example_layout.yaml

#
# Example layout file for the TG165 Firmware Composer (compose-fw.py)
#

# The original_firmware value specifies the path to the firmware update file
# that our new firmware should be based off of. This is the default firmware
# that will be booted if the OK button is not pressed during power on.
# (It is always assumed to be in the FLIR update.bin format, and with a load
#  address of 0x08010000.)
original_firmware: Upgrade.orig.bin

# The entry_point value specifies the address at which the given program should
# start. This is typically the load address of the raw "boot selector" binary.
entry_point: 0x08050000

# The input array contains all of the files that will be merged into the
# provided firmware image. Typically, this contains at least your boot
# selector binary.
input:

  # Each YAML entry (starting with the '-') represents a file that will be
  # merged into our firmware image. Entries can have the following properties:
  #
  # filename -- Required. Points to the file that contains our firmware.
  # load_address -- Required. The address at which the given firmware image
  #     should be loaded.
  # format: -- Optional; defaults to 'binary'. The format of our input binary.
  #     Can be 'binary' (raw binary) or 'upgrade.bin' (FLIR upgrade format).
  # entry_point -- Required for bare binaries; ignored for others. Specifies
  #     the entry point address of the binary. (We can't infer this from the
  #     vector table if the file has no vector table!)
- filename: boot_select/bootsel.bin
  load_address: 0x08050000
  format: binary

  # Subsequent entries start with another '-'. You can have as many as you'd like.
- filename: alt_bootloader/usbdfu.bin
  load_address: 0x08050100
  format: binary

- filename: bootloader_extractor/extractor.bin
  format: binary
  load_address: 0x08053000


# The output array contains a list of output files that should be created.
# Each entry should have the following properties:
#
# filename -- Required. The target file type to be produced.
# format -- Required. The file format to be produced. Can be 'binary' or
#     'upgrade.bin'.
output:

- filename: Upgrade.bin
  format: upgrade.bin

- filename: Upgrade.raw
  format: binary