esphome_deye.yaml

substitutions:
  device_name: deye

esphome:
  name: ${device_name}
  platformio_options:
    platform: https://github.com/platformio/platform-espressif32.git#feature/arduino-upstream
    platform_packages:
      - framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git#2.0.0
    build_flags: 
      - -DCONFIG_ARDUINO_LOOP_STACK_SIZE=32768

esp32:
  board: az-delivery-devkit-v4
  framework:
    type: arduino

wifi:
  ssid: !secret ssid
  password: !secret wifi_password
  manual_ip:
   static_ip: 192.168.123.224
   gateway: 192.168.123.1
   subnet: 255.255.255.0

logger:

api:
  encryption:
    key: "FtnkzgWnJDiSOgq8s58wT6ssx0jcduzWmPAPT4od7Wo="

ota:
  password: "6d93066ef45a27b0b0ebaeef5728de2f"

# web server
web_server:

switch:
  - platform: restart
    name: "Restart"

mqtt:
  broker: !secret broker
  port: !secret broker_port
  topic_prefix: deye_rs485
  username: !secret broker_username
  password: !secret broker_password
  log_topic:
    topic: debug
    level: NONE

uart:
  id: mod_bus
  baud_rate: 9600
  tx_pin: GPIO17  # TX2
  rx_pin: GPIO16  # RX2
  stop_bits: 1

modbus:
  id: modbus1

modbus_controller:
  - id: epever
    address: 1
    modbus_id: modbus1
    setup_priority: -10
    command_throttle: 0ms
    update_interval: 15s

sensor:
  - platform: wifi_signal
    name: "modbus rssi"
    update_interval: 3600s

  ############################# String ########################
    
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:solar-power
    name: "${device_name} string 1 watios"
    id: string1
    address: 186
    unit_of_measurement: "W"
    register_type: holding
    value_type: U_WORD
    #state_topic: Inverter/MPPT1_Watts
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:solar-power
    name: "${device_name} string 2 watios"
    #state_topic: Inverter/MPPT2_Watts
    id: string2
    address: 187
    unit_of_measurement: "W"
    register_type: holding
    value_type: U_WORD
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:solar-power
    name: "${device_name} string 1 voltaje"
    #state_topic: Inverter/MPPT1_Volts
    address: 109
    unit_of_measurement: "V"
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:solar-power
    name: "${device_name} string 2 volataje"
    #state_topic: Inverter/MPPT2_Volts
    address: 111
    unit_of_measurement: "V"
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:solar-power
    name: "${device_name} string 1 amperios"
    #state_topic: Inverter/MPPT1_Amps
    address: 110
    unit_of_measurement: "A"
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:solar-power
    name: "${device_name} string 2 amperios"
    #state_topic: Inverter/MPPT2_Amps
    address: 112
    unit_of_measurement: "A"
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1
  - platform: template
    name: "${device_name} produccion"
    #state_topic: Inverter/PvWattsTotal
    unit_of_measurement: "W"
        #            string1    +     string2      +   puerto gen
    lambda: |-
      return (id(string1).state + id(string2).state + id(gen).state); 
    accuracy_decimals: 0
    update_interval: 10s
      
  - platform: modbus_controller     #
    modbus_controller_id: epever    #
    icon: mdi:solar-power           #
    name: "${device_name} Gen watios"  ######## puerto gen
    id: gen                         #
    address: 166                    #
    unit_of_measurement: "W"        #
    register_type: holding          #
    value_type: U_WORD              #

 
########################### AC ##############

  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:transmission-tower-export
    name: "${device_name} Red"
    #state_topic: Inverter/GridWatts
    id: ${device_name}_red
    address: 170
    unit_of_measurement: "W"
    register_type: holding
    value_type: S_WORD
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:transmission-tower-export
    name: "${device_name} inverter outputs l1 power"
    address: 173
    unit_of_measurement: "W"
    register_type: holding
    value_type: S_WORD
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:transmission-tower-export
    name: "${device_name} voltaje"
    address: 150
    unit_of_measurement: "V"
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:transmission-tower-export
    name: "${device_name} amperios"
    address: 164
    unit_of_measurement: "A"
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.01
  # - platform: modbus_controller
  #   modbus_controller_id: epever
  #   icon: mdi:lightning-bolt-outline
  #   name: "${device_name} consumo casa 1"
  #   address: 176
  #   unit_of_measurement: "w"
  #   register_type: holding
  #   value_type: U_WORD
  # - platform: modbus_controller
  #   modbus_controller_id: epever
  #   icon: mdi:lightning-bolt-outline
  #   name: "${device_name} consumo casa 2"
  #   address: 177
  #   unit_of_measurement: "w"
  #   register_type: holding
  #   value_type: U_WORD
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:lightning-bolt-outline
    name: "${device_name} consumo casa"
    #state_topic: Inverter/LoadWatts
    address: 178
    unit_of_measurement: "W"
    register_type: holding
    value_type: U_WORD
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:thermometer
    id: temperatura
    name: "${device_name} temperatura"  ############### TEMPERATURA #############
    address: 91
    unit_of_measurement: "º"
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1
      - offset: -100
#    on_value_range:                     #
#      - above: 48                       #
#        then:                           #   esto hace activar el rele para 
#          - switch.turn_on: fan         #   encender y apagar el ventilador auxiliar
#      - below: 47                       #   enciende cuando sube de 48
#        then:                           #   apaga cuanda baja de 47
#          - switch.turn_off: fan        #

  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:transmission-tower-export
    name: "${device_name} frecuencia salida"
    address: 192
    unit_of_measurement: "hz"
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.01
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:transmission-tower-export
    name: "${device_name} frecuencia grid"
    address: 79
    unit_of_measurement: "hz"
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.01
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:solar-panel
    name: "${device_name} produccion diaria"
    address: 108
    unit_of_measurement: "KWh"
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:solar-panel
    name: "${device_name} produccion total"
    address: 96
    register_count: 2
    unit_of_measurement: "KWh"
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1

################# backup #######################

  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:transmission-tower-export
    name: "${device_name} Load voltaje"
    address: 157
    unit_of_measurement: "V"
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1

###################### Bateria ############################
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:thermometer
    name: "${device_name} DC temp"
    address: 90
    unit_of_measurement: "º"
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1
      - offset: -100
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:thermometer
    name: "${device_name} battery temp"
    address: 182
    unit_of_measurement: "º"
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1
      #- offset: -100 #Se elimina 
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} battery Voltaje"
    #state_topic: Inverter/BatteryVolts
    address: 183
    unit_of_measurement: "V"
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.01
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} battery soc"
    #state_topic: Inverter/BatterySOC
    address: 184
    unit_of_measurement: "%"
    register_type: holding
    value_type: U_WORD
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} battery power"
    #state_topic: Inverter/BatteryWatts
    address: 190
    id: battery_pow
    unit_of_measurement: "W"
    register_type: holding
    value_type: S_WORD
    filters:
        - multiply: -1
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} battery current"
    #state_topic: Inverter/BatteryAmps
    address: 191
    unit_of_measurement: "A"
    register_type: holding
    value_type: S_WORD
    accuracy_decimals: 2
    filters:
      - multiply: 0.01
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery-minus
    name: "${device_name} Total Battery Discharge"
    #state_topic: Inverter/BatteryDischarge
    address: 74
    unit_of_measurement: "kWh"
    device_class: energy
    state_class: total_increasing
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1
  
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery-plus
    name: "${device_name} Total Battery Charge"
    #state_topic: Inverter/BatteryCharge
    address: 72
    unit_of_measurement: "kWh"
    device_class: energy
    state_class: total_increasing
    register_type: holding
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1
     
                                          ########################### horarios #########################
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} sell mode time point1"   
    address: 250
    register_type: holding
    value_type: S_WORD
  # - platform: modbus_controller
  #   modbus_controller_id: epever
  #   icon: mdi:battery
  #   name: "${device_name} sell mode time point 1 voltaje"
  #   address: 262
  #   unit_of_measurement: "v"
  #   register_type: holding
  #   value_type: S_WORD
  #   accuracy_decimals: 1
  #   filters:
  #     - multiply: 0.01

  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} sell mode time point2"   ########################### horarios 2 #########################
    address: 251
    register_type: holding
    value_type: S_WORD
  # - platform: modbus_controller
  #   modbus_controller_id: epever
  #   icon: mdi:battery
  #   name: "${device_name} sell mode time point 2 voltaje"
  #   address: 263
  #   unit_of_measurement: "v"
  #   register_type: holding
  #   value_type: S_WORD
  #   accuracy_decimals: 1
  #   filters:
  #     - multiply: 0.01

  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} sell mode time point3"   ########################### horarios 3 #########################
    address: 252
    register_type: holding
    value_type: S_WORD
  # - platform: modbus_controller
  #   modbus_controller_id: epever
  #   icon: mdi:battery
  #   name: "${device_name} sell mode time point 3 voltaje"
  #   address: 264
  #   unit_of_measurement: "v"
  #   register_type: holding
  #   value_type: S_WORD
  #   accuracy_decimals: 1
  #   filters:
  #     - multiply: 0.01

  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} sell mode time point4"   ########################### horarios 4 #########################
    address: 253
    register_type: holding
    value_type: S_WORD
  # - platform: modbus_controller
  #   modbus_controller_id: epever
  #   icon: mdi:battery
  #   name: "${device_name} sell mode time point 4 voltaje"
  #   address: 265
  #   unit_of_measurement: "v"
  #   register_type: holding
  #   value_type: S_WORD
  #   accuracy_decimals: 1
  #   filters:
  #     - multiply: 0.01

  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} sell mode time point5"   ########################### horarios 5 #########################
    address: 254
    register_type: holding
    value_type: S_WORD
  # - platform: modbus_controller
  #   modbus_controller_id: epever
  #   icon: mdi:battery
  #   name: "${device_name} sell mode time point 5 voltaje"
  #   address: 266
  #   unit_of_measurement: "v"
  #   register_type: holding
  #   value_type: S_WORD
  #   accuracy_decimals: 1
  #   filters:
  #     - multiply: 0.01
 
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} sell mode time point6"   ########################### horarios 6 #########################
    address: 255
    register_type: holding
    value_type: S_WORD
  # - platform: modbus_controller
  #   modbus_controller_id: epever
  #   icon: mdi:battery
  #   name: "${device_name} sell mode time point 6 voltaje"
  #   address: 267
  #   unit_of_measurement: "v"
  #   register_type: holding
  #   value_type: S_WORD
  #   accuracy_decimals: 1
  #   filters:
  #     - multiply: 0.01

text_sensor:
  # - platform: modbus_controller
  #   modbus_controller_id: epever
  #   bitmask: 0
  #   icon: mdi:battery
  #   register_type: holding
  #   address: 189
  #   raw_encode: HEXBYTES
  #   name: "${device_name} battery status"
  #   lambda: |-
  #     uint8_t value = modbus_controller::word_from_hex_str(x, 0);
  #     switch (value) {
  #       case 0: return std::string("Cargando");
  #       case 1: return std::string("Stand-By");
  #       case 2: return std::string("Descargando");
  #       default: return std::string("Desconocido");
  #     }
  #     return x;
  - platform: template
    name: "${device_name} battery status"
    icon: mdi:battery
    lambda: |-
      if (id(battery_pow).state > 0) {
        return std::string("Cargando");
      } else if (id(battery_pow).state < 0) {
        return std::string("Descargando");
      } else if (id(battery_pow).state == 0) {
        return std::string("Stand-By");
      } else {
        return std::string("Desconocido");
      }
  # - platform: modbus_controller
  #   modbus_controller_id: epever
  #   bitmask: 0
  #   icon: mdi:lightning-bolt-outline
  #   register_type: holding
  #   address: 195
  #   raw_encode: HEXBYTES
  #   name: "${device_name} smartload Enabled status"
  #   lambda: |-
  #     uint8_t value = modbus_controller::word_from_hex_str(x, 0);
  #     switch (value) {
  #       case 0: return std::string("OFF");
  #       case 1: return std::string("ON");
  #       default: return std::string("Desconocido");
  #     }
  #     return x;
  #   skip_updates: 10
  - platform: modbus_controller
    modbus_controller_id: epever
    bitmask: 0
    register_type: holding
    address: 194
    raw_encode: HEXBYTES
    name: "${device_name} Grid status"
    lambda: |-
      uint8_t value = modbus_controller::word_from_hex_str(x, 0);
      switch (value) {
        case 0: return std::string("OFF-Grid");
        case 1: return std::string("ON-Grid");
        default: return std::string("Desconocido");
      }
      return x;
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:home-lightning-bolt
    bitmask: 0
    register_type: holding
    address: 59 
    raw_encode: HEXBYTES
    name: "${device_name} Running Status"
    lambda: |-
      uint8_t value = modbus_controller::word_from_hex_str(x, 0);
      switch (value) {
        case 0: return std::string("Stand-by");
        case 1: return std::string("Self-checking");
        case 2: return std::string("Normal");
        case 3: return std::string("Fallo");
        default: return std::string("Desconocido");
      }
      return x;
    skip_updates: 10
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:home-lightning-bolt
    bitmask: 0
    register_type: holding
    address: 244   #244,247
    raw_encode: HEXBYTES
    name: "${device_name} Work mode"
    lambda: |-
      uint8_t value = modbus_controller::word_from_hex_str(x, 0);
      switch (value) {
        case 0: return std::string("Selling First");
        case 1: return std::string("Zero-Export to Load & Solar Sell");
        case 2: return std::string("Zero-Export to Home & Solar Sell");
        case 3: return std::string("Zero-Export to Load");
        case 4: return std::string("Zero-Export to Home");
        default: return std::string("Desconocido");
      }
      return x;
    skip_updates: 10
      
number:
  - platform: modbus_controller
    modbus_controller_id: epever
    name: "${device_name} limiti maximo power"
    address: 245
    unit_of_measurement: "Kw"
    register_type: holding
    value_type: U_WORD
    use_write_multiple: true
    skip_updates: 10
  - platform: modbus_controller
    modbus_controller_id: epever
    name: "${device_name} Bateria capacidad"
    address: 204
    unit_of_measurement: "AH"
    register_type: holding
    value_type: U_WORD
    use_write_multiple: true
    skip_updates: 10
  - platform: modbus_controller
    modbus_controller_id: epever
    name: "${device_name} Max cargar"
    address: 210
    unit_of_measurement: "A"
    register_type: holding
    value_type: U_WORD
    use_write_multiple: true
    skip_updates: 10
  - platform: modbus_controller
    modbus_controller_id: epever
    name: "${device_name} Max descargar"
    address: 211
    unit_of_measurement: "A"
    register_type: holding
    value_type: U_WORD
    use_write_multiple: true
    skip_updates: 10

  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} point1 capacity"
    address: 268
    unit_of_measurement: "%"
    register_type: holding
    value_type: S_WORD
    use_write_multiple: true
    skip_updates: 10
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} sell mode time point1 power"
    address: 256
    unit_of_measurement: "W"
    register_type: holding
    use_write_multiple: true
    value_type: S_WORD
  # - platform: modbus_controller
  #   modbus_controller_id: epever
  #   icon: mdi:battery
  #   name: "${device_name} sell mode time point 1 voltaje"
  #   address: 262
  #   unit_of_measurement: "v"
  #   register_type: holding
  #   value_type: S_WORD
  #   use_write_multiple: true
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} point2 capacity"
    address: 269
    unit_of_measurement: "%"
    register_type: holding
    value_type: S_WORD
    use_write_multiple: true
    skip_updates: 10
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} sell mode time point2 power"
    address: 257
    unit_of_measurement: "W"
    register_type: holding
    use_write_multiple: true
    value_type: S_WORD
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} point3 capacity"
    address: 270
    unit_of_measurement: "%"
    register_type: holding
    value_type: S_WORD
    use_write_multiple: true
    skip_updates: 10
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} sell mode time point3 power"
    address: 258
    unit_of_measurement: "W"
    register_type: holding
    use_write_multiple: true
    value_type: S_WORD
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} point4 capacity"
    address: 271
    unit_of_measurement: "%"
    register_type: holding
    value_type: S_WORD
    use_write_multiple: true
    skip_updates: 10
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} sell mode time point4 power"
    address: 259
    unit_of_measurement: "W"
    register_type: holding
    use_write_multiple: true
    value_type: S_WORD
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} point5 capacity"
    address: 272
    unit_of_measurement: "%"
    register_type: holding
    value_type: S_WORD
    use_write_multiple: true
    skip_updates: 10
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} sell mode time point5 power"
    address: 260
    unit_of_measurement: "W"
    register_type: holding
    use_write_multiple: true
    value_type: S_WORD
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} point6 capacity"
    address: 273
    unit_of_measurement: "%"
    register_type: holding
    value_type: S_WORD
    use_write_multiple: true
    skip_updates: 10
  - platform: modbus_controller
    modbus_controller_id: epever
    icon: mdi:battery
    name: "${device_name} sell mode time point6 power"
    address: 261
    unit_of_measurement: "W"
    register_type: holding
    use_write_multiple: true
    value_type: S_WORD

select:
  - platform: modbus_controller
    name: "${device_name} Excedentes"
    address: 247
    value_type: U_WORD
    optionsmap:
      "No Vender": 0
      "Vender": 1
    use_write_multiple: true
    skip_updates: 10
    
  - platform: modbus_controller
    name: "${device_name} point1 charge enable"
    address: 274
    value_type: U_WORD
    optionsmap:
      "GM": 4
      "BU": 8
      "CH": 16
    use_write_multiple: true
    skip_updates: 10
  - platform: modbus_controller
    name: "${device_name} point2 charge enable"
    address: 275
    value_type: U_WORD
    optionsmap:
      "GM": 4
      "BU": 8
      "CH": 16
    use_write_multiple: true
    skip_updates: 10
  - platform: modbus_controller
    name: "${device_name} point3 charge enable"
    address: 276
    value_type: U_WORD
    optionsmap:
      "GM": 4
      "BU": 8
      "CH": 16
    use_write_multiple: true
    skip_updates: 10
  - platform: modbus_controller
    name: "${device_name} point4 charge enable"
    address: 277
    value_type: U_WORD
    optionsmap:
      "GM": 4
      "BU": 8
      "CH": 16
    use_write_multiple: true
    skip_updates: 10
  - platform: modbus_controller
    name: "${device_name} point5 charge enable"
    address: 278
    value_type: U_WORD
    optionsmap:
      "GM": 4
      "BU": 8
      "CH": 16
    use_write_multiple: true
    skip_updates: 10
  - platform: modbus_controller
    name: "${device_name} point6 charge enable"
    address: 279
    value_type: U_WORD
    optionsmap:
      "GM": 4
      "BU": 8
      "CH": 16
    use_write_multiple: true
    skip_updates: 10

############## Rele para el ventilador auxiliar ########################

#  - platform: gpio
#    pin: GPIO2
#    id: relay
#  - platform: template
#    icon: "mdi:fan"
#    id: fan
#    name: "Fan inversor"
#    turn_on_action:
##    - switch.template.publish:
#        id: fan
#        state: on
#    - switch.turn_on: relay
#    turn_off_action:
#    - switch.turn_off: relay
#    - switch.template.publish:
#        id: fan
#        state: off