You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
The screw hole in the bin is an ISO Metric Profile, 15.0mm size, M15x1.5 designation, 6H class hole. There is an offset to the thread faces of 0.125mm to provide a little bit of slop to make it easier to secure the thumbscrew.
Hi @TechyShishy, see the above pull request if you want these screw holes as an option. I didn't use the provided STL - it didn't play well with OpenSCAD when performing a difference() operation. I've used the threads-scad library instead. I didn't include the 0.125mm offset as it didn't seem necessary based on my test prints (unless it's somehow included in the threads-scad library). Hope it works for you!
The stl of the screw hole in case you want to import() it:
https://files.printables.com/media/prints/413761/stls/3590032_b22e71f5-c9dc-4873-9745-da7f4e5e899a/bin-screw-hole.stl
The author describes it as such:
https://www.printables.com/model/413761-gridfinity-refined
The text was updated successfully, but these errors were encountered: