Skip to content
This repository has been archived by the owner on May 12, 2021. It is now read-only.

Latest commit

 

History

History
321 lines (228 loc) · 13.4 KB

TRACING.md

File metadata and controls

321 lines (228 loc) · 13.4 KB
Raw

Agent Tracing

Introduction

This document explains agent tracing, which uses the Jaeger implementation of the OpenTracing API.

OpenTracing summary

An OpenTracing-enabled application creates trace "spans". A span must contain the following attributes:

  • A name
  • A pair of timestamps (recording the start time and end time of some operation)
  • A reference to the span's parent span

All spans need to be finished, or completed, to allow the OpenTracing framework to generate the final trace information.

Jaeger tracing architecture

The kata-agent makes use of the Jaeger golang client package.

The Jaeger architecture means that the Jaeger client code running in the application reports all span information to a Jaeger agent. This agent forwards the information on to other components of a Jaeger system.

The Jaeger client package bound into the application sends the trace spans to the Jaeger agent process using the UDP protocol. This is problematic since it is not desirable to run a jaeger-agent process inside the Virtual Machine (VM):

  • Adding extra binaries and an extra service to run the Jaeger agent inside the VM increases the size of the guest OS image used to create the VM. This is not desirable as the image should be as small as possible.

  • Adding a Jaeger agent process into the VM would require special-case code for handling running the kata-agent as the init daemon.

To avoid this complication, agent tracing uses a VSOCK communication channel to allow the kata-agent to talk to the Jaeger agent running on the host system ("outside" the VM).

Guest to Host communication using VSOCK

Since Jaeger does not yet support VSOCK, it is necessary to provide a way for the Jaeger client code (running inside the kata-agent in the VM), to connect to the Jaeger agent (running on the host). The default Jaeger port for such communications is UDP port 6831.

The required redirection is a achieved using two instances of the socat(1) network utility:

  • The first instance runs in the guest environment in the VM and forwards all Jaeger trace traffic out of the VM using a VSOCK socket.

  • The second instance runs in the host environment and forwards all Jaeger traffic from the VSOCK socket to the Jaeger agent's UDP port.

Further details:

Name Type Environment Summary Details Explanation
jaeger-client-socat-redirector.service systemd service Guest Guest UDP:6831 to guest VSOCK:6831 Redirects data sent to UDP port 6831 to the host context VSOCK socket on port 6831. Service that intercepts all Jaeger calls the Kata agent makes and redirects them to the Jaeger agent running in the host environment.
vsock-to-udp-server.sh shell script Host Host VSOCK:6831 to host UDP:6831 Redirects all host context VSOCK data on port 6831 to the Jaeger agent, which is listening on UDP port 6831. Forwards all Jaeger agent calls redirected from the Kata agent to the Jaeger agent.

Note:

This is a temporary solution until Jaeger supports VSOCK natively.

For tracing to work, the host system must have a Jaeger agent running.

Agent tracing terminology

Trace modes

The agent supports two different tracing modes:

Trace mode Description Use-case VM shutdown controller Limitations
Static Traces from agent start to agent shutdown. Obtain holistic view of agent activities. Agent Requires systemd - see section Agent shutdown behaviour.
Dynamic Traces begin when the gRPC StartTracing() API is called and end when the corresponding StopTracing() API is called. on-demand (partial) tracing. Runtime Only "isolated" type supported.

Trace types

Each trace mode is sub-divided into two different types:

Trace type Description Use-case Notes
isolated The traces only apply to the agent; after the container has been destroyed, the first span will start at agent startup and the last at agent shutdown Observing agent lifespan.
collated In this mode, spans are associated with their kata-runtime initiated counterparts. Understanding how the runtime calls the agent. Requires runtime tracing to be enabled in configuration.toml (enable_tracing=true).

Agent shutdown behaviour

As shown in the trace modes section, the different trace modes change how the VM is shutdown. In normal operation, the kata-runtime manages the VM shutdown. The only scenario the agent itself is responsible for VM shutdown is if static tracing is enabled. In this scenario, the agent finishes the trace spans and actually exits. The systemd unit that launches the kata-agent detects this and then runs the ExecStop= commands, which shutdown the VM.

Note: This implies that currently systemd is required for static tracing. However, it is not a hard requirement. The agent can be modified to invoke the ExecStop= commands itself to avoid relying on systemd to handle VM shutdown.

Enabling tracing

Enabling dynamic tracing

Call the gRPC StartTracing() API to start tracing and the corresponding StopTracing() API to stop tracing.

Note: The dynamic tracing mode will always use an isolated type.

Enabling static tracing

Static tracing is enabled by adding the agent.trace option in the guest kernels command line.

Static tracing options

Tracing support in the agent is either disabled, or set to one of the following:

Trace type Trace setting
"isolated" agent.trace=isolated (or just agent.trace)
"collated" agent.trace=collated

Note:

Agent tracing is separate from the tracing for other Kata Containers components. It is not necessary to enable runtime tracing if you want to enable agent tracing (or vice versa). However, "collated" mode only works as documented if runtime tracing is enabled.

Running the agent with tracing enabled

  1. Build a custom non-initrd image using osbuilder.

    • The image must include:

      • The jaeger-client-socat-redirector.service systemd service (see the Guest to Host communication using VSOCK section). This service should be placed at /usr/lib/systemd/system/ of the rootfs. It is necessary to perform the following command within the rootfs context:

        $ sudo -E chroot ${rootfs} systemctl enable jaeger-client-socat-redirector.service

      • The distribution-specific package including the socat(1) utility (normally the package is called socat).

        The utility is required for the jaeger-client-socat-redirector.service service.

    • The image can include:

      • The kata-journald-host-redirect.service service. (see the Guest to Host communication using VSOCK section). This service should be placed at /usr/lib/systemd/system/ of the rootfs. It is necessary to perform the following command within the rootfs context:

        $ sudo -E chroot ${rootfs} systemctl enable kata-journald-host-redirect.service

      • The kata-redirect-agent-output-to-journal.conf systemd snippet (see the Guest to Host communication using VSOCK section). This configuration file should be placed at /etc/systemd/system/kata-agent.service.d/ of the rootfs. It is necessary to perform the following command:

        $ install -o root -g root -m 0440 kata-redirect-agent-output-to-journal.conf ${rootfs}/etc/systemd/system/kata-agent.service.d

  2. Install the custom image.

  3. Configure the runtime to use the custom image by modifying the image= option in the runtime's configuration.toml file.

  4. Configure the runtime to set the correct kernel parameters for agent tracing. See:

  5. Install and run Jaeger on the host.

    The simplest method to start using Jaeger is to follow the instructions to run the "all-in-one" Docker* image.

  6. Start the VSOCK Jaeger redirector script on the host:

    $ sudo scripts/vsock-to-udp-server.sh

  7. Start the journal redirector script on the host (OPTIONAL):

    $ sudo scripts/vsock-to-text-server.sh

  8. Create a Kata Container.

  9. Stop the Kata Container.

  10. View the Jaeger UI.

Requirements

Host environment

  • Host kernel must support the VSOCK socket type:

    kernel config option: CONFIG_VHOST_VSOCK.

  • VSOCK kernel module must be loaded:

    $ sudo modprobe vhost_vsock

  • VSOCK support must be enabled in the kata-runtime's configuration.toml config file:

    $ sudo sed 's/#use_vsock =.*/use_vsock = true/g' /usr/share/defaults/kata-containers/configuration.toml

Guest environment

  • Guest kernel must support the VSOCK socket type:

    kernel config option: CONFIG_VIRTIO_VSOCKETS.

Limitations

  • The image configured in the kata-runtime configuration.toml file must be specified using image= (initrd= is not supported).

    This is because, currently, additional systemd services have to run inside the VM in order to proxy the Jaeger trace flows out to the Jaeger collector running on the host.

    See the Guest to Host communication using VSOCK section for further details.

  • Tracing is only completed when the workload and the kata-agent have exited

    Although trace information can be inspected before the workload and agent have exited, it is incomplete. This is shown as <trace-without-root-span> in the Jaeger UI.

    If the workload is still running, the trace transaction -- which spans the entire runtime of the kata-agent -- will not have been completed. To view the complete trace details, first stop the Kata Container.

Appendix - Setting up a tracing development environment

If you want to debug, further develop, or test tracing, use the following steps.

Set up a debug console

This allows direct shell access to the container.

See the developer guide for further details.

Guest journal redirector

Since agent tracing requires VSOCK, and enabling VSOCK in configuration.toml disables the kata-proxy (not required), the Kata Container has no way to display the guest OS journal messages, which are normally redirected through the proxy. This makes debugging difficult. To overcome this issue, create another pair of socat(1) instances to redirect the guest OS journal entries to a socat(1) instance running on the host:

Name Type Environment Summary Details
kata-journald-host-redirect.service systemd service Guest Guest UDP:514 to host VSOCK:5140 Redirects data sent to the syslog port to a VSOCK socket port.
kata-redirect-agent-output-to-journal.conf systemd snippet Guest Capture agent output Redirects all agent output to the journal, required to observe agent output on host as no kata-proxy is running.
vsock-to-text-server.sh shell script Host Host VSOCK:5140 to stdout Redirects all host context VSOCK data on port 5140 to standard output for easy viewing.

Enable full agent debug

The usual full debug options need to be supplemented with a few systemd(1) options for the journal redirector to work:

kernel_params = "systemd.log_level=debug systemd.journald.forward_to_syslog=1 systemd.journald.forward_to_wall=0 systemd.journald.forward_to_console=0 systemd.log_target=journal ..."