </release>
      <release>
        <version>1.3.3</version>
        <date>2017-06-30</date>
        <change>Watch folder: Added handling of environment variable AUTOMATED_CONVERSION_OUTPUT_SUBDIR, which allows customization of the output location of automatically converted videos..</change>
        <change>The default source folder is now /storage.</change>
      </release>
      <release>
        <version>1.3.2</version>
        <date>2017-06-27</date>
        <change>Watch folder: also process files in subfolders.</change>
      </release>
      <release>
        <version>1.3.1</version>
        <date>2017-06-22</date>
        <change>Now using baseimage v1.4.3, which brings the following changes:</change>
        <change level="2">Updated Alpine Linux to version 3.6.2.</change>
      </release>
      <release>
        <version>1.3.0</version>
        <date>2017-06-21</date>
        <change>Now using baseimage v1.4.2, which brings the following changes (from last used version):</change>
        <change level="2">Switched to Alpine Linux 3.6.</change>
        <change level="2">Associate the application's icon to a unique version to avoid browser cache issues.</change>
        <change level="2">Fixed prefix of some service related messages.</change>
        <change level="2">Added support for supplying supplementary groups of the application.</change>
        <change level="2">Improved process startup and shutdown.</change>
        <change level="2">When container is stopped or restarted, processes are now terminated gracefully and in proper order. This allow the GUI application to execute its termination routine.</change>
        <change level="2">No more error messages when container is stopped or restarted.</change>
      </release>
      <release>
        <version>1.2.0</version>
        <date>2017-05-31</date>
        <change>Added support for post-conversion hook.</change>
      </release>
      <release>
        <version>1.1.4</version>
        <date>2017-05-30</date>
        <change>Now using baseimage v1.3.2, which brings the following changes:</change>
        <change level="2">Fixed password modal window not showing up when required.</change>
      </release>
      <release>
        <version>1.1.3</version>
        <date>2017-05-26</date>
        <change>Watch folder: Fixed issue where, after a first successful conversion, conversion of next available video files would not start.</change>
        <change>Renamed the 'Watch Folder' service to 'Automatic Video Converter'.</change>
      </release>
      <release>
        <version>1.1.2</version>
        <date>2017-05-24</date>
        <change>Watch folder: Changed the way files being transferred are detected. Method used previously was not working properly in all cases.</change>
      </release>
      <release>
        <version>1.1.1</version>
        <date>2017-05-24</date>
        <change>Watch folder: temporarily skip files being accessed/transferred.</change>
        <change>Watch folder: improved robustness.</change>
      </release>
      <release>
        <version>1.1.0</version>
        <date>2017-05-23</date>
        <change>Watch folder: properly support filenames containing spaces.</change>
        <change>Watch folder: added support for symbolic links.</change>
        <change>HandBrake debug can now be enabled via the HANDBRAKE_DEBUG environment variable.</change>
        <change>Take ownership of the `/output` folder.</change>
        <change>Added the ability to remove video source files from the watch folder after successfully conversion.</change>
      </release>
      <release>
        <version>1.0.1</version>
        <date>2017-05-18</date>
        <change>The watch folder is now monitored without inotify for better compatibility.</change>
      </release>
      <release>
        <version>1.0.0</version>
        <date>2017-05-18</date>
        <change>Initial release.</change>
      </release>
    </history>
  </app>
  <container>
    <!-- Environment variables -->
    <environment_variables>
      <environment_variable>
        <name>AUTOMATED_CONVERSION_PRESET</name>
        <description>HandBrake preset used by the automatic video converter.  See the [Automatic Video Conversion](#automatic-video-conversion) section for more details.</description>
        <default>Very Fast 1080p30</default>
        <unraid_template>
          <title>Automatic Video Converter: Preset</title>
          <description>Preset used by the automatic video converter.  Name of all available presets can be seen via the HandBrake GUI.</description>
          <display>always</display>
          <required>false</required>
          <mask>false</mask>
        </unraid_template>
      </environment_variable>
      <environment_variable>
        <name>AUTOMATED_CONVERSION_FORMAT</name>
        <description>Video container format used by the automatic video converter for output files.  This is typically the video filename extension.  See the [Automatic Video Conversion](#automatic-video-conversion) section for more details.</description>
        <default>mp4</default>
        <unraid_template>
          <title>Automatic Video Converter: Format</title>
          <description>Video container format used by the automatic video converter for output files.  This is typically the video filename extension.</description>
          <display>always</display>
          <required>false</required>
          <mask>false</mask>
        </unraid_template>
      </environment_variable>
      <environment_variable>
        <name>AUTOMATED_CONVERSION_KEEP_SOURCE</name>
        <description>When set to `0`, a video that has been successfully converted is removed from the watch folder.</description>
        <default>1</default>
        <unraid_template>
          <title>Automatic Video Converter: Keep Source Files</title>
          <description>Set to 0 to remove successfully converted videos from the watch folder, 1 to keep them.</description>
          <display>always</display>
          <required>false</required>
          <mask>false</mask>
        </unraid_template>
      </environment_variable>
      <environment_variable>
        <name>AUTOMATED_CONVERSION_OUTPUT_SUBDIR</name>
        <description>Subdirectory of the output folder into which converted videos should be written.  By default, this variable is not set, meaning that videos are saved directly into `/output/`.  If `Home/Movies` is set, converted videos will be written to `/output/Home/Movies`.  Use the special value `SAME_AS_SRC` to use the same subfolder as the source.  For example, if the video source file is `/watch/Movies/mymovie.mkv`, the converted video will be written to `/output/Movies/`.</description>
        <unraid_template>
          <title>Automatic Video Converter: Output Subdirectory</title>
          <description>Subdirectory of the output folder into which converted videos should be written.[ul][li]Leave value empty to save converted videos directly into [b][i]/output/[/i][/b].[/li][li]Use the special value [b][i]SAME_AS_SRC[/i][/b] to use the same subfolder as the source.  For example, if the video source file is [b][i]/watch/Movies/mymovie.mkv[/i][/b], the converted video will be written to [b][i]/output/Movies/[/i][/b].[/li][li]Use any subfolder name.  For example, setting the value [b][i]Home/Movies[/i][/b] will make converted videos written to [b][i]/output/Home/Movies[/i][/b]/[/li][/ul]</description>
          <display>always</display>
          <required>false</required>
          <mask>false</mask>
        </unraid_template>
      </environment_variable>
      <environment_variable>
        <name>AUTOMATED_CONVERSION_SOURCE_STABLE_TIME</name>
        <description>Time (in seconds) during which properties (e.g. size, time, etc) of a video file in the watch folder need to remain the same.  This is to avoid processing a file that is being copied.</description>
        <default>5</default>
        <unraid_template>
          <title>Automatic Video Converter: Source File Stable Time</title>
          <description>Time (in seconds) during which properties (e.g. size, time, etc) of a video file in the watch folder need to remain the same.  This is to avoid processing a file that is being copied.</description>
          <display>advanced</display>
          <required>false</required>
          <mask>false</mask>
        </unraid_template>
      </environment_variable>
      <environment_variable>
        <name>AUTOMATED_CONVERSION_SOURCE_MIN_DURATION</name>
        <description>Minimum title duration (in seconds).  Shorter titles will be ignored.  This applies only to video disc sources (ISO file, `VIDEO_TS` folder or `BDMV` folder).</description>
        <default>10</default>
        <unraid_template>
          <title>Automatic Video Converter: Minimum Title Duration</title>
          <description>Minimum title duration (in seconds).  Shorter titles will be ignored.  This applies only to video disc sources (ISO file, [i]VIDEO_TS[/i] folder or [i]BDMV[/i] folder).</description>
          <display>advanced</display>
          <required>false</required>
          <mask>false</mask>
        </unraid_template>
      </environment_variable>
      <environment_variable>
        <name>AUTOMATED_CONVERSION_CHECK_INTERVAL</name>
        <description>Interval (in seconds) at which the automatic video converter checks for new files.</description>
        <default>5</default>
        <unraid_template>
          <title>Automatic Video Converter: Check Interval</title>
          <display>advanced</display>
          <required>false</required>
          <mask>false</mask>
        </unraid_template>
      </environment_variable>
      <environment_variable>
        <name>HANDBRAKE_DEBUG</name>
        <description>Setting this to `1` enables HandBrake debug logging for both the GUI and the automatic video converter.  For the latter, the increased verbosity is reflected in `/config/log/hb/conversion.log` (container path).  For the GUI, log messages are sent to `/config/log/hb/handbrake.debug.log` (container path).  **NOTE**: When enabled, a lot of information is generated and the log file will grow quickly.  Make sure to enable this temporarily and only when needed.</description>
        <default/>
      </environment_variable>
    </environment_variables>
    <!-- Volumes -->
    <volumes>
      <volume>
        <container_path>/watch</container_path>
        <host_path_example>$HOME/HandBrake/watch</host_path_example>
        <description>This is where videos to be automatically converted are located.</description>
        <permissions>rw</permissions>
        <include_in_quick_start>true</include_in_quick_start>
        <unraid_template>
          <title>Watch Directory</title>
          <description>This is the watch folder of the automatic video converter.  Any video copied into this folder will be automatically converted by HandBrake.[br]Container path: /watch</description>
          <default/>
          <display>always</display>
          <required>false</required>
          <mask>false</mask>
        </unraid_template>
      </volume>
      <volume>
        <container_path>/output</container_path>
        <host_path_example>$HOME/HandBrake/output</host_path_example>
        <description>This is where automatically converted video files are written.</description>
        <permissions>rw</permissions>
        <include_in_quick_start>true</include_in_quick_start>
        <unraid_template>
          <title>Output Directory</title>
          <description>This is the default output folder for converted videos.  Also used by the automatic video converter.[br]Container path: /output</description>
          <display>always</display>
          <required>true</required>
          <mask>false</mask>
        </unraid_template>
      </volume>
    </volumes>
    <!-- Network ports -->
    <ports/>
    <!-- Devices -->
    <devices/>
    <!-- Extra parameters -->
    <extra_params/>
  </container>
</defs>