Skip to content

Latest commit

 

History

History
118 lines (91 loc) · 3.02 KB

README.md

File metadata and controls

118 lines (91 loc) · 3.02 KB
Raw

dns-spoofer

✔️ Send spoofed DNS queries

✔️ IP layer

✔️ UDP layer

Installation

To install:

pip install dns-spoofer

If you want to make sure you get the latest changes from Github:

pip install git+https://github.com/kimbo/dns-spoofer.git

Now you'll have two commands available to run:

  • dns-spoof - send DNS queries with a different source port and source IP address than your own.
  • dns-listen - listen for and print UDP packets (i.e. DNS queries) on a port and address

Quick example

This will be a little bit cooler if you have access to two different computers on the same network, but it'll work just the same on just one.

Step #1:

Open up a terminal and run:

$ dns-listen 53535
Listening on port 53535 and address ...

You can replace 53535 with whatever port number you want (I'd recommend one bigger than 1024).

Note that the address is blank (meaning we're listening on all addresses).

If you have two computers, take note of the first computer's IP address (look into ip addr, or ifconfig if you're on a Mac)

Step #2

If you have two computers, you'll need the IP address from your first machine here:

$ dns-spoof example.com 1.1.1.1 --sport 53535 --src-addr <IP-address-here>

Otherwise, if you're doing this on one computer, run:

$ dns-spoof example.com 1.1.1.1 --sport 53535

Your output after running dns-spoof should look something like this:

(query) 192.168.0.25#53535 --> 1.1.1.1#53, "example.com" type "A"

### QUERY TIME: 0.00028133392333984375

Soon after running dns-spoof, look at the terminal you were running dns-listen on. It should have printed out something like this:

Got 45 bytes from ('1.1.1.1', 53)
id 62725
opcode QUERY
rcode NOERROR
flags QR RD RA
;QUESTION
example.com. IN A
;ANSWER
example.com. 3574 IN A 93.184.216.34
;AUTHORITY
;ADDITIONAL

Congratulations! You just sent a spoofed DNS query 😄

Usage for dns-spoof

$ dns-spoof -h
usage: dns-spoof [-h] [--dport DST_PORT] [--src-addr SRC_ADDR]
                 [--sport SRC_PORT] [-t RDTYPE] [-n NUM_QUERIES]
                 qname dst_addr

positional arguments:
  qname
  dst_addr              The address to send the DNS query to

optional arguments:
  -h, --help            show this help message and exit
  --dport DST_PORT, --destintaion-port DST_PORT
  --src-addr SRC_ADDR, --source-address SRC_ADDR
  --sport SRC_PORT, --source-port SRC_PORT
  -t RDTYPE, --rdtype RDTYPE
  -n NUM_QUERIES, --num-queries NUM_QUERIES

Usage for dns-listen

$ dns-listen -h
usage: dns-listen [-h] [--addr ADDRESS] port

positional arguments:
  port

optional arguments:
  -h, --help            show this help message and exit
  --addr ADDRESS, --address ADDRESS

Disclaimers

  • I've only tested this from behind a NAT.
  • Only works with UDP and IPv4
  • I'm not responsible for what you do with this.

License

see LICENSE