NAND flash issue

[simonkbaby]

Hello,
I am trying boot from NAND with yocto generated files. I am able to flash the images using sam-ba-3.7. I am getting the below error while booting. Can someone help to resolve this issue.

I followed the steps mentioned in the link https://raw.githubusercontent.com/linux4sam/meta-atmel/kirkstone/README.

During bootup it failed. Below is the log.

AT91Bootstrap 4.0.8-rc4 (2023-12-14 13:49:11)
NAND: ONFI flash detected
NAND: Manufacturer ID: 0x2c Chip ID: 0xda
NAND: Page Bytes: 2048, Spare Bytes: 64
NAND: ECC Correctability Bits: 4, ECC Sector Bytes: 512
NAND: Disable On-Die ECC
NAND: Initialize PMECC params, cap: 4, sector: 512
NAND: Image: Copy 0xc0000 bytes from 0x40000 to 0x26f00000

******PMECC: failed to correct corrupted bits!

NAND: Failed to load image******

SAM-BA logs
Applet 'Low-Level' from SAM-BA Applets Framework 3.7 (v3.7-beta1-49-g06f8d322).
Current processor clock: 528 MHz
Clocks are already configured.

Applet 'NAND Flash' from SAM-BA Applets Framework 3.7 (v3.7-beta1-49-g06f8d322).
Initializing NAND ioSet1 Bus Width 8
PMECC configuration: 0xc0902405
Sector size: 512
Sectors per page: 4
Spare size: 64
ECC bits: 4
ECC offset: 36
ECC size: 28
PMECC enabled
Buffer Address: 0x0030a540
Buffer Size: 22528 bytes
NAND applet initialized successfully.

[simonkbaby]

I am building the image for sama5d3_xplained board. Below is the yocto logs during building.

tdydev@eadlng-build-machine:~/workspace/nic-yocto-build/ecp-nic-test/build$ MACHINE=sama5d3-xplained bitbake microchip-headless-image
Loading cache: 100% |############################################################################################################################################################################| Time: 0:00:00
Loaded 4099 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION = "2.0.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "universal"
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "sama5d3-xplained"
DISTRO = "poky-atmel"
DISTRO_VERSION = "4.0.13"
TUNE_FEATURES = "arm vfp cortexa5 thumb callconvention-hard"
TARGET_FPU = "hard"
meta
meta-poky
meta-yocto-bsp = "kirkstone:e51bf557f596c4da38789a948a3228ba11455e3c"
meta-oe
meta-networking
meta-webserver
meta-python
meta-initramfs = "kirkstone:79a6f60dabad9e5b0e041efa91379447ef030482"
meta-atmel = "kirkstone:128bf04cb75902e239a145f0e84f6147aef2ff4b"
meta-multimedia = "kirkstone:79a6f60dabad9e5b0e041efa91379447ef030482"
meta-arm
meta-arm-toolchain = "kirkstone:bafd1d013c2470bcec123ba4eb8232ab879b2660"