MKS 1.1 Board - Map Drive Windows - DavWWWRoot

[matteool]

I have a twotrees tts55 laser engraver with the mks 1.1 TS35 board.
can someone explain to me how to connect the card to windows via wifi?

With this webui I saw that esp32 wifi can be configured and I set it.
but from windows I don't get any response typing this address "\192.168.1.40\DavWWWRoot"
I also tried "\192.168.1.40:8080\DavWWWRoot"

I have another esp32 card to network a microsd connected to the 3d printer and that works, so windows is enabled for network disks

Maybe I'm missing something and you can help me

Also to update the webui just update the index.gz file or do I have to do something else?

thank you all

[luc-github]

the webdav is only working on flash and direct sd/shared sd, not on serial connection
what version of esp3d are you using ?

[matteool]

i have the board with the micro sd slot.
the version of esp3d is:
Firmware: V2.08(8M.H35.20220105) / Board Version: MKS DLC32 V1.0
in addition to the index file do I have to load other files to make the system work?

thanks for your reply

[luc-github]

I think you misunderstood the usage of ESP3D
ESP3D is only for ESP boards connected to main printer/cnc board
ESP3DLib for Marlin is only for ESP32 board as main board and currently MKS DLC32 V1.0 is not supported by Marlin out of the box

if you want a FW for your MKS DLC32 V1.0 using ESP3D-WEBUI:

• use grbl_esp32 FW but it is no more supported, dev moved to another FW which does not use ESP3D-WEBUI
• grblHAL for esp32 : https://github.com/grblHAL/ESP32

[matteool]

Thank you for your answer.
I was looking for a way to save gcode files directly to sd memory without having to upload from the web.
i know your gui is designed for that but i wanted to ask anyway

[luc-github]

The index.html.gz depend on what firmware is using it :
https://github.com/luc-github/ESP3D-WEBUI/tree/3.0/dist