Nod On SIN-2-1-01 & Nod On SIN-2-RS-01 #36
-
|
I'm sorry if the device is already supported and I just can't figure out how to get it work. I figured out the ID of my EnOcean devices (I started with two lights and one roller shutter) and entered it in the When I switch the relays through the mechanical switches I also see an update in the Log. This is the complete Logfile including the information from the switches: I only seem to be able to read the states and I have not found a way to switch the state of the device through Home Assistant. |
Beta Was this translation helpful? Give feedback.
Replies: 2 comments 8 replies
-
|
Hi, First, your lights configuration are wrong. Then, if not done yet, you have to pair your EnOcean dongle to your NodOn modules, so that your dongle can control your modules. |
Beta Was this translation helpful? Give feedback.
-
|
It seems that your SIN-2-1-01 are D2-01-0F instead of D2-01-12. To do that, for each of your SIN-2-1-01, you will have to:
Please report then if everything is still OK. Regarding your shutter, I know that some users have it inverted as yours. payload_open: >-
{"CMD":"1","POS":"100","ANG":"127","REPO":"0","LOCK":"0","CHN":"0","send":"clear"}
payload_close: >-
{"CMD":"1","POS":"0","ANG":"127","REPO":"0","LOCK":"0","CHN":"0","send":"clear"}I have to find a better way to handle that ... |
Beta Was this translation helpful? Give feedback.
-
|
So I managed to integrate everything properly now. The shutters actually where only inverted when looking at it under devices. As soon as I tried opening and closing them with the "Shutter Card" it worked fine. EnOcean was the most reliable way of communication in my old system and that's why I spend a lot of money on the relays. You are really making such a difference with your new integration. Thanks a lot! |
Beta Was this translation helpful? Give feedback.
-
|
Hello, I have the same shutter modules and tried this workaround, but it didn‘t invert the positioning. I have added the devices first and stumbled across this later. Do I need to delete them and learn them in again, or do I need to modify the mapping.yaml beside the given answer? Regards |
Beta Was this translation helpful? Give feedback.
-
|
Hey, I also had to change the state in my shutter-card that I used. It said in the documentation how to do that. In my case it was only adding the line invert_percentage: true |
Beta Was this translation helpful? Give feedback.
-
|
Hi, Thank you for your reply. Regards |
Beta Was this translation helpful? Give feedback.
-
|
Since it does fit (nearly similar to the SIM and MSP only seem to have a differnt housing) No hurry but it's of some interest to me because I can currently get these MSP -02-1-11 ones as cheap as you find zigbee crap everywhere. Notmally EnOcean devices are a bit more expensive. And i wanted to find out about how accuracte the metering is. |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
Hi,
First, your lights configuration are wrong.
It can't be F6-02-02 as this is the EEP for rocker switch.
I think it is D2-01-12. So, rewrite your enoceanmqtt.devices to take into account this.
You should have something like:
Then, if not done yet, you have to pair your EnOcean dongle to your NodOn modules, so that your dongle can control your modules.
This should be explained in the user manual of your modules.
For more details, look at Pairing your device.