diff --git a/README.md b/README.md
index 863d26a..a640c65 100644
--- a/README.md
+++ b/README.md
@@ -2,31 +2,33 @@
 
 ## Overview
 
-Upgrade the Select Mini's Web UI and enable faster wifi file transfers.
+Upgrade the Malyan 200 or the Monoprice Select Mini's Web UI and enable faster Wi-Fi file transfers. Built using Bootstrap so the UI is mobile-friendly and tablet-friendly.
+
+While you want to update the UI of the printer, you don't want the web server on the controller working too hard. This upgrade is designed to minimize the amount of data the web server has to serve. You browser will be doing move of the heavy lifting.
 
 ## Getting Started
 
 1. Download and unzip `MP-Select-Mini-Web` from GitHub.
 2. Point a web browser window to your printer's IP address. `http://IPAddressHere`
-3. Now browser to the upgrade page. `http://IPAddressHere/up`
-4. On this upgrade page, there are three options. We are only concerned with the last one "Upload web." DO NOT CLICK THIS YET.
-5. Directly across from this button saying chose file. Click this button and select webui.html from the folder you unzipped earlier.
-6. NOW you can click the button to the lowest right that says "Upload web".
-6. If things worked, the response will display one word only. "OK" If you see that your good to go! 
-7. Usually it is good to power cycle your printer at this point.
-8. Once your printer is back on-line, browse to `http://IPAddressHere`. You should now have the upgraded web ui with full manual control. 
+3. Now browse to the upgrade page. `http://IPAddressHere/up`
+4. On the upgrade page, there are three options. We are only concerned with the last one, "Upload web." DO NOT CLICK THIS YET.
+5. On the same line as "Upload web" click "Choose file" and select the "webui.html" file from the folder you unzipped earlier.
+6. NOW you can click "Upload web."
+6. If things worked, the response will display one word only. If you see "OK" you are good to go! 
+7. It's recommended you power cycle your printer at this point.
+8. Once your printer is back online, browse to `http://IPAddressHere`. You should now have the upgraded web UI with full manual control. 
 
 ## Enable Faster Wifi File Transfers
 
-The final step is to speed up your wifi uploading by pasting, `M563 S6 ;` in the "send gCode to printer" box and hitting send.
+The final step is to speed up your Wi-Fi uploading by pasting, `M563 S6 ;` in the "send gCode to printer" box and hitting send. You will need to send that gcode after every power cycle, though.
 
 ## Troubleshooting
 
-Something broke? Here's how you can undo the Web UI upgrade.
+Did something break? Here's how you can undo the Web UI upgrade.
 
 1. Turn off the printer. Wait about 10 seconds, and then turn it back on.
-3. Once its on go DIRECTLY to `http://IPAddressHere/up`.
-4. Just click the "upload web" button with out chosing a file and it will restore the factory web ui.
+3. Once it's on go DIRECTLY to `http://IPAddressHere/up`.
+4. Just click the "Upload web" button without choosing a file and it will restore the factory web UI.
 
 ## Credits
 
diff --git a/screenshot.png b/screenshot.png
index 843557b..faf60a4 100644
Binary files a/screenshot.png and b/screenshot.png differ